Aren
/
NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
NetBSD/sys/arch/amigappc/conf/GENERIC

470 lines
16 KiB
Plaintext
Raw Normal View History

dependant -> dependent
2011-07-01 00:09:15 +04:00
# $NetBSD: GENERIC,v 1.8 2011/06/30 20:09:19 wiz Exp $
Some improvements based on the work of Adam Ciarcinski. Adapted everything to integrate with current 5.99 source. Added an Amiga PIC for interrupt handling. Status: A CSPPC machine probably boots into single user, but only few devices will attach without problems (e.g. keyboard, serial, parallel, floppy disk, the RTC, CC graphics, sometimes Ariande ethernet and A4000 IDE. BPPC support is prepared, but unfinished and untested (I don't own a BPPC). A problem which has to be solved is interrupt acknowledging, which may happen twice. Once in the amiga drivers from sys/arch/amiga/dev and then in the PPC specific pic_amiga.c.
2009-07-21 13:49:15 +04:00
#
# GENERIC machine description file
#
# This machine description file is used to generate the default NetBSD
# kernel. The generic kernel does not include all options, subsystems
# and device drivers, but should be useful for most applications.
#
# The machine description file can be customised for your specific
# machine to reduce the kernel size and improve its performance.
#
# For further information on compiling NetBSD kernels, see the config(8)
# man page.
#
# For further information on hardware support for this architecture, see
# the intro(4) man page. For further information about kernel options
# for this architecture, see the options(4) man page. For an explanation
# of each device driver in this file see the section 4 man page for the
# device.
include "arch/amigappc/conf/std.amigappc"
options INCLUDE_CONFIG_FILE # embed config file in kernel binary
dependant -> dependent
2011-07-01 00:09:15 +04:00
#ident "GENERIC-$Revision: 1.8 $"
Some improvements based on the work of Adam Ciarcinski. Adapted everything to integrate with current 5.99 source. Added an Amiga PIC for interrupt handling. Status: A CSPPC machine probably boots into single user, but only few devices will attach without problems (e.g. keyboard, serial, parallel, floppy disk, the RTC, CC graphics, sometimes Ariande ethernet and A4000 IDE. BPPC support is prepared, but unfinished and untested (I don't own a BPPC). A problem which has to be solved is interrupt acknowledging, which may happen twice. Once in the amiga drivers from sys/arch/amiga/dev and then in the PPC specific pic_amiga.c.
2009-07-21 13:49:15 +04:00
maxusers 8
#
# Mainboards to support (in addition to Amiga)
#
options BB060STUPIDROM # You need this, if you have a non-DraCo
# MC68060 with an OS ROM up to (at least)
# V40 (OS3.1) and want to boot with the
# bootblock.
# You do not need this if you have a DraCo,
# have no 68060 or NEVER use the bootblock
options P5PPC68KBOARD # Phase5 PPC/68K board support
#
# Standard system options
#
options INSECURE # disable kernel security levels
options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT
options NTP # NTP phase/frequency locked loop
options KTRACE # system call tracing support
options SCSIVERBOSE # human readable SCSI error messages
options USERCONF # userconf(4) support
#options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
#options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel
# Support for System V IPC facilities.
options SYSVSHM # System V-like shared memory
options SYSVMSG # System V-like messages
options SYSVSEM # System V-like semaphores
options P1003_1B_SEMAPHORE # p1003.1b semaphore support
# Enable experimental buffer queue strategy for better responsiveness under
# high disk I/O load. Use it with caution - it's not proven to be stable yet.
#options BUFQ_READPRIO
#options BUFQ_PRIOCSCAN
#
# Diagnostic/debugging support options
#
Enable all devices which can be compiled. (Tested, or even working, are only few of them.)
2010-02-03 17:03:47 +03:00
#options DIAGNOSTIC # Extra kernel sanity checks
#options DEBUG # Enable misc. kernel debugging code
#options DEBUG_KERNEL_START
Some improvements based on the work of Adam Ciarcinski. Adapted everything to integrate with current 5.99 source. Added an Amiga PIC for interrupt handling. Status: A CSPPC machine probably boots into single user, but only few devices will attach without problems (e.g. keyboard, serial, parallel, floppy disk, the RTC, CC graphics, sometimes Ariande ethernet and A4000 IDE. BPPC support is prepared, but unfinished and untested (I don't own a BPPC). A problem which has to be solved is interrupt acknowledging, which may happen twice. Once in the amiga drivers from sys/arch/amiga/dev and then in the PPC specific pic_amiga.c.
2009-07-21 13:49:15 +04:00
#options KMEMSTATS # kernel memory statistics (vmstat -m)
options DDB # in-kernel debugger
Enable all devices which can be compiled. (Tested, or even working, are only few of them.)
2010-02-03 17:03:47 +03:00
#options DDB_ONPANIC=1 # see also sysctl(8): `ddb.onpanic'
Some improvements based on the work of Adam Ciarcinski. Adapted everything to integrate with current 5.99 source. Added an Amiga PIC for interrupt handling. Status: A CSPPC machine probably boots into single user, but only few devices will attach without problems (e.g. keyboard, serial, parallel, floppy disk, the RTC, CC graphics, sometimes Ariande ethernet and A4000 IDE. BPPC support is prepared, but unfinished and untested (I don't own a BPPC). A problem which has to be solved is interrupt acknowledging, which may happen twice. Once in the amiga drivers from sys/arch/amiga/dev and then in the PPC specific pic_amiga.c.
2009-07-21 13:49:15 +04:00
options DDB_HISTORY_SIZE=512 # Enable history editing in DDB
Enable all devices which can be compiled. (Tested, or even working, are only few of them.)
2010-02-03 17:03:47 +03:00
#options SCSIDEBUG # Add SCSI debugging statements
Some improvements based on the work of Adam Ciarcinski. Adapted everything to integrate with current 5.99 source. Added an Amiga PIC for interrupt handling. Status: A CSPPC machine probably boots into single user, but only few devices will attach without problems (e.g. keyboard, serial, parallel, floppy disk, the RTC, CC graphics, sometimes Ariande ethernet and A4000 IDE. BPPC support is prepared, but unfinished and untested (I don't own a BPPC). A problem which has to be solved is interrupt acknowledging, which may happen twice. Once in the amiga drivers from sys/arch/amiga/dev and then in the PPC specific pic_amiga.c.
2009-07-21 13:49:15 +04:00
#options SERCONSOLE # console via Amiga serial port
Enable all devices which can be compiled. (Tested, or even working, are only few of them.)
2010-02-03 17:03:47 +03:00
#makeoptions DEBUG="-g" # compile full symbol table
Some improvements based on the work of Adam Ciarcinski. Adapted everything to integrate with current 5.99 source. Added an Amiga PIC for interrupt handling. Status: A CSPPC machine probably boots into single user, but only few devices will attach without problems (e.g. keyboard, serial, parallel, floppy disk, the RTC, CC graphics, sometimes Ariande ethernet and A4000 IDE. BPPC support is prepared, but unfinished and untested (I don't own a BPPC). A problem which has to be solved is interrupt acknowledging, which may happen twice. Once in the amiga drivers from sys/arch/amiga/dev and then in the PPC specific pic_amiga.c.
2009-07-21 13:49:15 +04:00
#
# Compatibility option
#
options COMPAT_09 # NetBSD 0.9,
options COMPAT_10 # NetBSD 1.0,
options COMPAT_11 # NetBSD 1.1,
options COMPAT_12 # NetBSD 1.2,
options COMPAT_13 # NetBSD 1.3,
options COMPAT_14 # NetBSD 1.4,
options COMPAT_15 # NetBSD 1.5,
options COMPAT_16 # NetBSD 1.6,
options COMPAT_20 # NetBSD 2.0,
options COMPAT_30 # NetBSD 3.0 compatibility.
options COMPAT_40 # NetBSD 4.0 compatibility.
options COMPAT_50 # NetBSD 5.0 compatibility.
options COMPAT_43 # and 4.3BSD
Enable all devices which can be compiled. (Tested, or even working, are only few of them.)
2010-02-03 17:03:47 +03:00
#options COMPAT_386BSD_MBRPART # recognize old partition ID
Some improvements based on the work of Adam Ciarcinski. Adapted everything to integrate with current 5.99 source. Added an Amiga PIC for interrupt handling. Status: A CSPPC machine probably boots into single user, but only few devices will attach without problems (e.g. keyboard, serial, parallel, floppy disk, the RTC, CC graphics, sometimes Ariande ethernet and A4000 IDE. BPPC support is prepared, but unfinished and untested (I don't own a BPPC). A problem which has to be solved is interrupt acknowledging, which may happen twice. Once in the amiga drivers from sys/arch/amiga/dev and then in the PPC specific pic_amiga.c.
2009-07-21 13:49:15 +04:00
#options COMPAT_LINUX # Linux binary compatibility
#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended.
options COMPAT_BSDPTY # /dev/[pt]ty?? ptys.
#
# File systems
#
file-system FFS # UFS
Enable all devices which can be compiled. (Tested, or even working, are only few of them.)
2010-02-03 17:03:47 +03:00
file-system EXT2FS # second extended file system (linux)
file-system LFS # log-structured file system
file-system MFS # memory file system
file-system NFS # Network file System client
file-system CD9660 # ISO 9660 + Rock Ridge file system
file-system MSDOSFS # MS-DOS file system
Some improvements based on the work of Adam Ciarcinski. Adapted everything to integrate with current 5.99 source. Added an Amiga PIC for interrupt handling. Status: A CSPPC machine probably boots into single user, but only few devices will attach without problems (e.g. keyboard, serial, parallel, floppy disk, the RTC, CC graphics, sometimes Ariande ethernet and A4000 IDE. BPPC support is prepared, but unfinished and untested (I don't own a BPPC). A problem which has to be solved is interrupt acknowledging, which may happen twice. Once in the amiga drivers from sys/arch/amiga/dev and then in the PPC specific pic_amiga.c.
2009-07-21 13:49:15 +04:00
file-system ADOSFS # AmigaDOS file system
file-system FDESC # /dev/fd
file-system KERNFS # /kern
Enable all devices which can be compiled. (Tested, or even working, are only few of them.)
2010-02-03 17:03:47 +03:00
file-system NULLFS # loopback file system
file-system OVERLAY # overlay file system
Some improvements based on the work of Adam Ciarcinski. Adapted everything to integrate with current 5.99 source. Added an Amiga PIC for interrupt handling. Status: A CSPPC machine probably boots into single user, but only few devices will attach without problems (e.g. keyboard, serial, parallel, floppy disk, the RTC, CC graphics, sometimes Ariande ethernet and A4000 IDE. BPPC support is prepared, but unfinished and untested (I don't own a BPPC). A problem which has to be solved is interrupt acknowledging, which may happen twice. Once in the amiga drivers from sys/arch/amiga/dev and then in the PPC specific pic_amiga.c.
2009-07-21 13:49:15 +04:00
file-system PROCFS # /proc
Enable all devices which can be compiled. (Tested, or even working, are only few of them.)
2010-02-03 17:03:47 +03:00
file-system UMAPFS # NULLFS + uid and gid remapping
file-system UNION # union file system
Some improvements based on the work of Adam Ciarcinski. Adapted everything to integrate with current 5.99 source. Added an Amiga PIC for interrupt handling. Status: A CSPPC machine probably boots into single user, but only few devices will attach without problems (e.g. keyboard, serial, parallel, floppy disk, the RTC, CC graphics, sometimes Ariande ethernet and A4000 IDE. BPPC support is prepared, but unfinished and untested (I don't own a BPPC). A problem which has to be solved is interrupt acknowledging, which may happen twice. Once in the amiga drivers from sys/arch/amiga/dev and then in the PPC specific pic_amiga.c.
2009-07-21 13:49:15 +04:00
file-system SMBFS # experimental - CIFS; also needs nsmb (below)
file-system PTYFS # /dev/pts/N support
file-system TMPFS # Efficient memory file-system
#file-system UDF # experimental - OSTA UDF CD/DVD file-system
# File system options
dependant -> dependent
2011-07-01 00:09:15 +04:00
#options FFS_EI # FFS Endian Independent support
Some improvements based on the work of Adam Ciarcinski. Adapted everything to integrate with current 5.99 source. Added an Amiga PIC for interrupt handling. Status: A CSPPC machine probably boots into single user, but only few devices will attach without problems (e.g. keyboard, serial, parallel, floppy disk, the RTC, CC graphics, sometimes Ariande ethernet and A4000 IDE. BPPC support is prepared, but unfinished and untested (I don't own a BPPC). A problem which has to be solved is interrupt acknowledging, which may happen twice. Once in the amiga drivers from sys/arch/amiga/dev and then in the PPC specific pic_amiga.c.
2009-07-21 13:49:15 +04:00
options WAPBL # File system journaling support - Experimental
merge the bouyer-quota2 branch. This adds a new on-disk format to store disk quota usage and limits, integrated with ffs metadata. Usage is checked by fsck_ffs (no more quotacheck) and is covered by the WAPBL journal. Enabled with kernel option QUOTA2 (added where QUOTA was enabled in kernel config files), turned on with tunefs(8) on a per-filesystem basis. mount_mfs(8) can also turn quotas on. See http://mail-index.netbsd.org/tech-kern/2011/02/19/msg010025.html for details.
2011-03-06 20:08:10 +03:00
options QUOTA # legacy UFS quotas
options QUOTA2 # new, in-filesystem UFS quotas
Some improvements based on the work of Adam Ciarcinski. Adapted everything to integrate with current 5.99 source. Added an Amiga PIC for interrupt handling. Status: A CSPPC machine probably boots into single user, but only few devices will attach without problems (e.g. keyboard, serial, parallel, floppy disk, the RTC, CC graphics, sometimes Ariande ethernet and A4000 IDE. BPPC support is prepared, but unfinished and untested (I don't own a BPPC). A problem which has to be solved is interrupt acknowledging, which may happen twice. Once in the amiga drivers from sys/arch/amiga/dev and then in the PPC specific pic_amiga.c.
2009-07-21 13:49:15 +04:00
#options UFS_DIRHASH # UFS Large Directory Hashing - Experimental
Enable all devices which can be compiled. (Tested, or even working, are only few of them.)
2010-02-03 17:03:47 +03:00
options NFSSERVER # Network File System server side code
Some improvements based on the work of Adam Ciarcinski. Adapted everything to integrate with current 5.99 source. Added an Amiga PIC for interrupt handling. Status: A CSPPC machine probably boots into single user, but only few devices will attach without problems (e.g. keyboard, serial, parallel, floppy disk, the RTC, CC graphics, sometimes Ariande ethernet and A4000 IDE. BPPC support is prepared, but unfinished and untested (I don't own a BPPC). A problem which has to be solved is interrupt acknowledging, which may happen twice. Once in the amiga drivers from sys/arch/amiga/dev and then in the PPC specific pic_amiga.c.
2009-07-21 13:49:15 +04:00
#options FFS_NO_SNAPSHOT # No FFS snapshot support
#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
# immutable) behave as system flags.
#
# Networking options
#
Enable all devices which can be compiled. (Tested, or even working, are only few of them.)
2010-02-03 17:03:47 +03:00
#options GATEWAY # Packet forwarding
Some improvements based on the work of Adam Ciarcinski. Adapted everything to integrate with current 5.99 source. Added an Amiga PIC for interrupt handling. Status: A CSPPC machine probably boots into single user, but only few devices will attach without problems (e.g. keyboard, serial, parallel, floppy disk, the RTC, CC graphics, sometimes Ariande ethernet and A4000 IDE. BPPC support is prepared, but unfinished and untested (I don't own a BPPC). A problem which has to be solved is interrupt acknowledging, which may happen twice. Once in the amiga drivers from sys/arch/amiga/dev and then in the PPC specific pic_amiga.c.
2009-07-21 13:49:15 +04:00
options INET # IP networking support (Required)
options INET6 # IPV6
#options IPSEC # IP security
#options IPSEC_ESP # IP security (encryption part; define w/IPSEC)
#options IPSEC_NAT_T # IPsec NAT traversal (NAT-T)
#options IPSEC_DEBUG # debug for IP security
#options MROUTING # Multicast routing
Enable all devices which can be compiled. (Tested, or even working, are only few of them.)
2010-02-03 17:03:47 +03:00
#options DIRECTED_BROADCAST # Broadcast across subnets
Some improvements based on the work of Adam Ciarcinski. Adapted everything to integrate with current 5.99 source. Added an Amiga PIC for interrupt handling. Status: A CSPPC machine probably boots into single user, but only few devices will attach without problems (e.g. keyboard, serial, parallel, floppy disk, the RTC, CC graphics, sometimes Ariande ethernet and A4000 IDE. BPPC support is prepared, but unfinished and untested (I don't own a BPPC). A problem which has to be solved is interrupt acknowledging, which may happen twice. Once in the amiga drivers from sys/arch/amiga/dev and then in the PPC specific pic_amiga.c.
2009-07-21 13:49:15 +04:00
#options PIM # Protocol Independent Multicast
#options ISO,TPIP # OSI
#options EON # OSI tunneling over IP
#options NETATALK # AppleTalk networking protocols
options PPP_BSDCOMP # BSD-Compress compression support for PPP
options PPP_DEFLATE # Deflate compression support for PPP
options PPP_FILTER # Active filter support for PPP (requires bpf)
options PFIL_HOOKS # pfil(9) packet filter hooks
options IPFILTER_LOG # ipmon(8) log support
options IPFILTER_LOOKUP # ippool(8) support
enable IPFILTER_COMPAT in all kernels that have ipfilter already. canonicalise several of the ipf option segments in various files (this mostly means adding commented out IPFILTER_DEFAULT_BLOCK, or adding commented or uncommented IPFILTER_LOG or IPFILTER_LOOKUP option statements.) i built about 20 of these kernels to check, but not all of them.
2010-05-09 02:16:25 +04:00
options IPFILTER_COMPAT # Compat for IP-Filter
Some improvements based on the work of Adam Ciarcinski. Adapted everything to integrate with current 5.99 source. Added an Amiga PIC for interrupt handling. Status: A CSPPC machine probably boots into single user, but only few devices will attach without problems (e.g. keyboard, serial, parallel, floppy disk, the RTC, CC graphics, sometimes Ariande ethernet and A4000 IDE. BPPC support is prepared, but unfinished and untested (I don't own a BPPC). A problem which has to be solved is interrupt acknowledging, which may happen twice. Once in the amiga drivers from sys/arch/amiga/dev and then in the PPC specific pic_amiga.c.
2009-07-21 13:49:15 +04:00
#options IPFILTER_DEFAULT_BLOCK # block all packets by default
Enable all devices which can be compiled. (Tested, or even working, are only few of them.)
2010-02-03 17:03:47 +03:00
#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
Some improvements based on the work of Adam Ciarcinski. Adapted everything to integrate with current 5.99 source. Added an Amiga PIC for interrupt handling. Status: A CSPPC machine probably boots into single user, but only few devices will attach without problems (e.g. keyboard, serial, parallel, floppy disk, the RTC, CC graphics, sometimes Ariande ethernet and A4000 IDE. BPPC support is prepared, but unfinished and untested (I don't own a BPPC). A problem which has to be solved is interrupt acknowledging, which may happen twice. Once in the amiga drivers from sys/arch/amiga/dev and then in the PPC specific pic_amiga.c.
2009-07-21 13:49:15 +04:00
#options ALTQ # Manipulate network interfaces' output queues
#options ALTQ_BLUE # Stochastic Fair Blue
#options ALTQ_CBQ # Class-Based Queueing
#options ALTQ_CDNR # Diffserv Traffic Conditioner
#options ALTQ_FIFOQ # First-In First-Out Queue
#options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box)
#options ALTQ_HFSC # Hierarchical Fair Service Curve
#options ALTQ_LOCALQ # Local queueing discipline
#options ALTQ_PRIQ # Priority Queueing
#options ALTQ_RED # Random Early Detection
#options ALTQ_RIO # RED with IN/OUT
#options ALTQ_WFQ # Weighted Fair Queueing
#
# Amiga specific options
#
Enable all devices which can be compiled. (Tested, or even working, are only few of them.)
2010-02-03 17:03:47 +03:00
options RETINACONSOLE # enable code to allow retina to be console
options ULOWELLCONSOLE # enable code to allow a2410 to be console
options CL5426CONSOLE # Cirrus console
options CV64CONSOLE # CyberVision console
options TSENGCONSOLE # Tseng console
options CV3DCONSOLE # CyberVision 64/3D console
Some improvements based on the work of Adam Ciarcinski. Adapted everything to integrate with current 5.99 source. Added an Amiga PIC for interrupt handling. Status: A CSPPC machine probably boots into single user, but only few devices will attach without problems (e.g. keyboard, serial, parallel, floppy disk, the RTC, CC graphics, sometimes Ariande ethernet and A4000 IDE. BPPC support is prepared, but unfinished and untested (I don't own a BPPC). A problem which has to be solved is interrupt acknowledging, which may happen twice. Once in the amiga drivers from sys/arch/amiga/dev and then in the PPC specific pic_amiga.c.
2009-07-21 13:49:15 +04:00
options GRF_ECS # Enhanced Chip Set
options GRF_NTSC # NTSC
options GRF_PAL # PAL
Enable all devices which can be compiled. (Tested, or even working, are only few of them.)
2010-02-03 17:03:47 +03:00
options GRF_A2024 # Support for the A2024
options GRF_AGA # AGA Chip Set
options GRF_AGA_VGA # AGA VGAONLY timing
options GRF_SUPER72 # AGA Super-72
Some improvements based on the work of Adam Ciarcinski. Adapted everything to integrate with current 5.99 source. Added an Amiga PIC for interrupt handling. Status: A CSPPC machine probably boots into single user, but only few devices will attach without problems (e.g. keyboard, serial, parallel, floppy disk, the RTC, CC graphics, sometimes Ariande ethernet and A4000 IDE. BPPC support is prepared, but unfinished and untested (I don't own a BPPC). A problem which has to be solved is interrupt acknowledging, which may happen twice. Once in the amiga drivers from sys/arch/amiga/dev and then in the PPC specific pic_amiga.c.
2009-07-21 13:49:15 +04:00
#options KFONT_8X11 # 8x11 font
# select a font for the console according to the character set and keymap
# you want to use
options KFONT_CONS_ISO8859_1
#options KFONT_CONS_ISO8859_2
# This is how you would tell the kernel the A2410 oscillator frequencies:
# The used frequencies are the defaults, and do not need option setting
#options ULOWELL_OSC1=36000000
#options ULOWELL_OSC2=66667000
# This is how you specify the blitting speed, higher values may speed up blits
# a littel bit. If you raise this value too much some trash may appear.
# the commented version is the default.
#options RH_MEMCLK=61000000
# this option enables the 64 bit sprite which does not work
# for quite a few people. E.g. The cursor sprite will turn to a block
# when moved to the top of the screen in X.
#options RH_64BIT_SPRITE
# enables fast scroll code appears to now work on 040 systems.
#options RETINA_SPEED_HACK
# enables the Hardwarecursor which does not work on some systems.
#options RH_HARDWARECURSOR
#
# Device configuration
#
mainbus0 at root
cpu0 at mainbus0
kbd0 at mainbus0 # Amiga keyboard
zbus0 at mainbus0 # ZorroII/III expansion bus
ser0 at mainbus0 # Amiga onboard serial
par0 at mainbus0 # Amiga onboard parallel
ms* at mainbus0 # Amiga mice
fdc0 at mainbus0 # Amiga FDC
fd* at fdc0 unit ? # floppy disks on the later
a34kbbc0 at mainbus0 # A3000/A4000 battery backed clock
Enable all devices which can be compiled. (Tested, or even working, are only few of them.)
2010-02-03 17:03:47 +03:00
aucc* at mainbus0 # Amiga CC audio
audio* at aucc?
Some improvements based on the work of Adam Ciarcinski. Adapted everything to integrate with current 5.99 source. Added an Amiga PIC for interrupt handling. Status: A CSPPC machine probably boots into single user, but only few devices will attach without problems (e.g. keyboard, serial, parallel, floppy disk, the RTC, CC graphics, sometimes Ariande ethernet and A4000 IDE. BPPC support is prepared, but unfinished and untested (I don't own a BPPC). A problem which has to be solved is interrupt acknowledging, which may happen twice. Once in the amiga drivers from sys/arch/amiga/dev and then in the PPC specific pic_amiga.c.
2009-07-21 13:49:15 +04:00
# wscons aware interface to amiga custom chips.
# If you enable it enable also wskbd.
#amidisplaycc0 at mainbus0 # wscons interface to custom chips
#wsdisplay0 at amidisplaycc0 console ?
#options WSEMUL_VT100
#options FONT_VT220L8x10
#options FONT_VT220ISO8x16
#
# Keyboard device. Optionally can attach a wskbd.
# wskbd works together with a wsdisplay so enable them both if you will.
# Don't enable wskbd if you use ite.
#
# XXX in std.amiga: kbd0 at mainbus0
#wskbd0 at kbd0 console ?
#wsmouse* at ms?
#
# Graphics devices
#
grfcc0 at mainbus0 # custom chips
Enable all devices which can be compiled. (Tested, or even working, are only few of them.)
2010-02-03 17:03:47 +03:00
grfrt0 at zbus0 # retina II
grfrh0 at zbus0 # retina III
grfcl* at zbus0 # Picasso II/Piccolo/Spectrum
grful0 at zbus0 # A2410
grfcv0 at zbus0 # CyberVision 64
grfet* at zbus0 # Tseng (oMniBus, Domino, Merlin)
grfcv3d0 at zbus0 # CyberVision 64/3D
Some improvements based on the work of Adam Ciarcinski. Adapted everything to integrate with current 5.99 source. Added an Amiga PIC for interrupt handling. Status: A CSPPC machine probably boots into single user, but only few devices will attach without problems (e.g. keyboard, serial, parallel, floppy disk, the RTC, CC graphics, sometimes Ariande ethernet and A4000 IDE. BPPC support is prepared, but unfinished and untested (I don't own a BPPC). A problem which has to be solved is interrupt acknowledging, which may happen twice. Once in the amiga drivers from sys/arch/amiga/dev and then in the PPC specific pic_amiga.c.
2009-07-21 13:49:15 +04:00
grf0 at grfcc0
Enable all devices which can be compiled. (Tested, or even working, are only few of them.)
2010-02-03 17:03:47 +03:00
grf1 at grfrt0
grf2 at grfrh0
grf3 at grfcl?
grf4 at grful0
grf5 at grfcv0
grf6 at grfet?
grf7 at grfcv3d0
Some improvements based on the work of Adam Ciarcinski. Adapted everything to integrate with current 5.99 source. Added an Amiga PIC for interrupt handling. Status: A CSPPC machine probably boots into single user, but only few devices will attach without problems (e.g. keyboard, serial, parallel, floppy disk, the RTC, CC graphics, sometimes Ariande ethernet and A4000 IDE. BPPC support is prepared, but unfinished and untested (I don't own a BPPC). A problem which has to be solved is interrupt acknowledging, which may happen twice. Once in the amiga drivers from sys/arch/amiga/dev and then in the PPC specific pic_amiga.c.
2009-07-21 13:49:15 +04:00
ite0 at grf0 # terminal emulators for grfs
Enable all devices which can be compiled. (Tested, or even working, are only few of them.)
2010-02-03 17:03:47 +03:00
ite1 at grf1 # terminal emulators for grfs
ite2 at grf2 # terminal emulators for grfs
ite3 at grf3 # terminal emulators for grfs
ite4 at grf4 # terminal emulators for grfs
ite5 at grf5 # terminal emulators for grfs
ite6 at grf6 # terminal emulators for grfs
ite7 at grf7 # terminal emulators for grfs
Some improvements based on the work of Adam Ciarcinski. Adapted everything to integrate with current 5.99 source. Added an Amiga PIC for interrupt handling. Status: A CSPPC machine probably boots into single user, but only few devices will attach without problems (e.g. keyboard, serial, parallel, floppy disk, the RTC, CC graphics, sometimes Ariande ethernet and A4000 IDE. BPPC support is prepared, but unfinished and untested (I don't own a BPPC). A problem which has to be solved is interrupt acknowledging, which may happen twice. Once in the amiga drivers from sys/arch/amiga/dev and then in the PPC specific pic_amiga.c.
2009-07-21 13:49:15 +04:00
#
# Zorro-II, Zorro-III devices (sans graphics)
#
Enable all devices which can be compiled. (Tested, or even working, are only few of them.)
2010-02-03 17:03:47 +03:00
repulse* at zbus0 # ALiENDESiGN Repulse
audio* at repulse?
Some improvements based on the work of Adam Ciarcinski. Adapted everything to integrate with current 5.99 source. Added an Amiga PIC for interrupt handling. Status: A CSPPC machine probably boots into single user, but only few devices will attach without problems (e.g. keyboard, serial, parallel, floppy disk, the RTC, CC graphics, sometimes Ariande ethernet and A4000 IDE. BPPC support is prepared, but unfinished and untested (I don't own a BPPC). A problem which has to be solved is interrupt acknowledging, which may happen twice. Once in the amiga drivers from sys/arch/amiga/dev and then in the PPC specific pic_amiga.c.
2009-07-21 13:49:15 +04:00
Enable all devices which can be compiled. (Tested, or even working, are only few of them.)
2010-02-03 17:03:47 +03:00
toccata* at zbus0 # MacroSystem GmbH Toccata
audio* at toccata?
Some improvements based on the work of Adam Ciarcinski. Adapted everything to integrate with current 5.99 source. Added an Amiga PIC for interrupt handling. Status: A CSPPC machine probably boots into single user, but only few devices will attach without problems (e.g. keyboard, serial, parallel, floppy disk, the RTC, CC graphics, sometimes Ariande ethernet and A4000 IDE. BPPC support is prepared, but unfinished and untested (I don't own a BPPC). A problem which has to be solved is interrupt acknowledging, which may happen twice. Once in the amiga drivers from sys/arch/amiga/dev and then in the PPC specific pic_amiga.c.
2009-07-21 13:49:15 +04:00
# Ethernet cards:
Enable all devices which can be compiled. (Tested, or even working, are only few of them.)
2010-02-03 17:03:47 +03:00
le* at zbus0 # A2065, Ameristar, Ariadne
ne* at zbus0 # AriadneII, X-surf
ed* at zbus0 # Hydra, ASDG LanRover
es* at zbus0 # CEI A4066 EthernetPLUS
qn* at zbus0 # Quicknet
Some improvements based on the work of Adam Ciarcinski. Adapted everything to integrate with current 5.99 source. Added an Amiga PIC for interrupt handling. Status: A CSPPC machine probably boots into single user, but only few devices will attach without problems (e.g. keyboard, serial, parallel, floppy disk, the RTC, CC graphics, sometimes Ariande ethernet and A4000 IDE. BPPC support is prepared, but unfinished and untested (I don't own a BPPC). A problem which has to be solved is interrupt acknowledging, which may happen twice. Once in the amiga drivers from sys/arch/amiga/dev and then in the PPC specific pic_amiga.c.
2009-07-21 13:49:15 +04:00
# Arcnet
Enable all devices which can be compiled. (Tested, or even working, are only few of them.)
2010-02-03 17:03:47 +03:00
bah* at zbus0 # C=/Ameristar A2060 / 560
Some improvements based on the work of Adam Ciarcinski. Adapted everything to integrate with current 5.99 source. Added an Amiga PIC for interrupt handling. Status: A CSPPC machine probably boots into single user, but only few devices will attach without problems (e.g. keyboard, serial, parallel, floppy disk, the RTC, CC graphics, sometimes Ariande ethernet and A4000 IDE. BPPC support is prepared, but unfinished and untested (I don't own a BPPC). A problem which has to be solved is interrupt acknowledging, which may happen twice. Once in the amiga drivers from sys/arch/amiga/dev and then in the PPC specific pic_amiga.c.
2009-07-21 13:49:15 +04:00
# Greater Valley Product Bus
Enable all devices which can be compiled. (Tested, or even working, are only few of them.)
2010-02-03 17:03:47 +03:00
gvpbus* at zbus0
Some improvements based on the work of Adam Ciarcinski. Adapted everything to integrate with current 5.99 source. Added an Amiga PIC for interrupt handling. Status: A CSPPC machine probably boots into single user, but only few devices will attach without problems (e.g. keyboard, serial, parallel, floppy disk, the RTC, CC graphics, sometimes Ariande ethernet and A4000 IDE. BPPC support is prepared, but unfinished and untested (I don't own a BPPC). A problem which has to be solved is interrupt acknowledging, which may happen twice. Once in the amiga drivers from sys/arch/amiga/dev and then in the PPC specific pic_amiga.c.
2009-07-21 13:49:15 +04:00
# scsi stuff, all possible
Enable all devices which can be compiled. (Tested, or even working, are only few of them.)
2010-02-03 17:03:47 +03:00
gtsc0 at gvpbus? # GVP series II scsi
scsibus* at gtsc0
Some improvements based on the work of Adam Ciarcinski. Adapted everything to integrate with current 5.99 source. Added an Amiga PIC for interrupt handling. Status: A CSPPC machine probably boots into single user, but only few devices will attach without problems (e.g. keyboard, serial, parallel, floppy disk, the RTC, CC graphics, sometimes Ariande ethernet and A4000 IDE. BPPC support is prepared, but unfinished and untested (I don't own a BPPC). A problem which has to be solved is interrupt acknowledging, which may happen twice. Once in the amiga drivers from sys/arch/amiga/dev and then in the PPC specific pic_amiga.c.
2009-07-21 13:49:15 +04:00
ahsc0 at mainbus0 # A3000 scsi
scsibus* at ahsc0
Enable all devices which can be compiled. (Tested, or even working, are only few of them.)
2010-02-03 17:03:47 +03:00
atzsc0 at zbus0 # A2091 scsi
scsibus* at atzsc0
wstsc0 at zbus0 # Wordsync II scsi
scsibus* at wstsc0
ivsc0 at zbus0 # IVS scsi
scsibus* at ivsc0
mlhsc0 at zbus0 # Hacker scsi
scsibus* at mlhsc0
otgsc0 at zbus0 # 12 gauge scsi
scsibus* at otgsc0
zssc0 at zbus0 # Zeus scsi
scsibus* at zssc0
mgnsc0 at zbus0 # Magnum scsi
scsibus* at mgnsc0
wesc0 at zbus0 # Warp Engine scsi
scsibus* at wesc0
Include new bppcsc(4) driver from amiga.
2011-01-14 15:54:39 +03:00
bppcsc0 at zbus0 # BlizzardPPC 603e+ scsi
scsibus* at bppcsc0
Enable all devices which can be compiled. (Tested, or even working, are only few of them.)
2010-02-03 17:03:47 +03:00
afsc0 at zbus0 # A4091 scsi
scsibus* at afsc0
aftsc0 at mainbus0 # A4000T scsi
scsibus* at aftsc0
flsc0 at zbus0 # FastlaneZ3 scsi
scsibus* at flsc0
bzsc0 at zbus0 # Blizzard 1230 I,II scsi
scsibus* at bzsc0
bzivsc0 at zbus0 # Blizzard 12x0 IV scsi
scsibus* at bzivsc0
bztzsc0 at zbus0 # Blizzard 2060 scsi
scsibus* at bztzsc0
cbsc0 at zbus0 # CyberSCSI I
scsibus* at cbsc0
cbiisc0 at zbus0 # CyberSCSI II
scsibus* at cbiisc0
cbiiisc0 at zbus0 # Cyberstorm mk.III/Cyberstorm PPC SCSI
scsibus* at cbiiisc0
empsc0 at zbus0 # Emplant scsi
scsibus* at empsc0
wdc0 at mainbus0 # A4000 & A1200 IDE bus
wdc* at zbus0 # Buddha / Catweasel
atabus* at wdc? channel ? # ATA bus
wd* at atabus? drive ? # + drives
atapibus* at atabus? # ATAPI bus
cd* at atapibus? drive ? # ATAPI CD-ROM drives
sd* at atapibus? drive ? # ATAPI disk drives
pccard0 at mainbus0
pcmcia* at pccard0
com* at pcmcia? function ? # Modems and serial cards
pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards
aic* at pcmcia? function ? # Adaptec APA-1460 SCSI
wdc* at pcmcia? function ?
awi* at pcmcia? function ? # BayStack 650 (802.11FH)
ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet
mbe* at pcmcia? function ? # MB8696x based Ethernet
ne* at pcmcia? function ? # NE2000-compatible Ethernet
sm* at pcmcia? function ? # Megahertz Ethernet
mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards
com* at mhzc?
sm* at mhzc?
Some improvements based on the work of Adam Ciarcinski. Adapted everything to integrate with current 5.99 source. Added an Amiga PIC for interrupt handling. Status: A CSPPC machine probably boots into single user, but only few devices will attach without problems (e.g. keyboard, serial, parallel, floppy disk, the RTC, CC graphics, sometimes Ariande ethernet and A4000 IDE. BPPC support is prepared, but unfinished and untested (I don't own a BPPC). A problem which has to be solved is interrupt acknowledging, which may happen twice. Once in the amiga drivers from sys/arch/amiga/dev and then in the PPC specific pic_amiga.c.
2009-07-21 13:49:15 +04:00
# each hard drive from low target to high
# will configure to the next available sd unit number
sd* at scsibus? target ? lun ? # scsi disks
Enable all devices which can be compiled. (Tested, or even working, are only few of them.)
2010-02-03 17:03:47 +03:00
st* at scsibus? target ? lun ? # scsi tapes
Some improvements based on the work of Adam Ciarcinski. Adapted everything to integrate with current 5.99 source. Added an Amiga PIC for interrupt handling. Status: A CSPPC machine probably boots into single user, but only few devices will attach without problems (e.g. keyboard, serial, parallel, floppy disk, the RTC, CC graphics, sometimes Ariande ethernet and A4000 IDE. BPPC support is prepared, but unfinished and untested (I don't own a BPPC). A problem which has to be solved is interrupt acknowledging, which may happen twice. Once in the amiga drivers from sys/arch/amiga/dev and then in the PPC specific pic_amiga.c.
2009-07-21 13:49:15 +04:00
cd* at scsibus? target ? lun ? # scsi cds
Enable all devices which can be compiled. (Tested, or even working, are only few of them.)
2010-02-03 17:03:47 +03:00
ch* at scsibus? target ? lun ? # scsi autochangers
ss* at scsibus? target ? lun ? # scsi scanner
Some improvements based on the work of Adam Ciarcinski. Adapted everything to integrate with current 5.99 source. Added an Amiga PIC for interrupt handling. Status: A CSPPC machine probably boots into single user, but only few devices will attach without problems (e.g. keyboard, serial, parallel, floppy disk, the RTC, CC graphics, sometimes Ariande ethernet and A4000 IDE. BPPC support is prepared, but unfinished and untested (I don't own a BPPC). A problem which has to be solved is interrupt acknowledging, which may happen twice. Once in the amiga drivers from sys/arch/amiga/dev and then in the PPC specific pic_amiga.c.
2009-07-21 13:49:15 +04:00
uk* at scsibus? target ? lun ? # scsi unknown
Enable all devices which can be compiled. (Tested, or even working, are only few of them.)
2010-02-03 17:03:47 +03:00
msc0 at zbus0 # A2232 MSC multiport serial.
mfc0 at zbus0 # MultiFaceCard I/O board
mfcs0 at mfc0 unit 0 # MFC serial
mfcs1 at mfc0 unit 1 # MFC serial
Some improvements based on the work of Adam Ciarcinski. Adapted everything to integrate with current 5.99 source. Added an Amiga PIC for interrupt handling. Status: A CSPPC machine probably boots into single user, but only few devices will attach without problems (e.g. keyboard, serial, parallel, floppy disk, the RTC, CC graphics, sometimes Ariande ethernet and A4000 IDE. BPPC support is prepared, but unfinished and untested (I don't own a BPPC). A problem which has to be solved is interrupt acknowledging, which may happen twice. Once in the amiga drivers from sys/arch/amiga/dev and then in the PPC specific pic_amiga.c.
2009-07-21 13:49:15 +04:00
#mfcp0 at mfc0 unit 0 # MFC parallel [not available yet]
#mfc1 at zbus0 # MultiFaceCard 2nd I/O board
#mfcs2 at mfc1 unit 0
#mfcs3 at mfc1 unit 1
#mfcp1 at mfc1 unit 0
Enable all devices which can be compiled. (Tested, or even working, are only few of them.)
2010-02-03 17:03:47 +03:00
hyper* at zbus? # zbus HyperCom3/3+/4/4+
Some improvements based on the work of Adam Ciarcinski. Adapted everything to integrate with current 5.99 source. Added an Amiga PIC for interrupt handling. Status: A CSPPC machine probably boots into single user, but only few devices will attach without problems (e.g. keyboard, serial, parallel, floppy disk, the RTC, CC graphics, sometimes Ariande ethernet and A4000 IDE. BPPC support is prepared, but unfinished and untested (I don't own a BPPC). A problem which has to be solved is interrupt acknowledging, which may happen twice. Once in the amiga drivers from sys/arch/amiga/dev and then in the PPC specific pic_amiga.c.
2009-07-21 13:49:15 +04:00
#hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3
Enable all devices which can be compiled. (Tested, or even working, are only few of them.)
2010-02-03 17:03:47 +03:00
com* at hyper? port ? # Hypercom3/4 serial ports
lpt* at hyper? port ? # Hypercom3+/4+ parallel port
Some improvements based on the work of Adam Ciarcinski. Adapted everything to integrate with current 5.99 source. Added an Amiga PIC for interrupt handling. Status: A CSPPC machine probably boots into single user, but only few devices will attach without problems (e.g. keyboard, serial, parallel, floppy disk, the RTC, CC graphics, sometimes Ariande ethernet and A4000 IDE. BPPC support is prepared, but unfinished and untested (I don't own a BPPC). A problem which has to be solved is interrupt acknowledging, which may happen twice. Once in the amiga drivers from sys/arch/amiga/dev and then in the PPC specific pic_amiga.c.
2009-07-21 13:49:15 +04:00
#options IOBZCLOCK=22118400 # default, uncomment the next line
#options IOBZCLOCK=24000000 # if needed.
Enable all devices which can be compiled. (Tested, or even working, are only few of them.)
2010-02-03 17:03:47 +03:00
iobl* at zbus? # zbus IOBlix
com* at iobl? port ? # IOBlix serial ports
lpt* at iobl? port ? # IOBlix parallel ports
Some improvements based on the work of Adam Ciarcinski. Adapted everything to integrate with current 5.99 source. Added an Amiga PIC for interrupt handling. Status: A CSPPC machine probably boots into single user, but only few devices will attach without problems (e.g. keyboard, serial, parallel, floppy disk, the RTC, CC graphics, sometimes Ariande ethernet and A4000 IDE. BPPC support is prepared, but unfinished and untested (I don't own a BPPC). A problem which has to be solved is interrupt acknowledging, which may happen twice. Once in the amiga drivers from sys/arch/amiga/dev and then in the PPC specific pic_amiga.c.
2009-07-21 13:49:15 +04:00
#
# accept filters
pseudo-device accf_data # "dataready" accept filter
pseudo-device accf_http # "httpready" accept filter
pseudo-device loop # loopback network interface
pseudo-device sl # SLIP network interfaces
pseudo-device ppp # PPP network interfaces
pseudo-device pppoe # PPP over Ethernet (RFC 2516)
pseudo-device tun # network tunnel line discipline
pseudo-device tap # virtual Ethernet
#pseudo-device gre # generic L3 over IP tunnel
pseudo-device bpfilter # Berkeley packet filter
#pseudo-device carp # Common Address Redundancy Protocol
pseudo-device ipfilter # IP Filter package
pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933)
#pseudo-device faith # IPv[46] tcp relay translation i/f
pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation
pseudo-device vlan # IEEE 802.1q encapsulation
pseudo-device bridge # simple inter-network bridging
#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too
pseudo-device agr # IEEE 802.3ad link aggregation
#pseudo-device pf # PF packet filter
#pseudo-device pflog # PF log if
Remove unused count (invariably "4") from pseudo-device fss.
2010-04-16 17:48:27 +04:00
pseudo-device fss # file system snapshot device
Some improvements based on the work of Adam Ciarcinski. Adapted everything to integrate with current 5.99 source. Added an Amiga PIC for interrupt handling. Status: A CSPPC machine probably boots into single user, but only few devices will attach without problems (e.g. keyboard, serial, parallel, floppy disk, the RTC, CC graphics, sometimes Ariande ethernet and A4000 IDE. BPPC support is prepared, but unfinished and untested (I don't own a BPPC). A problem which has to be solved is interrupt acknowledging, which may happen twice. Once in the amiga drivers from sys/arch/amiga/dev and then in the PPC specific pic_amiga.c.
2009-07-21 13:49:15 +04:00
pseudo-device view 4 # views (needed for grfcc)
pseudo-device pty # pseudo-terminals
pseudo-device clockctl # user control of clock subsystem
#pseudo-device wsfont # wsfont(4) dynamic font loading support
#pseudo-device wsmux # mouse & keyboard multiplexor
pseudo-device vnd # vnode pseudo-disks
#options VND_COMPRESSION # compressed vnd(4)
pseudo-device ccd 4 # concatenated disk devices
#pseudo-device cgd 4 # cryptographic disk devices
pseudo-device raid 8 # RAIDframe disk driver
options RAID_AUTOCONFIG # auto-configuration of RAID components
# Options to enable various other RAIDframe RAID types.
# options RF_INCLUDE_EVENODD=1
# options RF_INCLUDE_RAID5_RS=1
# options RF_INCLUDE_PARITYLOGGING=1
# options RF_INCLUDE_CHAINDECLUSTER=1
# options RF_INCLUDE_INTERDECLUSTER=1
# options RF_INCLUDE_PARITY_DECLUSTERING=1
# options RF_INCLUDE_PARITY_DECLUSTERING_DS=1
pseudo-device rnd # /dev/random and in-kernel generator
#options RND_COM # use "com" randomness as well (BROKEN)
pseudo-device ksyms # /dev/ksyms (kernel symbols)
pseudo-device nsmb # experimental - SMB requester
# Veriexec
#
# a pseudo device needed for veriexec
#pseudo-device veriexec 1
#
# Uncomment the fingerprint methods below that are desired. Note that
# removing fingerprint methods will have almost no impact on the kernel
# code size.
#
#options VERIFIED_EXEC_FP_RMD160
#options VERIFIED_EXEC_FP_SHA256
#options VERIFIED_EXEC_FP_SHA384
#options VERIFIED_EXEC_FP_SHA512
#options VERIFIED_EXEC_FP_SHA1
#options VERIFIED_EXEC_FP_MD5
# Kernel root file system and dump configuration
config netbsd root on ? type ?