59 lines
1.8 KiB
Plaintext
59 lines
1.8 KiB
Plaintext
|
|
||
|
|
-------------------------
|
||
|
|
Installing the OSD System
|
||
|
|
-------------------------
|
||
|
|
|
||
|
|
1. Build kernel version 2.4 w/ SMP mode disabled and make sure the
|
||
|
|
directory /usr/src/linux points to this build.
|
||
|
|
2. Modify initiator.h and initiator.c (as per the README) to point to
|
||
|
|
your intended target.
|
||
|
|
3. Run 'make osd' to build all the OSD executables. In particular,
|
||
|
|
you need uosd, so.o, intel_iscsi.o and osdfs.o.
|
||
|
|
4. Run 'make all' to build the remaining executables.
|
||
|
|
5. Select a machine as the target and run "uosd -f" as root on this
|
||
|
|
machine. This will create files and directories in /tmp.
|
||
|
|
|
||
|
|
----------------------
|
||
|
|
Testing the OSD System
|
||
|
|
----------------------
|
||
|
|
|
||
|
|
6. Run utest to make sure the target is working OK.
|
||
|
|
7. Do an "insmod ./so.o" to install the Linux SCSI upper layer driver for OSD.
|
||
|
|
8. Do an "insmod ./intel_iscsi.o" to install the kernel mode iSCSI initiator.
|
||
|
|
9. Do an "insmod ./osdfs.o" to install the file system.
|
||
|
|
10. Make the OSD device with "mknod /dev/so0 b 232 0".
|
||
|
|
11. Do a "mount -t osdfs /dev/so0 /mnt" to mount the filesystem.
|
||
|
|
12. Go to /mnt and run "echo Hello, World! > foo" to create an object
|
||
|
|
on the OSD.
|
||
|
|
13. Do a "cat foo" to read the object. you should see "Hello, world!"
|
||
|
|
|
||
|
|
From here you should be able to use /mnt as you would any filesystem.
|
||
|
|
|
||
|
|
--------------------
|
||
|
|
2.4.18 Modifications
|
||
|
|
--------------------
|
||
|
|
|
||
|
|
include/scsi/scsi.h:143
|
||
|
|
#define TYPE_OSD 0x0e
|
||
|
|
|
||
|
|
drivers/scsi/scsi.h:92:
|
||
|
|
#define MAX_SCSI_DEVICE_CODE 15
|
||
|
|
|
||
|
|
drivers/scsi/scsi.h:354:
|
||
|
|
#define MAX_COMMAND_SIZE 256
|
||
|
|
|
||
|
|
drivers/scsi/scsi.c:145:
|
||
|
|
"OSD ",
|
||
|
|
|
||
|
|
drivers/scsi/scsi_dma.c:248:
|
||
|
|
SDpnt->type == TYPE_DISK || SDpnt->type == TYPE_MOD || SDpnt->type == TYPE_OSD) {
|
||
|
|
|
||
|
|
drivers/scsi/scsi_scan.c:644:
|
||
|
|
case TYPE_OSD:
|
||
|
|
|
||
|
|
----------
|
||
|
|
Hints/Tips
|
||
|
|
----------
|
||
|
|
|
||
|
|
-Field testing on some workstations resulted in compiling errors if highmem support in the kernel as enabled
|