2006-03-26 03:14:58 +04:00
|
|
|
/* $NetBSD: xirc.c,v 1.16 2006/03/25 23:23:26 thorpej Exp $ */
|
Split "xi" into a "xirc" frontend (similar to mhzc; it attaches two child
devices) and a "xi" backend.
My CE2 and CEM2 cards are now probed correctly. However, there are still
some problems with one model of the CE2, and the CEM2 doesn't seem to get
any modem interrupts.
While I'm at it, fix several bugs:
* The tuple scan for the MAC address was broken in multiple ways.
* xi_intr() did not deal well with a shared interrupt.
* We were setting the wrong page number to look at the receive status. (How
did this work???)
* Remove the xi_full_reset() from xi_reset(). Move the parts of
xi_full_reset() needed to undo the effect of xi_stop() into xi_init(). This
allows a stop/init pair to DTRT, and much quicker, as used by various
ioctl()s.
* Set the TRS register before reading the TSO register, as the Linux driver
does. While I'm at it, fix the name.
* Fix numerous problems with xi_set_address(). "Where do I begin?" There's a
chance that multicast works now, but I haven't tested it.
* Explicitly clear the MSR register, and also force SELECT_MII to 0 if we
didn't find any PHYs.
* Clean up some cruft that appears to be bogus.
Probably needs more work, but it's a start.
2004-08-08 09:56:08 +04:00
|
|
|
|
|
|
|
/*-
|
|
|
|
* Copyright (c) 1999, 2000, 2004 The NetBSD Foundation, Inc.
|
|
|
|
* All rights reserved.
|
|
|
|
*
|
|
|
|
* This code is derived from software contributed to The NetBSD Foundation
|
|
|
|
* by Jason R. Thorpe of the Numerical Aerospace Simulation Facility,
|
|
|
|
* NASA Ames Research Center and by Charles M. Hannum.
|
|
|
|
*
|
|
|
|
* Redistribution and use in source and binary forms, with or without
|
|
|
|
* modification, are permitted provided that the following conditions
|
|
|
|
* are met:
|
|
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer.
|
|
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
|
|
* documentation and/or other materials provided with the distribution.
|
|
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
|
|
* must display the following acknowledgement:
|
|
|
|
* This product includes software developed by the NetBSD
|
|
|
|
* Foundation, Inc. and its contributors.
|
|
|
|
* 4. Neither the name of The NetBSD Foundation nor the names of its
|
|
|
|
* contributors may be used to endorse or promote products derived
|
|
|
|
* from this software without specific prior written permission.
|
|
|
|
*
|
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
|
|
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
|
|
|
|
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
|
|
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
|
|
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <sys/cdefs.h>
|
2006-03-26 03:14:58 +04:00
|
|
|
__KERNEL_RCSID(0, "$NetBSD: xirc.c,v 1.16 2006/03/25 23:23:26 thorpej Exp $");
|
Split "xi" into a "xirc" frontend (similar to mhzc; it attaches two child
devices) and a "xi" backend.
My CE2 and CEM2 cards are now probed correctly. However, there are still
some problems with one model of the CE2, and the CEM2 doesn't seem to get
any modem interrupts.
While I'm at it, fix several bugs:
* The tuple scan for the MAC address was broken in multiple ways.
* xi_intr() did not deal well with a shared interrupt.
* We were setting the wrong page number to look at the receive status. (How
did this work???)
* Remove the xi_full_reset() from xi_reset(). Move the parts of
xi_full_reset() needed to undo the effect of xi_stop() into xi_init(). This
allows a stop/init pair to DTRT, and much quicker, as used by various
ioctl()s.
* Set the TRS register before reading the TSO register, as the Linux driver
does. While I'm at it, fix the name.
* Fix numerous problems with xi_set_address(). "Where do I begin?" There's a
chance that multicast works now, but I haven't tested it.
* Explicitly clear the MSR register, and also force SELECT_MII to 0 if we
didn't find any PHYs.
* Clean up some cruft that appears to be bogus.
Probably needs more work, but it's a start.
2004-08-08 09:56:08 +04:00
|
|
|
|
2005-02-27 03:26:58 +03:00
|
|
|
#include "opt_inet.h"
|
Split "xi" into a "xirc" frontend (similar to mhzc; it attaches two child
devices) and a "xi" backend.
My CE2 and CEM2 cards are now probed correctly. However, there are still
some problems with one model of the CE2, and the CEM2 doesn't seem to get
any modem interrupts.
While I'm at it, fix several bugs:
* The tuple scan for the MAC address was broken in multiple ways.
* xi_intr() did not deal well with a shared interrupt.
* We were setting the wrong page number to look at the receive status. (How
did this work???)
* Remove the xi_full_reset() from xi_reset(). Move the parts of
xi_full_reset() needed to undo the effect of xi_stop() into xi_init(). This
allows a stop/init pair to DTRT, and much quicker, as used by various
ioctl()s.
* Set the TRS register before reading the TSO register, as the Linux driver
does. While I'm at it, fix the name.
* Fix numerous problems with xi_set_address(). "Where do I begin?" There's a
chance that multicast works now, but I haven't tested it.
* Explicitly clear the MSR register, and also force SELECT_MII to 0 if we
didn't find any PHYs.
* Clean up some cruft that appears to be bogus.
Probably needs more work, but it's a start.
2004-08-08 09:56:08 +04:00
|
|
|
#include "opt_ns.h"
|
|
|
|
#include "bpfilter.h"
|
|
|
|
|
|
|
|
#include <sys/param.h>
|
|
|
|
#include <sys/systm.h>
|
|
|
|
#include <sys/mbuf.h>
|
|
|
|
#include <sys/socket.h>
|
|
|
|
#include <sys/ioctl.h>
|
|
|
|
#include <sys/errno.h>
|
|
|
|
#include <sys/syslog.h>
|
|
|
|
#include <sys/select.h>
|
|
|
|
#include <sys/tty.h>
|
|
|
|
#include <sys/device.h>
|
|
|
|
|
2005-02-27 03:26:58 +03:00
|
|
|
#include <net/if.h>
|
|
|
|
#include <net/if_dl.h>
|
Split "xi" into a "xirc" frontend (similar to mhzc; it attaches two child
devices) and a "xi" backend.
My CE2 and CEM2 cards are now probed correctly. However, there are still
some problems with one model of the CE2, and the CEM2 doesn't seem to get
any modem interrupts.
While I'm at it, fix several bugs:
* The tuple scan for the MAC address was broken in multiple ways.
* xi_intr() did not deal well with a shared interrupt.
* We were setting the wrong page number to look at the receive status. (How
did this work???)
* Remove the xi_full_reset() from xi_reset(). Move the parts of
xi_full_reset() needed to undo the effect of xi_stop() into xi_init(). This
allows a stop/init pair to DTRT, and much quicker, as used by various
ioctl()s.
* Set the TRS register before reading the TSO register, as the Linux driver
does. While I'm at it, fix the name.
* Fix numerous problems with xi_set_address(). "Where do I begin?" There's a
chance that multicast works now, but I haven't tested it.
* Explicitly clear the MSR register, and also force SELECT_MII to 0 if we
didn't find any PHYs.
* Clean up some cruft that appears to be bogus.
Probably needs more work, but it's a start.
2004-08-08 09:56:08 +04:00
|
|
|
#include <net/if_ether.h>
|
2005-02-27 03:26:58 +03:00
|
|
|
#include <net/if_media.h>
|
Split "xi" into a "xirc" frontend (similar to mhzc; it attaches two child
devices) and a "xi" backend.
My CE2 and CEM2 cards are now probed correctly. However, there are still
some problems with one model of the CE2, and the CEM2 doesn't seem to get
any modem interrupts.
While I'm at it, fix several bugs:
* The tuple scan for the MAC address was broken in multiple ways.
* xi_intr() did not deal well with a shared interrupt.
* We were setting the wrong page number to look at the receive status. (How
did this work???)
* Remove the xi_full_reset() from xi_reset(). Move the parts of
xi_full_reset() needed to undo the effect of xi_stop() into xi_init(). This
allows a stop/init pair to DTRT, and much quicker, as used by various
ioctl()s.
* Set the TRS register before reading the TSO register, as the Linux driver
does. While I'm at it, fix the name.
* Fix numerous problems with xi_set_address(). "Where do I begin?" There's a
chance that multicast works now, but I haven't tested it.
* Explicitly clear the MSR register, and also force SELECT_MII to 0 if we
didn't find any PHYs.
* Clean up some cruft that appears to be bogus.
Probably needs more work, but it's a start.
2004-08-08 09:56:08 +04:00
|
|
|
|
|
|
|
#ifdef INET
|
|
|
|
#include <netinet/in.h>
|
|
|
|
#include <netinet/in_systm.h>
|
|
|
|
#include <netinet/in_var.h>
|
|
|
|
#include <netinet/ip.h>
|
|
|
|
#include <netinet/if_inarp.h>
|
|
|
|
#endif
|
2005-02-27 03:26:58 +03:00
|
|
|
|
|
|
|
#ifdef NS
|
Split "xi" into a "xirc" frontend (similar to mhzc; it attaches two child
devices) and a "xi" backend.
My CE2 and CEM2 cards are now probed correctly. However, there are still
some problems with one model of the CE2, and the CEM2 doesn't seem to get
any modem interrupts.
While I'm at it, fix several bugs:
* The tuple scan for the MAC address was broken in multiple ways.
* xi_intr() did not deal well with a shared interrupt.
* We were setting the wrong page number to look at the receive status. (How
did this work???)
* Remove the xi_full_reset() from xi_reset(). Move the parts of
xi_full_reset() needed to undo the effect of xi_stop() into xi_init(). This
allows a stop/init pair to DTRT, and much quicker, as used by various
ioctl()s.
* Set the TRS register before reading the TSO register, as the Linux driver
does. While I'm at it, fix the name.
* Fix numerous problems with xi_set_address(). "Where do I begin?" There's a
chance that multicast works now, but I haven't tested it.
* Explicitly clear the MSR register, and also force SELECT_MII to 0 if we
didn't find any PHYs.
* Clean up some cruft that appears to be bogus.
Probably needs more work, but it's a start.
2004-08-08 09:56:08 +04:00
|
|
|
#include <netns/ns.h>
|
|
|
|
#include <netns/ns_if.h>
|
2005-02-27 03:26:58 +03:00
|
|
|
#endif
|
Split "xi" into a "xirc" frontend (similar to mhzc; it attaches two child
devices) and a "xi" backend.
My CE2 and CEM2 cards are now probed correctly. However, there are still
some problems with one model of the CE2, and the CEM2 doesn't seem to get
any modem interrupts.
While I'm at it, fix several bugs:
* The tuple scan for the MAC address was broken in multiple ways.
* xi_intr() did not deal well with a shared interrupt.
* We were setting the wrong page number to look at the receive status. (How
did this work???)
* Remove the xi_full_reset() from xi_reset(). Move the parts of
xi_full_reset() needed to undo the effect of xi_stop() into xi_init(). This
allows a stop/init pair to DTRT, and much quicker, as used by various
ioctl()s.
* Set the TRS register before reading the TSO register, as the Linux driver
does. While I'm at it, fix the name.
* Fix numerous problems with xi_set_address(). "Where do I begin?" There's a
chance that multicast works now, but I haven't tested it.
* Explicitly clear the MSR register, and also force SELECT_MII to 0 if we
didn't find any PHYs.
* Clean up some cruft that appears to be bogus.
Probably needs more work, but it's a start.
2004-08-08 09:56:08 +04:00
|
|
|
|
|
|
|
#if NBPFILTER > 0
|
|
|
|
#include <net/bpf.h>
|
|
|
|
#include <net/bpfdesc.h>
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#include <machine/intr.h>
|
|
|
|
#include <machine/bus.h>
|
|
|
|
|
|
|
|
#include <dev/pcmcia/pcmciareg.h>
|
|
|
|
#include <dev/pcmcia/pcmciavar.h>
|
|
|
|
#include <dev/pcmcia/pcmciadevs.h>
|
|
|
|
|
|
|
|
#include "xirc.h"
|
|
|
|
|
|
|
|
#if NCOM_XIRC > 0
|
|
|
|
#include <dev/ic/comreg.h>
|
|
|
|
#include <dev/ic/comvar.h>
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#if NXI_XIRC > 0
|
|
|
|
#include <dev/mii/mii.h>
|
|
|
|
#include <dev/mii/miivar.h>
|
|
|
|
|
|
|
|
#include <dev/pcmcia/if_xivar.h>
|
|
|
|
#endif
|
|
|
|
#include <dev/pcmcia/if_xireg.h>
|
|
|
|
|
|
|
|
struct xirc_softc {
|
|
|
|
struct device sc_dev; /* generic device glue */
|
|
|
|
|
|
|
|
struct pcmcia_function *sc_pf; /* our PCMCIA function */
|
|
|
|
void *sc_ih; /* interrupt handle */
|
|
|
|
|
|
|
|
u_int16_t sc_id;
|
2004-08-09 20:05:00 +04:00
|
|
|
u_int8_t sc_mako_intmask;
|
Split "xi" into a "xirc" frontend (similar to mhzc; it attaches two child
devices) and a "xi" backend.
My CE2 and CEM2 cards are now probed correctly. However, there are still
some problems with one model of the CE2, and the CEM2 doesn't seem to get
any modem interrupts.
While I'm at it, fix several bugs:
* The tuple scan for the MAC address was broken in multiple ways.
* xi_intr() did not deal well with a shared interrupt.
* We were setting the wrong page number to look at the receive status. (How
did this work???)
* Remove the xi_full_reset() from xi_reset(). Move the parts of
xi_full_reset() needed to undo the effect of xi_stop() into xi_init(). This
allows a stop/init pair to DTRT, and much quicker, as used by various
ioctl()s.
* Set the TRS register before reading the TSO register, as the Linux driver
does. While I'm at it, fix the name.
* Fix numerous problems with xi_set_address(). "Where do I begin?" There's a
chance that multicast works now, but I haven't tested it.
* Explicitly clear the MSR register, and also force SELECT_MII to 0 if we
didn't find any PHYs.
* Clean up some cruft that appears to be bogus.
Probably needs more work, but it's a start.
2004-08-08 09:56:08 +04:00
|
|
|
int sc_chipset;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Data for the Modem portion.
|
|
|
|
*/
|
|
|
|
struct device *sc_modem;
|
|
|
|
struct pcmcia_io_handle sc_modem_pcioh;
|
|
|
|
int sc_modem_io_window;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Data for the Ethernet portion.
|
|
|
|
*/
|
|
|
|
struct device *sc_ethernet;
|
|
|
|
struct pcmcia_io_handle sc_ethernet_pcioh;
|
|
|
|
int sc_ethernet_io_window;
|
|
|
|
|
|
|
|
int sc_flags;
|
|
|
|
#define XIRC_MODEM_MAPPED 0x01
|
|
|
|
#define XIRC_ETHERNET_MAPPED 0x02
|
|
|
|
#define XIRC_MODEM_ENABLED 0x04
|
|
|
|
#define XIRC_ETHERNET_ENABLED 0x08
|
|
|
|
#define XIRC_MODEM_ALLOCED 0x10
|
|
|
|
#define XIRC_ETHERNET_ALLOCED 0x20
|
|
|
|
};
|
|
|
|
|
2005-02-04 05:10:35 +03:00
|
|
|
int xirc_match(struct device *, struct cfdata *, void *);
|
|
|
|
void xirc_attach(struct device *, struct device *, void *);
|
|
|
|
int xirc_detach(struct device *, int);
|
|
|
|
int xirc_activate(struct device *, enum devact);
|
Split "xi" into a "xirc" frontend (similar to mhzc; it attaches two child
devices) and a "xi" backend.
My CE2 and CEM2 cards are now probed correctly. However, there are still
some problems with one model of the CE2, and the CEM2 doesn't seem to get
any modem interrupts.
While I'm at it, fix several bugs:
* The tuple scan for the MAC address was broken in multiple ways.
* xi_intr() did not deal well with a shared interrupt.
* We were setting the wrong page number to look at the receive status. (How
did this work???)
* Remove the xi_full_reset() from xi_reset(). Move the parts of
xi_full_reset() needed to undo the effect of xi_stop() into xi_init(). This
allows a stop/init pair to DTRT, and much quicker, as used by various
ioctl()s.
* Set the TRS register before reading the TSO register, as the Linux driver
does. While I'm at it, fix the name.
* Fix numerous problems with xi_set_address(). "Where do I begin?" There's a
chance that multicast works now, but I haven't tested it.
* Explicitly clear the MSR register, and also force SELECT_MII to 0 if we
didn't find any PHYs.
* Clean up some cruft that appears to be bogus.
Probably needs more work, but it's a start.
2004-08-08 09:56:08 +04:00
|
|
|
|
|
|
|
CFATTACH_DECL(xirc, sizeof(struct xirc_softc),
|
|
|
|
xirc_match, xirc_attach, xirc_detach, xirc_activate);
|
|
|
|
|
2005-02-04 05:10:35 +03:00
|
|
|
int xirc_print(void *, const char *);
|
Split "xi" into a "xirc" frontend (similar to mhzc; it attaches two child
devices) and a "xi" backend.
My CE2 and CEM2 cards are now probed correctly. However, there are still
some problems with one model of the CE2, and the CEM2 doesn't seem to get
any modem interrupts.
While I'm at it, fix several bugs:
* The tuple scan for the MAC address was broken in multiple ways.
* xi_intr() did not deal well with a shared interrupt.
* We were setting the wrong page number to look at the receive status. (How
did this work???)
* Remove the xi_full_reset() from xi_reset(). Move the parts of
xi_full_reset() needed to undo the effect of xi_stop() into xi_init(). This
allows a stop/init pair to DTRT, and much quicker, as used by various
ioctl()s.
* Set the TRS register before reading the TSO register, as the Linux driver
does. While I'm at it, fix the name.
* Fix numerous problems with xi_set_address(). "Where do I begin?" There's a
chance that multicast works now, but I haven't tested it.
* Explicitly clear the MSR register, and also force SELECT_MII to 0 if we
didn't find any PHYs.
* Clean up some cruft that appears to be bogus.
Probably needs more work, but it's a start.
2004-08-08 09:56:08 +04:00
|
|
|
|
2005-02-04 05:10:35 +03:00
|
|
|
int xirc_manfid_ciscallback(struct pcmcia_tuple *, void *);
|
Split "xi" into a "xirc" frontend (similar to mhzc; it attaches two child
devices) and a "xi" backend.
My CE2 and CEM2 cards are now probed correctly. However, there are still
some problems with one model of the CE2, and the CEM2 doesn't seem to get
any modem interrupts.
While I'm at it, fix several bugs:
* The tuple scan for the MAC address was broken in multiple ways.
* xi_intr() did not deal well with a shared interrupt.
* We were setting the wrong page number to look at the receive status. (How
did this work???)
* Remove the xi_full_reset() from xi_reset(). Move the parts of
xi_full_reset() needed to undo the effect of xi_stop() into xi_init(). This
allows a stop/init pair to DTRT, and much quicker, as used by various
ioctl()s.
* Set the TRS register before reading the TSO register, as the Linux driver
does. While I'm at it, fix the name.
* Fix numerous problems with xi_set_address(). "Where do I begin?" There's a
chance that multicast works now, but I haven't tested it.
* Explicitly clear the MSR register, and also force SELECT_MII to 0 if we
didn't find any PHYs.
* Clean up some cruft that appears to be bogus.
Probably needs more work, but it's a start.
2004-08-08 09:56:08 +04:00
|
|
|
struct pcmcia_config_entry *
|
2005-02-04 05:10:35 +03:00
|
|
|
xirc_mako_alloc(struct xirc_softc *);
|
Split "xi" into a "xirc" frontend (similar to mhzc; it attaches two child
devices) and a "xi" backend.
My CE2 and CEM2 cards are now probed correctly. However, there are still
some problems with one model of the CE2, and the CEM2 doesn't seem to get
any modem interrupts.
While I'm at it, fix several bugs:
* The tuple scan for the MAC address was broken in multiple ways.
* xi_intr() did not deal well with a shared interrupt.
* We were setting the wrong page number to look at the receive status. (How
did this work???)
* Remove the xi_full_reset() from xi_reset(). Move the parts of
xi_full_reset() needed to undo the effect of xi_stop() into xi_init(). This
allows a stop/init pair to DTRT, and much quicker, as used by various
ioctl()s.
* Set the TRS register before reading the TSO register, as the Linux driver
does. While I'm at it, fix the name.
* Fix numerous problems with xi_set_address(). "Where do I begin?" There's a
chance that multicast works now, but I haven't tested it.
* Explicitly clear the MSR register, and also force SELECT_MII to 0 if we
didn't find any PHYs.
* Clean up some cruft that appears to be bogus.
Probably needs more work, but it's a start.
2004-08-08 09:56:08 +04:00
|
|
|
struct pcmcia_config_entry *
|
2005-02-04 05:10:35 +03:00
|
|
|
xirc_dingo_alloc_modem(struct xirc_softc *);
|
Split "xi" into a "xirc" frontend (similar to mhzc; it attaches two child
devices) and a "xi" backend.
My CE2 and CEM2 cards are now probed correctly. However, there are still
some problems with one model of the CE2, and the CEM2 doesn't seem to get
any modem interrupts.
While I'm at it, fix several bugs:
* The tuple scan for the MAC address was broken in multiple ways.
* xi_intr() did not deal well with a shared interrupt.
* We were setting the wrong page number to look at the receive status. (How
did this work???)
* Remove the xi_full_reset() from xi_reset(). Move the parts of
xi_full_reset() needed to undo the effect of xi_stop() into xi_init(). This
allows a stop/init pair to DTRT, and much quicker, as used by various
ioctl()s.
* Set the TRS register before reading the TSO register, as the Linux driver
does. While I'm at it, fix the name.
* Fix numerous problems with xi_set_address(). "Where do I begin?" There's a
chance that multicast works now, but I haven't tested it.
* Explicitly clear the MSR register, and also force SELECT_MII to 0 if we
didn't find any PHYs.
* Clean up some cruft that appears to be bogus.
Probably needs more work, but it's a start.
2004-08-08 09:56:08 +04:00
|
|
|
struct pcmcia_config_entry *
|
2005-02-04 05:10:35 +03:00
|
|
|
xirc_dingo_alloc_ethernet(struct xirc_softc *);
|
Split "xi" into a "xirc" frontend (similar to mhzc; it attaches two child
devices) and a "xi" backend.
My CE2 and CEM2 cards are now probed correctly. However, there are still
some problems with one model of the CE2, and the CEM2 doesn't seem to get
any modem interrupts.
While I'm at it, fix several bugs:
* The tuple scan for the MAC address was broken in multiple ways.
* xi_intr() did not deal well with a shared interrupt.
* We were setting the wrong page number to look at the receive status. (How
did this work???)
* Remove the xi_full_reset() from xi_reset(). Move the parts of
xi_full_reset() needed to undo the effect of xi_stop() into xi_init(). This
allows a stop/init pair to DTRT, and much quicker, as used by various
ioctl()s.
* Set the TRS register before reading the TSO register, as the Linux driver
does. While I'm at it, fix the name.
* Fix numerous problems with xi_set_address(). "Where do I begin?" There's a
chance that multicast works now, but I haven't tested it.
* Explicitly clear the MSR register, and also force SELECT_MII to 0 if we
didn't find any PHYs.
* Clean up some cruft that appears to be bogus.
Probably needs more work, but it's a start.
2004-08-08 09:56:08 +04:00
|
|
|
|
2005-02-04 05:10:35 +03:00
|
|
|
int xirc_enable(struct xirc_softc *, int, int);
|
|
|
|
void xirc_disable(struct xirc_softc *, int, int);
|
Split "xi" into a "xirc" frontend (similar to mhzc; it attaches two child
devices) and a "xi" backend.
My CE2 and CEM2 cards are now probed correctly. However, there are still
some problems with one model of the CE2, and the CEM2 doesn't seem to get
any modem interrupts.
While I'm at it, fix several bugs:
* The tuple scan for the MAC address was broken in multiple ways.
* xi_intr() did not deal well with a shared interrupt.
* We were setting the wrong page number to look at the receive status. (How
did this work???)
* Remove the xi_full_reset() from xi_reset(). Move the parts of
xi_full_reset() needed to undo the effect of xi_stop() into xi_init(). This
allows a stop/init pair to DTRT, and much quicker, as used by various
ioctl()s.
* Set the TRS register before reading the TSO register, as the Linux driver
does. While I'm at it, fix the name.
* Fix numerous problems with xi_set_address(). "Where do I begin?" There's a
chance that multicast works now, but I haven't tested it.
* Explicitly clear the MSR register, and also force SELECT_MII to 0 if we
didn't find any PHYs.
* Clean up some cruft that appears to be bogus.
Probably needs more work, but it's a start.
2004-08-08 09:56:08 +04:00
|
|
|
|
2005-02-04 05:10:35 +03:00
|
|
|
int xirc_intr(void *);
|
Split "xi" into a "xirc" frontend (similar to mhzc; it attaches two child
devices) and a "xi" backend.
My CE2 and CEM2 cards are now probed correctly. However, there are still
some problems with one model of the CE2, and the CEM2 doesn't seem to get
any modem interrupts.
While I'm at it, fix several bugs:
* The tuple scan for the MAC address was broken in multiple ways.
* xi_intr() did not deal well with a shared interrupt.
* We were setting the wrong page number to look at the receive status. (How
did this work???)
* Remove the xi_full_reset() from xi_reset(). Move the parts of
xi_full_reset() needed to undo the effect of xi_stop() into xi_init(). This
allows a stop/init pair to DTRT, and much quicker, as used by various
ioctl()s.
* Set the TRS register before reading the TSO register, as the Linux driver
does. While I'm at it, fix the name.
* Fix numerous problems with xi_set_address(). "Where do I begin?" There's a
chance that multicast works now, but I haven't tested it.
* Explicitly clear the MSR register, and also force SELECT_MII to 0 if we
didn't find any PHYs.
* Clean up some cruft that appears to be bogus.
Probably needs more work, but it's a start.
2004-08-08 09:56:08 +04:00
|
|
|
|
|
|
|
int
|
|
|
|
xirc_match(parent, match, aux)
|
|
|
|
struct device *parent;
|
|
|
|
struct cfdata *match;
|
|
|
|
void *aux;
|
|
|
|
{
|
|
|
|
struct pcmcia_attach_args *pa = aux;
|
|
|
|
|
|
|
|
/* XXX Toshiba, Accton */
|
|
|
|
|
|
|
|
if (pa->manufacturer == PCMCIA_VENDOR_COMPAQ2 &&
|
|
|
|
pa->product == PCMCIA_PRODUCT_COMPAQ2_CPQ_10_100)
|
|
|
|
return (1);
|
|
|
|
|
|
|
|
if (pa->manufacturer == PCMCIA_VENDOR_INTEL &&
|
|
|
|
pa->product == PCMCIA_PRODUCT_INTEL_EEPRO100)
|
|
|
|
return (1);
|
|
|
|
|
|
|
|
if (pa->manufacturer == PCMCIA_VENDOR_XIRCOM &&
|
2004-08-09 20:05:00 +04:00
|
|
|
(pa->product & (XIMEDIA_ETHER << 8)) != 0)
|
Split "xi" into a "xirc" frontend (similar to mhzc; it attaches two child
devices) and a "xi" backend.
My CE2 and CEM2 cards are now probed correctly. However, there are still
some problems with one model of the CE2, and the CEM2 doesn't seem to get
any modem interrupts.
While I'm at it, fix several bugs:
* The tuple scan for the MAC address was broken in multiple ways.
* xi_intr() did not deal well with a shared interrupt.
* We were setting the wrong page number to look at the receive status. (How
did this work???)
* Remove the xi_full_reset() from xi_reset(). Move the parts of
xi_full_reset() needed to undo the effect of xi_stop() into xi_init(). This
allows a stop/init pair to DTRT, and much quicker, as used by various
ioctl()s.
* Set the TRS register before reading the TSO register, as the Linux driver
does. While I'm at it, fix the name.
* Fix numerous problems with xi_set_address(). "Where do I begin?" There's a
chance that multicast works now, but I haven't tested it.
* Explicitly clear the MSR register, and also force SELECT_MII to 0 if we
didn't find any PHYs.
* Clean up some cruft that appears to be bogus.
Probably needs more work, but it's a start.
2004-08-08 09:56:08 +04:00
|
|
|
return (2);
|
|
|
|
|
|
|
|
return (0);
|
|
|
|
}
|
|
|
|
|
|
|
|
void
|
|
|
|
xirc_attach(parent, self, aux)
|
|
|
|
struct device *parent, *self;
|
|
|
|
void *aux;
|
|
|
|
{
|
|
|
|
struct xirc_softc *sc = (void *)self;
|
|
|
|
struct pcmcia_attach_args *pa = aux;
|
|
|
|
struct pcmcia_config_entry *cfe;
|
|
|
|
int rv;
|
2004-08-10 19:29:56 +04:00
|
|
|
int error;
|
Split "xi" into a "xirc" frontend (similar to mhzc; it attaches two child
devices) and a "xi" backend.
My CE2 and CEM2 cards are now probed correctly. However, there are still
some problems with one model of the CE2, and the CEM2 doesn't seem to get
any modem interrupts.
While I'm at it, fix several bugs:
* The tuple scan for the MAC address was broken in multiple ways.
* xi_intr() did not deal well with a shared interrupt.
* We were setting the wrong page number to look at the receive status. (How
did this work???)
* Remove the xi_full_reset() from xi_reset(). Move the parts of
xi_full_reset() needed to undo the effect of xi_stop() into xi_init(). This
allows a stop/init pair to DTRT, and much quicker, as used by various
ioctl()s.
* Set the TRS register before reading the TSO register, as the Linux driver
does. While I'm at it, fix the name.
* Fix numerous problems with xi_set_address(). "Where do I begin?" There's a
chance that multicast works now, but I haven't tested it.
* Explicitly clear the MSR register, and also force SELECT_MII to 0 if we
didn't find any PHYs.
* Clean up some cruft that appears to be bogus.
Probably needs more work, but it's a start.
2004-08-08 09:56:08 +04:00
|
|
|
|
|
|
|
sc->sc_pf = pa->pf;
|
|
|
|
|
|
|
|
pcmcia_socket_enable(parent);
|
|
|
|
rv = pcmcia_scan_cis(parent, xirc_manfid_ciscallback, &sc->sc_id);
|
|
|
|
pcmcia_socket_disable(parent);
|
|
|
|
if (!rv) {
|
|
|
|
aprint_error("%s: failed to find ID\n", self->dv_xname);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
switch (sc->sc_id & 0x100f) {
|
|
|
|
case 0x0001: /* CE */
|
|
|
|
case 0x0002: /* CE2 */
|
|
|
|
sc->sc_chipset = XI_CHIPSET_SCIPPER;
|
|
|
|
break;
|
|
|
|
case 0x0003: /* CE3 */
|
|
|
|
sc->sc_chipset = XI_CHIPSET_MOHAWK;
|
|
|
|
break;
|
|
|
|
case 0x1001:
|
|
|
|
case 0x1002:
|
|
|
|
case 0x1003:
|
|
|
|
case 0x1004:
|
|
|
|
sc->sc_chipset = XI_CHIPSET_SCIPPER;
|
|
|
|
break;
|
|
|
|
case 0x1005:
|
|
|
|
sc->sc_chipset = XI_CHIPSET_MOHAWK;
|
|
|
|
break;
|
|
|
|
case 0x1006:
|
|
|
|
case 0x1007:
|
|
|
|
sc->sc_chipset = XI_CHIPSET_DINGO;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
aprint_error("%s: unknown ID %04x\n", self->dv_xname,
|
|
|
|
sc->sc_id);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
aprint_normal("%s: id=%04x\n", self->dv_xname, sc->sc_id);
|
|
|
|
|
|
|
|
if (sc->sc_id & (XIMEDIA_MODEM << 8)) {
|
|
|
|
if (sc->sc_chipset >= XI_CHIPSET_DINGO) {
|
|
|
|
cfe = xirc_dingo_alloc_modem(sc);
|
2004-08-09 22:11:01 +04:00
|
|
|
if (cfe && sc->sc_id & (XIMEDIA_ETHER << 8)) {
|
|
|
|
if (!xirc_dingo_alloc_ethernet(sc)) {
|
|
|
|
pcmcia_io_free(pa->pf,
|
|
|
|
&sc->sc_modem_pcioh);
|
|
|
|
cfe = 0;
|
|
|
|
}
|
Split "xi" into a "xirc" frontend (similar to mhzc; it attaches two child
devices) and a "xi" backend.
My CE2 and CEM2 cards are now probed correctly. However, there are still
some problems with one model of the CE2, and the CEM2 doesn't seem to get
any modem interrupts.
While I'm at it, fix several bugs:
* The tuple scan for the MAC address was broken in multiple ways.
* xi_intr() did not deal well with a shared interrupt.
* We were setting the wrong page number to look at the receive status. (How
did this work???)
* Remove the xi_full_reset() from xi_reset(). Move the parts of
xi_full_reset() needed to undo the effect of xi_stop() into xi_init(). This
allows a stop/init pair to DTRT, and much quicker, as used by various
ioctl()s.
* Set the TRS register before reading the TSO register, as the Linux driver
does. While I'm at it, fix the name.
* Fix numerous problems with xi_set_address(). "Where do I begin?" There's a
chance that multicast works now, but I haven't tested it.
* Explicitly clear the MSR register, and also force SELECT_MII to 0 if we
didn't find any PHYs.
* Clean up some cruft that appears to be bogus.
Probably needs more work, but it's a start.
2004-08-08 09:56:08 +04:00
|
|
|
}
|
2004-08-09 22:11:01 +04:00
|
|
|
} else
|
2004-08-09 20:05:00 +04:00
|
|
|
cfe = xirc_mako_alloc(sc);
|
2004-08-09 22:11:01 +04:00
|
|
|
} else
|
Split "xi" into a "xirc" frontend (similar to mhzc; it attaches two child
devices) and a "xi" backend.
My CE2 and CEM2 cards are now probed correctly. However, there are still
some problems with one model of the CE2, and the CEM2 doesn't seem to get
any modem interrupts.
While I'm at it, fix several bugs:
* The tuple scan for the MAC address was broken in multiple ways.
* xi_intr() did not deal well with a shared interrupt.
* We were setting the wrong page number to look at the receive status. (How
did this work???)
* Remove the xi_full_reset() from xi_reset(). Move the parts of
xi_full_reset() needed to undo the effect of xi_stop() into xi_init(). This
allows a stop/init pair to DTRT, and much quicker, as used by various
ioctl()s.
* Set the TRS register before reading the TSO register, as the Linux driver
does. While I'm at it, fix the name.
* Fix numerous problems with xi_set_address(). "Where do I begin?" There's a
chance that multicast works now, but I haven't tested it.
* Explicitly clear the MSR register, and also force SELECT_MII to 0 if we
didn't find any PHYs.
* Clean up some cruft that appears to be bogus.
Probably needs more work, but it's a start.
2004-08-08 09:56:08 +04:00
|
|
|
cfe = xirc_dingo_alloc_ethernet(sc);
|
2004-08-09 22:11:01 +04:00
|
|
|
if (!cfe) {
|
|
|
|
aprint_error("%s: failed to allocate I/O space\n",
|
|
|
|
self->dv_xname);
|
|
|
|
goto fail;
|
Split "xi" into a "xirc" frontend (similar to mhzc; it attaches two child
devices) and a "xi" backend.
My CE2 and CEM2 cards are now probed correctly. However, there are still
some problems with one model of the CE2, and the CEM2 doesn't seem to get
any modem interrupts.
While I'm at it, fix several bugs:
* The tuple scan for the MAC address was broken in multiple ways.
* xi_intr() did not deal well with a shared interrupt.
* We were setting the wrong page number to look at the receive status. (How
did this work???)
* Remove the xi_full_reset() from xi_reset(). Move the parts of
xi_full_reset() needed to undo the effect of xi_stop() into xi_init(). This
allows a stop/init pair to DTRT, and much quicker, as used by various
ioctl()s.
* Set the TRS register before reading the TSO register, as the Linux driver
does. While I'm at it, fix the name.
* Fix numerous problems with xi_set_address(). "Where do I begin?" There's a
chance that multicast works now, but I haven't tested it.
* Explicitly clear the MSR register, and also force SELECT_MII to 0 if we
didn't find any PHYs.
* Clean up some cruft that appears to be bogus.
Probably needs more work, but it's a start.
2004-08-08 09:56:08 +04:00
|
|
|
}
|
|
|
|
|
|
|
|
/* Enable the card. */
|
|
|
|
pcmcia_function_init(pa->pf, cfe);
|
2004-08-09 22:11:01 +04:00
|
|
|
|
2004-08-09 23:34:00 +04:00
|
|
|
if (sc->sc_id & (XIMEDIA_MODEM << 8)) {
|
|
|
|
if (pcmcia_io_map(sc->sc_pf, PCMCIA_WIDTH_IO8,
|
|
|
|
&sc->sc_modem_pcioh, &sc->sc_modem_io_window)) {
|
|
|
|
aprint_error("%s: unable to map I/O space\n",
|
|
|
|
self->dv_xname);
|
|
|
|
goto fail;
|
|
|
|
}
|
|
|
|
sc->sc_flags |= XIRC_MODEM_MAPPED;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (sc->sc_id & (XIMEDIA_ETHER << 8)) {
|
|
|
|
if (pcmcia_io_map(sc->sc_pf, PCMCIA_WIDTH_AUTO,
|
|
|
|
&sc->sc_ethernet_pcioh, &sc->sc_ethernet_io_window)) {
|
|
|
|
aprint_error("%s: unable to map I/O space\n",
|
|
|
|
self->dv_xname);
|
|
|
|
goto fail;
|
|
|
|
}
|
|
|
|
sc->sc_flags |= XIRC_ETHERNET_MAPPED;
|
|
|
|
}
|
|
|
|
|
2004-08-10 19:29:56 +04:00
|
|
|
error = xirc_enable(sc, XIRC_MODEM_ENABLED|XIRC_ETHERNET_ENABLED,
|
|
|
|
sc->sc_id & (XIMEDIA_MODEM|XIMEDIA_ETHER));
|
|
|
|
if (error)
|
Split "xi" into a "xirc" frontend (similar to mhzc; it attaches two child
devices) and a "xi" backend.
My CE2 and CEM2 cards are now probed correctly. However, there are still
some problems with one model of the CE2, and the CEM2 doesn't seem to get
any modem interrupts.
While I'm at it, fix several bugs:
* The tuple scan for the MAC address was broken in multiple ways.
* xi_intr() did not deal well with a shared interrupt.
* We were setting the wrong page number to look at the receive status. (How
did this work???)
* Remove the xi_full_reset() from xi_reset(). Move the parts of
xi_full_reset() needed to undo the effect of xi_stop() into xi_init(). This
allows a stop/init pair to DTRT, and much quicker, as used by various
ioctl()s.
* Set the TRS register before reading the TSO register, as the Linux driver
does. While I'm at it, fix the name.
* Fix numerous problems with xi_set_address(). "Where do I begin?" There's a
chance that multicast works now, but I haven't tested it.
* Explicitly clear the MSR register, and also force SELECT_MII to 0 if we
didn't find any PHYs.
* Clean up some cruft that appears to be bogus.
Probably needs more work, but it's a start.
2004-08-08 09:56:08 +04:00
|
|
|
goto fail;
|
|
|
|
|
2004-08-09 20:05:00 +04:00
|
|
|
sc->sc_mako_intmask = 0xee;
|
|
|
|
|
Split "xi" into a "xirc" frontend (similar to mhzc; it attaches two child
devices) and a "xi" backend.
My CE2 and CEM2 cards are now probed correctly. However, there are still
some problems with one model of the CE2, and the CEM2 doesn't seem to get
any modem interrupts.
While I'm at it, fix several bugs:
* The tuple scan for the MAC address was broken in multiple ways.
* xi_intr() did not deal well with a shared interrupt.
* We were setting the wrong page number to look at the receive status. (How
did this work???)
* Remove the xi_full_reset() from xi_reset(). Move the parts of
xi_full_reset() needed to undo the effect of xi_stop() into xi_init(). This
allows a stop/init pair to DTRT, and much quicker, as used by various
ioctl()s.
* Set the TRS register before reading the TSO register, as the Linux driver
does. While I'm at it, fix the name.
* Fix numerous problems with xi_set_address(). "Where do I begin?" There's a
chance that multicast works now, but I haven't tested it.
* Explicitly clear the MSR register, and also force SELECT_MII to 0 if we
didn't find any PHYs.
* Clean up some cruft that appears to be bogus.
Probably needs more work, but it's a start.
2004-08-08 09:56:08 +04:00
|
|
|
if (sc->sc_id & (XIMEDIA_MODEM << 8))
|
2005-05-30 08:28:49 +04:00
|
|
|
/*XXXUNCONST*/
|
|
|
|
sc->sc_modem = config_found(self, __UNCONST("com"), xirc_print);
|
Split "xi" into a "xirc" frontend (similar to mhzc; it attaches two child
devices) and a "xi" backend.
My CE2 and CEM2 cards are now probed correctly. However, there are still
some problems with one model of the CE2, and the CEM2 doesn't seem to get
any modem interrupts.
While I'm at it, fix several bugs:
* The tuple scan for the MAC address was broken in multiple ways.
* xi_intr() did not deal well with a shared interrupt.
* We were setting the wrong page number to look at the receive status. (How
did this work???)
* Remove the xi_full_reset() from xi_reset(). Move the parts of
xi_full_reset() needed to undo the effect of xi_stop() into xi_init(). This
allows a stop/init pair to DTRT, and much quicker, as used by various
ioctl()s.
* Set the TRS register before reading the TSO register, as the Linux driver
does. While I'm at it, fix the name.
* Fix numerous problems with xi_set_address(). "Where do I begin?" There's a
chance that multicast works now, but I haven't tested it.
* Explicitly clear the MSR register, and also force SELECT_MII to 0 if we
didn't find any PHYs.
* Clean up some cruft that appears to be bogus.
Probably needs more work, but it's a start.
2004-08-08 09:56:08 +04:00
|
|
|
if (sc->sc_id & (XIMEDIA_ETHER << 8))
|
2005-05-30 08:28:49 +04:00
|
|
|
/*XXXUNCONST*/
|
|
|
|
sc->sc_ethernet = config_found(self, __UNCONST("xi"),
|
|
|
|
xirc_print);
|
Split "xi" into a "xirc" frontend (similar to mhzc; it attaches two child
devices) and a "xi" backend.
My CE2 and CEM2 cards are now probed correctly. However, there are still
some problems with one model of the CE2, and the CEM2 doesn't seem to get
any modem interrupts.
While I'm at it, fix several bugs:
* The tuple scan for the MAC address was broken in multiple ways.
* xi_intr() did not deal well with a shared interrupt.
* We were setting the wrong page number to look at the receive status. (How
did this work???)
* Remove the xi_full_reset() from xi_reset(). Move the parts of
xi_full_reset() needed to undo the effect of xi_stop() into xi_init(). This
allows a stop/init pair to DTRT, and much quicker, as used by various
ioctl()s.
* Set the TRS register before reading the TSO register, as the Linux driver
does. While I'm at it, fix the name.
* Fix numerous problems with xi_set_address(). "Where do I begin?" There's a
chance that multicast works now, but I haven't tested it.
* Explicitly clear the MSR register, and also force SELECT_MII to 0 if we
didn't find any PHYs.
* Clean up some cruft that appears to be bogus.
Probably needs more work, but it's a start.
2004-08-08 09:56:08 +04:00
|
|
|
|
2004-08-09 22:11:01 +04:00
|
|
|
xirc_disable(sc, XIRC_MODEM_ENABLED|XIRC_ETHERNET_ENABLED,
|
|
|
|
sc->sc_id & (XIMEDIA_MODEM|XIMEDIA_ETHER));
|
Split "xi" into a "xirc" frontend (similar to mhzc; it attaches two child
devices) and a "xi" backend.
My CE2 and CEM2 cards are now probed correctly. However, there are still
some problems with one model of the CE2, and the CEM2 doesn't seem to get
any modem interrupts.
While I'm at it, fix several bugs:
* The tuple scan for the MAC address was broken in multiple ways.
* xi_intr() did not deal well with a shared interrupt.
* We were setting the wrong page number to look at the receive status. (How
did this work???)
* Remove the xi_full_reset() from xi_reset(). Move the parts of
xi_full_reset() needed to undo the effect of xi_stop() into xi_init(). This
allows a stop/init pair to DTRT, and much quicker, as used by various
ioctl()s.
* Set the TRS register before reading the TSO register, as the Linux driver
does. While I'm at it, fix the name.
* Fix numerous problems with xi_set_address(). "Where do I begin?" There's a
chance that multicast works now, but I haven't tested it.
* Explicitly clear the MSR register, and also force SELECT_MII to 0 if we
didn't find any PHYs.
* Clean up some cruft that appears to be bogus.
Probably needs more work, but it's a start.
2004-08-08 09:56:08 +04:00
|
|
|
return;
|
|
|
|
|
|
|
|
fail:
|
2004-08-09 23:34:00 +04:00
|
|
|
/* I/O spaces will be freed by detach. */
|
|
|
|
;
|
Split "xi" into a "xirc" frontend (similar to mhzc; it attaches two child
devices) and a "xi" backend.
My CE2 and CEM2 cards are now probed correctly. However, there are still
some problems with one model of the CE2, and the CEM2 doesn't seem to get
any modem interrupts.
While I'm at it, fix several bugs:
* The tuple scan for the MAC address was broken in multiple ways.
* xi_intr() did not deal well with a shared interrupt.
* We were setting the wrong page number to look at the receive status. (How
did this work???)
* Remove the xi_full_reset() from xi_reset(). Move the parts of
xi_full_reset() needed to undo the effect of xi_stop() into xi_init(). This
allows a stop/init pair to DTRT, and much quicker, as used by various
ioctl()s.
* Set the TRS register before reading the TSO register, as the Linux driver
does. While I'm at it, fix the name.
* Fix numerous problems with xi_set_address(). "Where do I begin?" There's a
chance that multicast works now, but I haven't tested it.
* Explicitly clear the MSR register, and also force SELECT_MII to 0 if we
didn't find any PHYs.
* Clean up some cruft that appears to be bogus.
Probably needs more work, but it's a start.
2004-08-08 09:56:08 +04:00
|
|
|
}
|
|
|
|
|
|
|
|
int
|
|
|
|
xirc_manfid_ciscallback(tuple, arg)
|
|
|
|
struct pcmcia_tuple *tuple;
|
|
|
|
void *arg;
|
|
|
|
{
|
|
|
|
u_int16_t *id = arg;
|
|
|
|
|
|
|
|
if (tuple->code != PCMCIA_CISTPL_MANFID)
|
|
|
|
return (0);
|
|
|
|
|
|
|
|
if (tuple->length < 5)
|
|
|
|
return (0);
|
|
|
|
|
|
|
|
*id = (pcmcia_tuple_read_1(tuple, 3) << 8) |
|
|
|
|
pcmcia_tuple_read_1(tuple, 4);
|
|
|
|
return (1);
|
|
|
|
}
|
|
|
|
|
|
|
|
struct pcmcia_config_entry *
|
2004-08-09 20:05:00 +04:00
|
|
|
xirc_mako_alloc(sc)
|
Split "xi" into a "xirc" frontend (similar to mhzc; it attaches two child
devices) and a "xi" backend.
My CE2 and CEM2 cards are now probed correctly. However, there are still
some problems with one model of the CE2, and the CEM2 doesn't seem to get
any modem interrupts.
While I'm at it, fix several bugs:
* The tuple scan for the MAC address was broken in multiple ways.
* xi_intr() did not deal well with a shared interrupt.
* We were setting the wrong page number to look at the receive status. (How
did this work???)
* Remove the xi_full_reset() from xi_reset(). Move the parts of
xi_full_reset() needed to undo the effect of xi_stop() into xi_init(). This
allows a stop/init pair to DTRT, and much quicker, as used by various
ioctl()s.
* Set the TRS register before reading the TSO register, as the Linux driver
does. While I'm at it, fix the name.
* Fix numerous problems with xi_set_address(). "Where do I begin?" There's a
chance that multicast works now, but I haven't tested it.
* Explicitly clear the MSR register, and also force SELECT_MII to 0 if we
didn't find any PHYs.
* Clean up some cruft that appears to be bogus.
Probably needs more work, but it's a start.
2004-08-08 09:56:08 +04:00
|
|
|
struct xirc_softc *sc;
|
|
|
|
{
|
|
|
|
struct pcmcia_config_entry *cfe;
|
|
|
|
|
|
|
|
SIMPLEQ_FOREACH(cfe, &sc->sc_pf->cfe_head, cfe_list) {
|
|
|
|
if (cfe->num_iospace != 1)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
if (pcmcia_io_alloc(sc->sc_pf, cfe->iospace[0].start,
|
|
|
|
cfe->iospace[0].length, cfe->iospace[0].length,
|
|
|
|
&sc->sc_modem_pcioh))
|
|
|
|
continue;
|
|
|
|
|
2004-08-10 02:24:37 +04:00
|
|
|
cfe->iospace[1].start = cfe->iospace[0].start+8;
|
|
|
|
cfe->iospace[1].length = 18;
|
|
|
|
if (pcmcia_io_alloc(sc->sc_pf, cfe->iospace[1].start,
|
|
|
|
cfe->iospace[1].length, 0x20,
|
|
|
|
&sc->sc_ethernet_pcioh)) {
|
|
|
|
cfe->iospace[1].start = cfe->iospace[0].start-24;
|
|
|
|
if (pcmcia_io_alloc(sc->sc_pf, cfe->iospace[1].start,
|
|
|
|
cfe->iospace[1].length, 0x20,
|
|
|
|
&sc->sc_ethernet_pcioh))
|
|
|
|
continue;
|
Split "xi" into a "xirc" frontend (similar to mhzc; it attaches two child
devices) and a "xi" backend.
My CE2 and CEM2 cards are now probed correctly. However, there are still
some problems with one model of the CE2, and the CEM2 doesn't seem to get
any modem interrupts.
While I'm at it, fix several bugs:
* The tuple scan for the MAC address was broken in multiple ways.
* xi_intr() did not deal well with a shared interrupt.
* We were setting the wrong page number to look at the receive status. (How
did this work???)
* Remove the xi_full_reset() from xi_reset(). Move the parts of
xi_full_reset() needed to undo the effect of xi_stop() into xi_init(). This
allows a stop/init pair to DTRT, and much quicker, as used by various
ioctl()s.
* Set the TRS register before reading the TSO register, as the Linux driver
does. While I'm at it, fix the name.
* Fix numerous problems with xi_set_address(). "Where do I begin?" There's a
chance that multicast works now, but I haven't tested it.
* Explicitly clear the MSR register, and also force SELECT_MII to 0 if we
didn't find any PHYs.
* Clean up some cruft that appears to be bogus.
Probably needs more work, but it's a start.
2004-08-08 09:56:08 +04:00
|
|
|
}
|
|
|
|
|
|
|
|
/* Found one! */
|
|
|
|
sc->sc_flags |= XIRC_MODEM_ALLOCED;
|
|
|
|
sc->sc_flags |= XIRC_ETHERNET_ALLOCED;
|
|
|
|
return (cfe);
|
|
|
|
}
|
|
|
|
|
|
|
|
return (0);
|
|
|
|
}
|
|
|
|
|
|
|
|
struct pcmcia_config_entry *
|
|
|
|
xirc_dingo_alloc_modem(sc)
|
|
|
|
struct xirc_softc *sc;
|
|
|
|
{
|
|
|
|
struct pcmcia_config_entry *cfe;
|
|
|
|
|
|
|
|
SIMPLEQ_FOREACH(cfe, &sc->sc_pf->cfe_head, cfe_list) {
|
|
|
|
if (cfe->num_iospace != 1)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
if (pcmcia_io_alloc(sc->sc_pf, cfe->iospace[0].start,
|
|
|
|
cfe->iospace[0].length, cfe->iospace[0].length,
|
|
|
|
&sc->sc_modem_pcioh))
|
|
|
|
continue;
|
|
|
|
|
|
|
|
/* Found one! */
|
|
|
|
sc->sc_flags |= XIRC_MODEM_ALLOCED;
|
|
|
|
return (cfe);
|
|
|
|
}
|
|
|
|
|
|
|
|
return (0);
|
|
|
|
}
|
|
|
|
|
|
|
|
struct pcmcia_config_entry *
|
|
|
|
xirc_dingo_alloc_ethernet(sc)
|
|
|
|
struct xirc_softc *sc;
|
|
|
|
{
|
|
|
|
struct pcmcia_config_entry *cfe;
|
|
|
|
bus_addr_t port;
|
|
|
|
|
|
|
|
for (port = 0x300; port < 0x400; port += XI_IOSIZE) {
|
|
|
|
if (pcmcia_io_alloc(sc->sc_pf, port,
|
|
|
|
XI_IOSIZE, XI_IOSIZE, &sc->sc_ethernet_pcioh))
|
|
|
|
continue;
|
|
|
|
|
|
|
|
/* Found one for the ethernet! */
|
|
|
|
sc->sc_flags |= XIRC_ETHERNET_ALLOCED;
|
|
|
|
cfe = SIMPLEQ_FIRST(&sc->sc_pf->cfe_head);
|
|
|
|
return (cfe);
|
|
|
|
}
|
|
|
|
|
|
|
|
return (0);
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
|
|
|
xirc_print(aux, pnp)
|
|
|
|
void *aux;
|
|
|
|
const char *pnp;
|
|
|
|
{
|
|
|
|
const char *name = aux;
|
|
|
|
|
|
|
|
if (pnp)
|
|
|
|
aprint_normal("%s at %s(*)", name, pnp);
|
|
|
|
|
|
|
|
return (UNCONF);
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
|
|
|
xirc_detach(self, flags)
|
|
|
|
struct device *self;
|
|
|
|
int flags;
|
|
|
|
{
|
|
|
|
struct xirc_softc *sc = (void *)self;
|
|
|
|
int rv;
|
|
|
|
|
|
|
|
if (sc->sc_ethernet != NULL) {
|
|
|
|
rv = config_detach(sc->sc_ethernet, flags);
|
|
|
|
if (rv != 0)
|
|
|
|
return (rv);
|
|
|
|
sc->sc_ethernet = NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (sc->sc_modem != NULL) {
|
|
|
|
rv = config_detach(sc->sc_modem, flags);
|
|
|
|
if (rv != 0)
|
|
|
|
return (rv);
|
|
|
|
sc->sc_modem = NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Unmap our i/o windows. */
|
|
|
|
if (sc->sc_flags & XIRC_ETHERNET_MAPPED)
|
|
|
|
pcmcia_io_unmap(sc->sc_pf, sc->sc_ethernet_io_window);
|
|
|
|
if (sc->sc_flags & XIRC_MODEM_MAPPED)
|
|
|
|
pcmcia_io_unmap(sc->sc_pf, sc->sc_modem_io_window);
|
|
|
|
|
|
|
|
/* Free our i/o spaces. */
|
|
|
|
if (sc->sc_flags & XIRC_ETHERNET_ALLOCED)
|
|
|
|
pcmcia_io_free(sc->sc_pf, &sc->sc_ethernet_pcioh);
|
|
|
|
if (sc->sc_flags & XIRC_MODEM_ALLOCED)
|
|
|
|
pcmcia_io_free(sc->sc_pf, &sc->sc_modem_pcioh);
|
|
|
|
sc->sc_flags = 0;
|
|
|
|
|
|
|
|
return (0);
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
|
|
|
xirc_activate(self, act)
|
|
|
|
struct device *self;
|
|
|
|
enum devact act;
|
|
|
|
{
|
|
|
|
struct xirc_softc *sc = (void *)self;
|
|
|
|
int s, rv = 0;
|
|
|
|
|
|
|
|
s = splhigh();
|
|
|
|
switch (act) {
|
|
|
|
case DVACT_ACTIVATE:
|
|
|
|
rv = EOPNOTSUPP;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case DVACT_DEACTIVATE:
|
|
|
|
if (sc->sc_ethernet != NULL) {
|
|
|
|
rv = config_deactivate(sc->sc_ethernet);
|
|
|
|
if (rv != 0)
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (sc->sc_modem != NULL) {
|
|
|
|
rv = config_deactivate(sc->sc_modem);
|
|
|
|
if (rv != 0)
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
out:
|
|
|
|
splx(s);
|
|
|
|
return (rv);
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
|
|
|
xirc_intr(arg)
|
|
|
|
void *arg;
|
|
|
|
{
|
|
|
|
struct xirc_softc *sc = arg;
|
|
|
|
int rval = 0;
|
|
|
|
|
|
|
|
#if NCOM_XIRC > 0
|
|
|
|
if (sc->sc_modem != NULL &&
|
|
|
|
(sc->sc_flags & XIRC_MODEM_ENABLED) != 0)
|
|
|
|
rval |= comintr(sc->sc_modem);
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#if NXI_XIRC > 0
|
|
|
|
if (sc->sc_ethernet != NULL &&
|
|
|
|
(sc->sc_flags & XIRC_ETHERNET_ENABLED) != 0)
|
|
|
|
rval |= xi_intr(sc->sc_ethernet);
|
|
|
|
#endif
|
|
|
|
|
|
|
|
return (rval);
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
2004-08-09 20:05:00 +04:00
|
|
|
xirc_enable(sc, flag, media)
|
Split "xi" into a "xirc" frontend (similar to mhzc; it attaches two child
devices) and a "xi" backend.
My CE2 and CEM2 cards are now probed correctly. However, there are still
some problems with one model of the CE2, and the CEM2 doesn't seem to get
any modem interrupts.
While I'm at it, fix several bugs:
* The tuple scan for the MAC address was broken in multiple ways.
* xi_intr() did not deal well with a shared interrupt.
* We were setting the wrong page number to look at the receive status. (How
did this work???)
* Remove the xi_full_reset() from xi_reset(). Move the parts of
xi_full_reset() needed to undo the effect of xi_stop() into xi_init(). This
allows a stop/init pair to DTRT, and much quicker, as used by various
ioctl()s.
* Set the TRS register before reading the TSO register, as the Linux driver
does. While I'm at it, fix the name.
* Fix numerous problems with xi_set_address(). "Where do I begin?" There's a
chance that multicast works now, but I haven't tested it.
* Explicitly clear the MSR register, and also force SELECT_MII to 0 if we
didn't find any PHYs.
* Clean up some cruft that appears to be bogus.
Probably needs more work, but it's a start.
2004-08-08 09:56:08 +04:00
|
|
|
struct xirc_softc *sc;
|
2004-08-09 20:05:00 +04:00
|
|
|
int flag, media;
|
Split "xi" into a "xirc" frontend (similar to mhzc; it attaches two child
devices) and a "xi" backend.
My CE2 and CEM2 cards are now probed correctly. However, there are still
some problems with one model of the CE2, and the CEM2 doesn't seem to get
any modem interrupts.
While I'm at it, fix several bugs:
* The tuple scan for the MAC address was broken in multiple ways.
* xi_intr() did not deal well with a shared interrupt.
* We were setting the wrong page number to look at the receive status. (How
did this work???)
* Remove the xi_full_reset() from xi_reset(). Move the parts of
xi_full_reset() needed to undo the effect of xi_stop() into xi_init(). This
allows a stop/init pair to DTRT, and much quicker, as used by various
ioctl()s.
* Set the TRS register before reading the TSO register, as the Linux driver
does. While I'm at it, fix the name.
* Fix numerous problems with xi_set_address(). "Where do I begin?" There's a
chance that multicast works now, but I haven't tested it.
* Explicitly clear the MSR register, and also force SELECT_MII to 0 if we
didn't find any PHYs.
* Clean up some cruft that appears to be bogus.
Probably needs more work, but it's a start.
2004-08-08 09:56:08 +04:00
|
|
|
{
|
2004-08-10 19:29:56 +04:00
|
|
|
int error;
|
Split "xi" into a "xirc" frontend (similar to mhzc; it attaches two child
devices) and a "xi" backend.
My CE2 and CEM2 cards are now probed correctly. However, there are still
some problems with one model of the CE2, and the CEM2 doesn't seem to get
any modem interrupts.
While I'm at it, fix several bugs:
* The tuple scan for the MAC address was broken in multiple ways.
* xi_intr() did not deal well with a shared interrupt.
* We were setting the wrong page number to look at the receive status. (How
did this work???)
* Remove the xi_full_reset() from xi_reset(). Move the parts of
xi_full_reset() needed to undo the effect of xi_stop() into xi_init(). This
allows a stop/init pair to DTRT, and much quicker, as used by various
ioctl()s.
* Set the TRS register before reading the TSO register, as the Linux driver
does. While I'm at it, fix the name.
* Fix numerous problems with xi_set_address(). "Where do I begin?" There's a
chance that multicast works now, but I haven't tested it.
* Explicitly clear the MSR register, and also force SELECT_MII to 0 if we
didn't find any PHYs.
* Clean up some cruft that appears to be bogus.
Probably needs more work, but it's a start.
2004-08-08 09:56:08 +04:00
|
|
|
|
2004-08-09 22:11:01 +04:00
|
|
|
if ((sc->sc_flags & flag) == flag) {
|
|
|
|
printf("%s: already enabled\n", sc->sc_dev.dv_xname);
|
|
|
|
return (0);
|
Split "xi" into a "xirc" frontend (similar to mhzc; it attaches two child
devices) and a "xi" backend.
My CE2 and CEM2 cards are now probed correctly. However, there are still
some problems with one model of the CE2, and the CEM2 doesn't seem to get
any modem interrupts.
While I'm at it, fix several bugs:
* The tuple scan for the MAC address was broken in multiple ways.
* xi_intr() did not deal well with a shared interrupt.
* We were setting the wrong page number to look at the receive status. (How
did this work???)
* Remove the xi_full_reset() from xi_reset(). Move the parts of
xi_full_reset() needed to undo the effect of xi_stop() into xi_init(). This
allows a stop/init pair to DTRT, and much quicker, as used by various
ioctl()s.
* Set the TRS register before reading the TSO register, as the Linux driver
does. While I'm at it, fix the name.
* Fix numerous problems with xi_set_address(). "Where do I begin?" There's a
chance that multicast works now, but I haven't tested it.
* Explicitly clear the MSR register, and also force SELECT_MII to 0 if we
didn't find any PHYs.
* Clean up some cruft that appears to be bogus.
Probably needs more work, but it's a start.
2004-08-08 09:56:08 +04:00
|
|
|
}
|
|
|
|
|
|
|
|
if ((sc->sc_flags & (XIRC_MODEM_ENABLED|XIRC_ETHERNET_ENABLED)) != 0) {
|
|
|
|
sc->sc_flags |= flag;
|
|
|
|
return (0);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Establish our interrupt handler.
|
|
|
|
*
|
|
|
|
* XXX Note, we establish this at IPL_NET. This is suboptimal
|
|
|
|
* XXX the Modem portion, but is necessary to make the Ethernet
|
|
|
|
* XXX portion have the correct interrupt level semantics.
|
|
|
|
*
|
|
|
|
* XXX Eventually we should use the `enabled' bits in the
|
|
|
|
* XXX flags word to determine which level we should be at.
|
|
|
|
*/
|
2004-08-10 19:29:56 +04:00
|
|
|
sc->sc_ih = pcmcia_intr_establish(sc->sc_pf, IPL_NET, xirc_intr, sc);
|
|
|
|
if (!sc->sc_ih)
|
2004-08-08 11:25:20 +04:00
|
|
|
return (EIO);
|
Split "xi" into a "xirc" frontend (similar to mhzc; it attaches two child
devices) and a "xi" backend.
My CE2 and CEM2 cards are now probed correctly. However, there are still
some problems with one model of the CE2, and the CEM2 doesn't seem to get
any modem interrupts.
While I'm at it, fix several bugs:
* The tuple scan for the MAC address was broken in multiple ways.
* xi_intr() did not deal well with a shared interrupt.
* We were setting the wrong page number to look at the receive status. (How
did this work???)
* Remove the xi_full_reset() from xi_reset(). Move the parts of
xi_full_reset() needed to undo the effect of xi_stop() into xi_init(). This
allows a stop/init pair to DTRT, and much quicker, as used by various
ioctl()s.
* Set the TRS register before reading the TSO register, as the Linux driver
does. While I'm at it, fix the name.
* Fix numerous problems with xi_set_address(). "Where do I begin?" There's a
chance that multicast works now, but I haven't tested it.
* Explicitly clear the MSR register, and also force SELECT_MII to 0 if we
didn't find any PHYs.
* Clean up some cruft that appears to be bogus.
Probably needs more work, but it's a start.
2004-08-08 09:56:08 +04:00
|
|
|
|
2004-08-10 19:29:56 +04:00
|
|
|
error = pcmcia_function_enable(sc->sc_pf);
|
|
|
|
if (error) {
|
Split "xi" into a "xirc" frontend (similar to mhzc; it attaches two child
devices) and a "xi" backend.
My CE2 and CEM2 cards are now probed correctly. However, there are still
some problems with one model of the CE2, and the CEM2 doesn't seem to get
any modem interrupts.
While I'm at it, fix several bugs:
* The tuple scan for the MAC address was broken in multiple ways.
* xi_intr() did not deal well with a shared interrupt.
* We were setting the wrong page number to look at the receive status. (How
did this work???)
* Remove the xi_full_reset() from xi_reset(). Move the parts of
xi_full_reset() needed to undo the effect of xi_stop() into xi_init(). This
allows a stop/init pair to DTRT, and much quicker, as used by various
ioctl()s.
* Set the TRS register before reading the TSO register, as the Linux driver
does. While I'm at it, fix the name.
* Fix numerous problems with xi_set_address(). "Where do I begin?" There's a
chance that multicast works now, but I haven't tested it.
* Explicitly clear the MSR register, and also force SELECT_MII to 0 if we
didn't find any PHYs.
* Clean up some cruft that appears to be bogus.
Probably needs more work, but it's a start.
2004-08-08 09:56:08 +04:00
|
|
|
pcmcia_intr_disestablish(sc->sc_pf, sc->sc_ih);
|
2004-08-10 20:04:16 +04:00
|
|
|
sc->sc_ih = 0;
|
2004-08-10 19:29:56 +04:00
|
|
|
return (error);
|
Split "xi" into a "xirc" frontend (similar to mhzc; it attaches two child
devices) and a "xi" backend.
My CE2 and CEM2 cards are now probed correctly. However, there are still
some problems with one model of the CE2, and the CEM2 doesn't seem to get
any modem interrupts.
While I'm at it, fix several bugs:
* The tuple scan for the MAC address was broken in multiple ways.
* xi_intr() did not deal well with a shared interrupt.
* We were setting the wrong page number to look at the receive status. (How
did this work???)
* Remove the xi_full_reset() from xi_reset(). Move the parts of
xi_full_reset() needed to undo the effect of xi_stop() into xi_init(). This
allows a stop/init pair to DTRT, and much quicker, as used by various
ioctl()s.
* Set the TRS register before reading the TSO register, as the Linux driver
does. While I'm at it, fix the name.
* Fix numerous problems with xi_set_address(). "Where do I begin?" There's a
chance that multicast works now, but I haven't tested it.
* Explicitly clear the MSR register, and also force SELECT_MII to 0 if we
didn't find any PHYs.
* Clean up some cruft that appears to be bogus.
Probably needs more work, but it's a start.
2004-08-08 09:56:08 +04:00
|
|
|
}
|
|
|
|
|
|
|
|
sc->sc_flags |= flag;
|
2004-08-09 20:05:00 +04:00
|
|
|
|
|
|
|
if (sc->sc_chipset < XI_CHIPSET_DINGO &&
|
|
|
|
sc->sc_id & (XIMEDIA_MODEM << 8)) {
|
|
|
|
sc->sc_mako_intmask |= media;
|
|
|
|
bus_space_write_1(sc->sc_ethernet_pcioh.iot,
|
|
|
|
sc->sc_ethernet_pcioh.ioh, 0x10, sc->sc_mako_intmask);
|
|
|
|
}
|
|
|
|
|
Split "xi" into a "xirc" frontend (similar to mhzc; it attaches two child
devices) and a "xi" backend.
My CE2 and CEM2 cards are now probed correctly. However, there are still
some problems with one model of the CE2, and the CEM2 doesn't seem to get
any modem interrupts.
While I'm at it, fix several bugs:
* The tuple scan for the MAC address was broken in multiple ways.
* xi_intr() did not deal well with a shared interrupt.
* We were setting the wrong page number to look at the receive status. (How
did this work???)
* Remove the xi_full_reset() from xi_reset(). Move the parts of
xi_full_reset() needed to undo the effect of xi_stop() into xi_init(). This
allows a stop/init pair to DTRT, and much quicker, as used by various
ioctl()s.
* Set the TRS register before reading the TSO register, as the Linux driver
does. While I'm at it, fix the name.
* Fix numerous problems with xi_set_address(). "Where do I begin?" There's a
chance that multicast works now, but I haven't tested it.
* Explicitly clear the MSR register, and also force SELECT_MII to 0 if we
didn't find any PHYs.
* Clean up some cruft that appears to be bogus.
Probably needs more work, but it's a start.
2004-08-08 09:56:08 +04:00
|
|
|
return (0);
|
|
|
|
}
|
|
|
|
|
|
|
|
void
|
2004-08-09 20:05:00 +04:00
|
|
|
xirc_disable(sc, flag, media)
|
Split "xi" into a "xirc" frontend (similar to mhzc; it attaches two child
devices) and a "xi" backend.
My CE2 and CEM2 cards are now probed correctly. However, there are still
some problems with one model of the CE2, and the CEM2 doesn't seem to get
any modem interrupts.
While I'm at it, fix several bugs:
* The tuple scan for the MAC address was broken in multiple ways.
* xi_intr() did not deal well with a shared interrupt.
* We were setting the wrong page number to look at the receive status. (How
did this work???)
* Remove the xi_full_reset() from xi_reset(). Move the parts of
xi_full_reset() needed to undo the effect of xi_stop() into xi_init(). This
allows a stop/init pair to DTRT, and much quicker, as used by various
ioctl()s.
* Set the TRS register before reading the TSO register, as the Linux driver
does. While I'm at it, fix the name.
* Fix numerous problems with xi_set_address(). "Where do I begin?" There's a
chance that multicast works now, but I haven't tested it.
* Explicitly clear the MSR register, and also force SELECT_MII to 0 if we
didn't find any PHYs.
* Clean up some cruft that appears to be bogus.
Probably needs more work, but it's a start.
2004-08-08 09:56:08 +04:00
|
|
|
struct xirc_softc *sc;
|
2004-08-09 20:05:00 +04:00
|
|
|
int flag, media;
|
Split "xi" into a "xirc" frontend (similar to mhzc; it attaches two child
devices) and a "xi" backend.
My CE2 and CEM2 cards are now probed correctly. However, there are still
some problems with one model of the CE2, and the CEM2 doesn't seem to get
any modem interrupts.
While I'm at it, fix several bugs:
* The tuple scan for the MAC address was broken in multiple ways.
* xi_intr() did not deal well with a shared interrupt.
* We were setting the wrong page number to look at the receive status. (How
did this work???)
* Remove the xi_full_reset() from xi_reset(). Move the parts of
xi_full_reset() needed to undo the effect of xi_stop() into xi_init(). This
allows a stop/init pair to DTRT, and much quicker, as used by various
ioctl()s.
* Set the TRS register before reading the TSO register, as the Linux driver
does. While I'm at it, fix the name.
* Fix numerous problems with xi_set_address(). "Where do I begin?" There's a
chance that multicast works now, but I haven't tested it.
* Explicitly clear the MSR register, and also force SELECT_MII to 0 if we
didn't find any PHYs.
* Clean up some cruft that appears to be bogus.
Probably needs more work, but it's a start.
2004-08-08 09:56:08 +04:00
|
|
|
{
|
|
|
|
|
2004-08-09 22:11:01 +04:00
|
|
|
if ((sc->sc_flags & flag) == 0) {
|
|
|
|
printf("%s: already disabled\n", sc->sc_dev.dv_xname);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
2004-08-09 20:05:00 +04:00
|
|
|
if (sc->sc_chipset < XI_CHIPSET_DINGO &&
|
|
|
|
sc->sc_id & (XIMEDIA_MODEM << 8)) {
|
|
|
|
sc->sc_mako_intmask &= ~media;
|
|
|
|
bus_space_write_1(sc->sc_ethernet_pcioh.iot,
|
|
|
|
sc->sc_ethernet_pcioh.ioh, 0x10, sc->sc_mako_intmask);
|
|
|
|
}
|
|
|
|
|
Split "xi" into a "xirc" frontend (similar to mhzc; it attaches two child
devices) and a "xi" backend.
My CE2 and CEM2 cards are now probed correctly. However, there are still
some problems with one model of the CE2, and the CEM2 doesn't seem to get
any modem interrupts.
While I'm at it, fix several bugs:
* The tuple scan for the MAC address was broken in multiple ways.
* xi_intr() did not deal well with a shared interrupt.
* We were setting the wrong page number to look at the receive status. (How
did this work???)
* Remove the xi_full_reset() from xi_reset(). Move the parts of
xi_full_reset() needed to undo the effect of xi_stop() into xi_init(). This
allows a stop/init pair to DTRT, and much quicker, as used by various
ioctl()s.
* Set the TRS register before reading the TSO register, as the Linux driver
does. While I'm at it, fix the name.
* Fix numerous problems with xi_set_address(). "Where do I begin?" There's a
chance that multicast works now, but I haven't tested it.
* Explicitly clear the MSR register, and also force SELECT_MII to 0 if we
didn't find any PHYs.
* Clean up some cruft that appears to be bogus.
Probably needs more work, but it's a start.
2004-08-08 09:56:08 +04:00
|
|
|
sc->sc_flags &= ~flag;
|
|
|
|
if ((sc->sc_flags & (XIRC_MODEM_ENABLED|XIRC_ETHERNET_ENABLED)) != 0)
|
|
|
|
return;
|
|
|
|
|
|
|
|
pcmcia_function_disable(sc->sc_pf);
|
2004-08-09 22:30:51 +04:00
|
|
|
pcmcia_intr_disestablish(sc->sc_pf, sc->sc_ih);
|
2004-08-10 19:29:56 +04:00
|
|
|
sc->sc_ih = 0;
|
Split "xi" into a "xirc" frontend (similar to mhzc; it attaches two child
devices) and a "xi" backend.
My CE2 and CEM2 cards are now probed correctly. However, there are still
some problems with one model of the CE2, and the CEM2 doesn't seem to get
any modem interrupts.
While I'm at it, fix several bugs:
* The tuple scan for the MAC address was broken in multiple ways.
* xi_intr() did not deal well with a shared interrupt.
* We were setting the wrong page number to look at the receive status. (How
did this work???)
* Remove the xi_full_reset() from xi_reset(). Move the parts of
xi_full_reset() needed to undo the effect of xi_stop() into xi_init(). This
allows a stop/init pair to DTRT, and much quicker, as used by various
ioctl()s.
* Set the TRS register before reading the TSO register, as the Linux driver
does. While I'm at it, fix the name.
* Fix numerous problems with xi_set_address(). "Where do I begin?" There's a
chance that multicast works now, but I haven't tested it.
* Explicitly clear the MSR register, and also force SELECT_MII to 0 if we
didn't find any PHYs.
* Clean up some cruft that appears to be bogus.
Probably needs more work, but it's a start.
2004-08-08 09:56:08 +04:00
|
|
|
}
|
|
|
|
|
|
|
|
/****** Here begins the com attachment code. ******/
|
|
|
|
|
|
|
|
#if NCOM_XIRC > 0
|
2005-02-04 05:10:35 +03:00
|
|
|
int com_xirc_match(struct device *, struct cfdata *, void *);
|
|
|
|
void com_xirc_attach(struct device *, struct device *, void *);
|
|
|
|
int com_xirc_detach(struct device *, int);
|
Split "xi" into a "xirc" frontend (similar to mhzc; it attaches two child
devices) and a "xi" backend.
My CE2 and CEM2 cards are now probed correctly. However, there are still
some problems with one model of the CE2, and the CEM2 doesn't seem to get
any modem interrupts.
While I'm at it, fix several bugs:
* The tuple scan for the MAC address was broken in multiple ways.
* xi_intr() did not deal well with a shared interrupt.
* We were setting the wrong page number to look at the receive status. (How
did this work???)
* Remove the xi_full_reset() from xi_reset(). Move the parts of
xi_full_reset() needed to undo the effect of xi_stop() into xi_init(). This
allows a stop/init pair to DTRT, and much quicker, as used by various
ioctl()s.
* Set the TRS register before reading the TSO register, as the Linux driver
does. While I'm at it, fix the name.
* Fix numerous problems with xi_set_address(). "Where do I begin?" There's a
chance that multicast works now, but I haven't tested it.
* Explicitly clear the MSR register, and also force SELECT_MII to 0 if we
didn't find any PHYs.
* Clean up some cruft that appears to be bogus.
Probably needs more work, but it's a start.
2004-08-08 09:56:08 +04:00
|
|
|
|
|
|
|
/* No xirc-specific goo in the softc; it's all in the parent. */
|
|
|
|
CFATTACH_DECL(com_xirc, sizeof(struct com_softc),
|
|
|
|
com_xirc_match, com_xirc_attach, com_detach, com_activate);
|
|
|
|
|
2005-02-04 05:10:35 +03:00
|
|
|
int com_xirc_enable(struct com_softc *);
|
|
|
|
void com_xirc_disable(struct com_softc *);
|
Split "xi" into a "xirc" frontend (similar to mhzc; it attaches two child
devices) and a "xi" backend.
My CE2 and CEM2 cards are now probed correctly. However, there are still
some problems with one model of the CE2, and the CEM2 doesn't seem to get
any modem interrupts.
While I'm at it, fix several bugs:
* The tuple scan for the MAC address was broken in multiple ways.
* xi_intr() did not deal well with a shared interrupt.
* We were setting the wrong page number to look at the receive status. (How
did this work???)
* Remove the xi_full_reset() from xi_reset(). Move the parts of
xi_full_reset() needed to undo the effect of xi_stop() into xi_init(). This
allows a stop/init pair to DTRT, and much quicker, as used by various
ioctl()s.
* Set the TRS register before reading the TSO register, as the Linux driver
does. While I'm at it, fix the name.
* Fix numerous problems with xi_set_address(). "Where do I begin?" There's a
chance that multicast works now, but I haven't tested it.
* Explicitly clear the MSR register, and also force SELECT_MII to 0 if we
didn't find any PHYs.
* Clean up some cruft that appears to be bogus.
Probably needs more work, but it's a start.
2004-08-08 09:56:08 +04:00
|
|
|
|
|
|
|
int
|
|
|
|
com_xirc_match(parent, match, aux)
|
|
|
|
struct device *parent;
|
|
|
|
struct cfdata *match;
|
|
|
|
void *aux;
|
|
|
|
{
|
|
|
|
extern struct cfdriver com_cd;
|
|
|
|
const char *name = aux;
|
|
|
|
|
|
|
|
if (strcmp(name, com_cd.cd_name) == 0)
|
|
|
|
return (1);
|
|
|
|
|
|
|
|
return (0);
|
|
|
|
}
|
|
|
|
|
|
|
|
void
|
|
|
|
com_xirc_attach(parent, self, aux)
|
|
|
|
struct device *parent, *self;
|
|
|
|
void *aux;
|
|
|
|
{
|
|
|
|
struct com_softc *sc = (void *)self;
|
|
|
|
struct xirc_softc *msc = (void *)parent;
|
|
|
|
|
|
|
|
aprint_normal("\n");
|
|
|
|
|
|
|
|
sc->sc_iot = msc->sc_modem_pcioh.iot;
|
|
|
|
sc->sc_ioh = msc->sc_modem_pcioh.ioh;
|
|
|
|
|
|
|
|
sc->enabled = 1;
|
|
|
|
|
|
|
|
sc->sc_iobase = -1;
|
|
|
|
sc->sc_frequency = COM_FREQ;
|
|
|
|
|
|
|
|
sc->enable = com_xirc_enable;
|
|
|
|
sc->disable = com_xirc_disable;
|
|
|
|
|
|
|
|
aprint_normal("%s", self->dv_xname);
|
|
|
|
|
|
|
|
com_attach_subr(sc);
|
|
|
|
|
|
|
|
sc->enabled = 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
|
|
|
com_xirc_enable(sc)
|
|
|
|
struct com_softc *sc;
|
|
|
|
{
|
2006-03-26 03:14:58 +04:00
|
|
|
struct xirc_softc *msc =
|
|
|
|
(struct xirc_softc *)device_parent(&sc->sc_dev);
|
Split "xi" into a "xirc" frontend (similar to mhzc; it attaches two child
devices) and a "xi" backend.
My CE2 and CEM2 cards are now probed correctly. However, there are still
some problems with one model of the CE2, and the CEM2 doesn't seem to get
any modem interrupts.
While I'm at it, fix several bugs:
* The tuple scan for the MAC address was broken in multiple ways.
* xi_intr() did not deal well with a shared interrupt.
* We were setting the wrong page number to look at the receive status. (How
did this work???)
* Remove the xi_full_reset() from xi_reset(). Move the parts of
xi_full_reset() needed to undo the effect of xi_stop() into xi_init(). This
allows a stop/init pair to DTRT, and much quicker, as used by various
ioctl()s.
* Set the TRS register before reading the TSO register, as the Linux driver
does. While I'm at it, fix the name.
* Fix numerous problems with xi_set_address(). "Where do I begin?" There's a
chance that multicast works now, but I haven't tested it.
* Explicitly clear the MSR register, and also force SELECT_MII to 0 if we
didn't find any PHYs.
* Clean up some cruft that appears to be bogus.
Probably needs more work, but it's a start.
2004-08-08 09:56:08 +04:00
|
|
|
|
2004-08-09 20:05:00 +04:00
|
|
|
return (xirc_enable(msc, XIRC_MODEM_ENABLED, XIMEDIA_MODEM));
|
Split "xi" into a "xirc" frontend (similar to mhzc; it attaches two child
devices) and a "xi" backend.
My CE2 and CEM2 cards are now probed correctly. However, there are still
some problems with one model of the CE2, and the CEM2 doesn't seem to get
any modem interrupts.
While I'm at it, fix several bugs:
* The tuple scan for the MAC address was broken in multiple ways.
* xi_intr() did not deal well with a shared interrupt.
* We were setting the wrong page number to look at the receive status. (How
did this work???)
* Remove the xi_full_reset() from xi_reset(). Move the parts of
xi_full_reset() needed to undo the effect of xi_stop() into xi_init(). This
allows a stop/init pair to DTRT, and much quicker, as used by various
ioctl()s.
* Set the TRS register before reading the TSO register, as the Linux driver
does. While I'm at it, fix the name.
* Fix numerous problems with xi_set_address(). "Where do I begin?" There's a
chance that multicast works now, but I haven't tested it.
* Explicitly clear the MSR register, and also force SELECT_MII to 0 if we
didn't find any PHYs.
* Clean up some cruft that appears to be bogus.
Probably needs more work, but it's a start.
2004-08-08 09:56:08 +04:00
|
|
|
}
|
|
|
|
|
|
|
|
void
|
|
|
|
com_xirc_disable(sc)
|
|
|
|
struct com_softc *sc;
|
|
|
|
{
|
2006-03-26 03:14:58 +04:00
|
|
|
struct xirc_softc *msc =
|
|
|
|
(struct xirc_softc *)device_parent(&sc->sc_dev);
|
Split "xi" into a "xirc" frontend (similar to mhzc; it attaches two child
devices) and a "xi" backend.
My CE2 and CEM2 cards are now probed correctly. However, there are still
some problems with one model of the CE2, and the CEM2 doesn't seem to get
any modem interrupts.
While I'm at it, fix several bugs:
* The tuple scan for the MAC address was broken in multiple ways.
* xi_intr() did not deal well with a shared interrupt.
* We were setting the wrong page number to look at the receive status. (How
did this work???)
* Remove the xi_full_reset() from xi_reset(). Move the parts of
xi_full_reset() needed to undo the effect of xi_stop() into xi_init(). This
allows a stop/init pair to DTRT, and much quicker, as used by various
ioctl()s.
* Set the TRS register before reading the TSO register, as the Linux driver
does. While I'm at it, fix the name.
* Fix numerous problems with xi_set_address(). "Where do I begin?" There's a
chance that multicast works now, but I haven't tested it.
* Explicitly clear the MSR register, and also force SELECT_MII to 0 if we
didn't find any PHYs.
* Clean up some cruft that appears to be bogus.
Probably needs more work, but it's a start.
2004-08-08 09:56:08 +04:00
|
|
|
|
2004-08-09 20:05:00 +04:00
|
|
|
xirc_disable(msc, XIRC_MODEM_ENABLED, XIMEDIA_MODEM);
|
Split "xi" into a "xirc" frontend (similar to mhzc; it attaches two child
devices) and a "xi" backend.
My CE2 and CEM2 cards are now probed correctly. However, there are still
some problems with one model of the CE2, and the CEM2 doesn't seem to get
any modem interrupts.
While I'm at it, fix several bugs:
* The tuple scan for the MAC address was broken in multiple ways.
* xi_intr() did not deal well with a shared interrupt.
* We were setting the wrong page number to look at the receive status. (How
did this work???)
* Remove the xi_full_reset() from xi_reset(). Move the parts of
xi_full_reset() needed to undo the effect of xi_stop() into xi_init(). This
allows a stop/init pair to DTRT, and much quicker, as used by various
ioctl()s.
* Set the TRS register before reading the TSO register, as the Linux driver
does. While I'm at it, fix the name.
* Fix numerous problems with xi_set_address(). "Where do I begin?" There's a
chance that multicast works now, but I haven't tested it.
* Explicitly clear the MSR register, and also force SELECT_MII to 0 if we
didn't find any PHYs.
* Clean up some cruft that appears to be bogus.
Probably needs more work, but it's a start.
2004-08-08 09:56:08 +04:00
|
|
|
}
|
|
|
|
|
|
|
|
#endif /* NCOM_XIRC > 0 */
|
|
|
|
|
|
|
|
/****** Here begins the xi attachment code. ******/
|
|
|
|
|
|
|
|
#if NXI_XIRC > 0
|
2005-02-04 05:10:35 +03:00
|
|
|
int xi_xirc_match(struct device *, struct cfdata *, void *);
|
|
|
|
void xi_xirc_attach(struct device *, struct device *, void *);
|
Split "xi" into a "xirc" frontend (similar to mhzc; it attaches two child
devices) and a "xi" backend.
My CE2 and CEM2 cards are now probed correctly. However, there are still
some problems with one model of the CE2, and the CEM2 doesn't seem to get
any modem interrupts.
While I'm at it, fix several bugs:
* The tuple scan for the MAC address was broken in multiple ways.
* xi_intr() did not deal well with a shared interrupt.
* We were setting the wrong page number to look at the receive status. (How
did this work???)
* Remove the xi_full_reset() from xi_reset(). Move the parts of
xi_full_reset() needed to undo the effect of xi_stop() into xi_init(). This
allows a stop/init pair to DTRT, and much quicker, as used by various
ioctl()s.
* Set the TRS register before reading the TSO register, as the Linux driver
does. While I'm at it, fix the name.
* Fix numerous problems with xi_set_address(). "Where do I begin?" There's a
chance that multicast works now, but I haven't tested it.
* Explicitly clear the MSR register, and also force SELECT_MII to 0 if we
didn't find any PHYs.
* Clean up some cruft that appears to be bogus.
Probably needs more work, but it's a start.
2004-08-08 09:56:08 +04:00
|
|
|
|
|
|
|
/* No xirc-specific goo in the softc; it's all in the parent. */
|
|
|
|
CFATTACH_DECL(xi_xirc, sizeof(struct xi_softc),
|
|
|
|
xi_xirc_match, xi_xirc_attach, xi_detach, xi_activate);
|
|
|
|
|
2005-02-04 05:10:35 +03:00
|
|
|
int xi_xirc_enable(struct xi_softc *);
|
|
|
|
void xi_xirc_disable(struct xi_softc *);
|
|
|
|
int xi_xirc_lan_nid_ciscallback(struct pcmcia_tuple *, void *);
|
Split "xi" into a "xirc" frontend (similar to mhzc; it attaches two child
devices) and a "xi" backend.
My CE2 and CEM2 cards are now probed correctly. However, there are still
some problems with one model of the CE2, and the CEM2 doesn't seem to get
any modem interrupts.
While I'm at it, fix several bugs:
* The tuple scan for the MAC address was broken in multiple ways.
* xi_intr() did not deal well with a shared interrupt.
* We were setting the wrong page number to look at the receive status. (How
did this work???)
* Remove the xi_full_reset() from xi_reset(). Move the parts of
xi_full_reset() needed to undo the effect of xi_stop() into xi_init(). This
allows a stop/init pair to DTRT, and much quicker, as used by various
ioctl()s.
* Set the TRS register before reading the TSO register, as the Linux driver
does. While I'm at it, fix the name.
* Fix numerous problems with xi_set_address(). "Where do I begin?" There's a
chance that multicast works now, but I haven't tested it.
* Explicitly clear the MSR register, and also force SELECT_MII to 0 if we
didn't find any PHYs.
* Clean up some cruft that appears to be bogus.
Probably needs more work, but it's a start.
2004-08-08 09:56:08 +04:00
|
|
|
|
|
|
|
int
|
|
|
|
xi_xirc_match(parent, match, aux)
|
|
|
|
struct device *parent;
|
|
|
|
struct cfdata *match;
|
|
|
|
void *aux;
|
|
|
|
{
|
|
|
|
extern struct cfdriver xi_cd;
|
|
|
|
const char *name = aux;
|
|
|
|
|
|
|
|
if (strcmp(name, xi_cd.cd_name) == 0)
|
|
|
|
return (1);
|
|
|
|
|
|
|
|
return (0);
|
|
|
|
}
|
|
|
|
|
|
|
|
void
|
|
|
|
xi_xirc_attach(parent, self, aux)
|
|
|
|
struct device *parent, *self;
|
|
|
|
void *aux;
|
|
|
|
{
|
|
|
|
struct xi_softc *sc = (void *)self;
|
|
|
|
struct xirc_softc *msc = (void *)parent;
|
|
|
|
u_int8_t myla[ETHER_ADDR_LEN];
|
|
|
|
|
|
|
|
aprint_normal("\n");
|
|
|
|
|
|
|
|
sc->sc_bst = msc->sc_ethernet_pcioh.iot;
|
|
|
|
sc->sc_bsh = msc->sc_ethernet_pcioh.ioh;
|
|
|
|
|
|
|
|
sc->sc_chipset = msc->sc_chipset;
|
|
|
|
|
|
|
|
sc->sc_enable = xi_xirc_enable;
|
|
|
|
sc->sc_disable = xi_xirc_disable;
|
|
|
|
|
2006-03-26 03:14:58 +04:00
|
|
|
if (!pcmcia_scan_cis(device_parent(&msc->sc_dev),
|
|
|
|
xi_xirc_lan_nid_ciscallback, myla)) {
|
Split "xi" into a "xirc" frontend (similar to mhzc; it attaches two child
devices) and a "xi" backend.
My CE2 and CEM2 cards are now probed correctly. However, there are still
some problems with one model of the CE2, and the CEM2 doesn't seem to get
any modem interrupts.
While I'm at it, fix several bugs:
* The tuple scan for the MAC address was broken in multiple ways.
* xi_intr() did not deal well with a shared interrupt.
* We were setting the wrong page number to look at the receive status. (How
did this work???)
* Remove the xi_full_reset() from xi_reset(). Move the parts of
xi_full_reset() needed to undo the effect of xi_stop() into xi_init(). This
allows a stop/init pair to DTRT, and much quicker, as used by various
ioctl()s.
* Set the TRS register before reading the TSO register, as the Linux driver
does. While I'm at it, fix the name.
* Fix numerous problems with xi_set_address(). "Where do I begin?" There's a
chance that multicast works now, but I haven't tested it.
* Explicitly clear the MSR register, and also force SELECT_MII to 0 if we
didn't find any PHYs.
* Clean up some cruft that appears to be bogus.
Probably needs more work, but it's a start.
2004-08-08 09:56:08 +04:00
|
|
|
aprint_error("%s: can't find MAC address\n", self->dv_xname);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Perform generic initialization. */
|
|
|
|
xi_attach(sc, myla);
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
|
|
|
xi_xirc_enable(sc)
|
|
|
|
struct xi_softc *sc;
|
|
|
|
{
|
2006-03-26 03:14:58 +04:00
|
|
|
struct xirc_softc *msc =
|
|
|
|
(struct xirc_softc *)device_parent(&sc->sc_dev);
|
Split "xi" into a "xirc" frontend (similar to mhzc; it attaches two child
devices) and a "xi" backend.
My CE2 and CEM2 cards are now probed correctly. However, there are still
some problems with one model of the CE2, and the CEM2 doesn't seem to get
any modem interrupts.
While I'm at it, fix several bugs:
* The tuple scan for the MAC address was broken in multiple ways.
* xi_intr() did not deal well with a shared interrupt.
* We were setting the wrong page number to look at the receive status. (How
did this work???)
* Remove the xi_full_reset() from xi_reset(). Move the parts of
xi_full_reset() needed to undo the effect of xi_stop() into xi_init(). This
allows a stop/init pair to DTRT, and much quicker, as used by various
ioctl()s.
* Set the TRS register before reading the TSO register, as the Linux driver
does. While I'm at it, fix the name.
* Fix numerous problems with xi_set_address(). "Where do I begin?" There's a
chance that multicast works now, but I haven't tested it.
* Explicitly clear the MSR register, and also force SELECT_MII to 0 if we
didn't find any PHYs.
* Clean up some cruft that appears to be bogus.
Probably needs more work, but it's a start.
2004-08-08 09:56:08 +04:00
|
|
|
|
2004-08-09 20:05:00 +04:00
|
|
|
return (xirc_enable(msc, XIRC_ETHERNET_ENABLED, XIMEDIA_ETHER));
|
Split "xi" into a "xirc" frontend (similar to mhzc; it attaches two child
devices) and a "xi" backend.
My CE2 and CEM2 cards are now probed correctly. However, there are still
some problems with one model of the CE2, and the CEM2 doesn't seem to get
any modem interrupts.
While I'm at it, fix several bugs:
* The tuple scan for the MAC address was broken in multiple ways.
* xi_intr() did not deal well with a shared interrupt.
* We were setting the wrong page number to look at the receive status. (How
did this work???)
* Remove the xi_full_reset() from xi_reset(). Move the parts of
xi_full_reset() needed to undo the effect of xi_stop() into xi_init(). This
allows a stop/init pair to DTRT, and much quicker, as used by various
ioctl()s.
* Set the TRS register before reading the TSO register, as the Linux driver
does. While I'm at it, fix the name.
* Fix numerous problems with xi_set_address(). "Where do I begin?" There's a
chance that multicast works now, but I haven't tested it.
* Explicitly clear the MSR register, and also force SELECT_MII to 0 if we
didn't find any PHYs.
* Clean up some cruft that appears to be bogus.
Probably needs more work, but it's a start.
2004-08-08 09:56:08 +04:00
|
|
|
}
|
|
|
|
|
|
|
|
void
|
|
|
|
xi_xirc_disable(sc)
|
|
|
|
struct xi_softc *sc;
|
|
|
|
{
|
2006-03-26 03:14:58 +04:00
|
|
|
struct xirc_softc *msc =
|
|
|
|
(struct xirc_softc *)device_parent(&sc->sc_dev);
|
Split "xi" into a "xirc" frontend (similar to mhzc; it attaches two child
devices) and a "xi" backend.
My CE2 and CEM2 cards are now probed correctly. However, there are still
some problems with one model of the CE2, and the CEM2 doesn't seem to get
any modem interrupts.
While I'm at it, fix several bugs:
* The tuple scan for the MAC address was broken in multiple ways.
* xi_intr() did not deal well with a shared interrupt.
* We were setting the wrong page number to look at the receive status. (How
did this work???)
* Remove the xi_full_reset() from xi_reset(). Move the parts of
xi_full_reset() needed to undo the effect of xi_stop() into xi_init(). This
allows a stop/init pair to DTRT, and much quicker, as used by various
ioctl()s.
* Set the TRS register before reading the TSO register, as the Linux driver
does. While I'm at it, fix the name.
* Fix numerous problems with xi_set_address(). "Where do I begin?" There's a
chance that multicast works now, but I haven't tested it.
* Explicitly clear the MSR register, and also force SELECT_MII to 0 if we
didn't find any PHYs.
* Clean up some cruft that appears to be bogus.
Probably needs more work, but it's a start.
2004-08-08 09:56:08 +04:00
|
|
|
|
2004-08-09 20:05:00 +04:00
|
|
|
xirc_disable(msc, XIRC_ETHERNET_ENABLED, XIMEDIA_ETHER);
|
Split "xi" into a "xirc" frontend (similar to mhzc; it attaches two child
devices) and a "xi" backend.
My CE2 and CEM2 cards are now probed correctly. However, there are still
some problems with one model of the CE2, and the CEM2 doesn't seem to get
any modem interrupts.
While I'm at it, fix several bugs:
* The tuple scan for the MAC address was broken in multiple ways.
* xi_intr() did not deal well with a shared interrupt.
* We were setting the wrong page number to look at the receive status. (How
did this work???)
* Remove the xi_full_reset() from xi_reset(). Move the parts of
xi_full_reset() needed to undo the effect of xi_stop() into xi_init(). This
allows a stop/init pair to DTRT, and much quicker, as used by various
ioctl()s.
* Set the TRS register before reading the TSO register, as the Linux driver
does. While I'm at it, fix the name.
* Fix numerous problems with xi_set_address(). "Where do I begin?" There's a
chance that multicast works now, but I haven't tested it.
* Explicitly clear the MSR register, and also force SELECT_MII to 0 if we
didn't find any PHYs.
* Clean up some cruft that appears to be bogus.
Probably needs more work, but it's a start.
2004-08-08 09:56:08 +04:00
|
|
|
}
|
|
|
|
|
|
|
|
int
|
|
|
|
xi_xirc_lan_nid_ciscallback(tuple, arg)
|
|
|
|
struct pcmcia_tuple *tuple;
|
|
|
|
void *arg;
|
|
|
|
{
|
|
|
|
u_int8_t *myla = arg;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
if (tuple->length < 2)
|
|
|
|
return (0);
|
|
|
|
|
|
|
|
switch (tuple->code) {
|
|
|
|
case PCMCIA_CISTPL_FUNCE:
|
|
|
|
switch (pcmcia_tuple_read_1(tuple, 0)) {
|
|
|
|
case PCMCIA_TPLFE_TYPE_LAN_NID:
|
|
|
|
if (pcmcia_tuple_read_1(tuple, 1) != ETHER_ADDR_LEN)
|
|
|
|
return (0);
|
|
|
|
for (i = 0; i < ETHER_ADDR_LEN; i++)
|
|
|
|
myla[i] = pcmcia_tuple_read_1(tuple, i + 2);
|
|
|
|
return (1);
|
|
|
|
|
|
|
|
case 0x02:
|
|
|
|
/*
|
|
|
|
* Not sure about this, I don't have a CE2
|
|
|
|
* that puts the ethernet addr here.
|
|
|
|
*/
|
|
|
|
if (pcmcia_tuple_read_1(tuple, 1) != 0x01 ||
|
|
|
|
pcmcia_tuple_read_1(tuple, 2) != ETHER_ADDR_LEN)
|
|
|
|
return (0);
|
|
|
|
for (i = 0; i < ETHER_ADDR_LEN; i++)
|
|
|
|
myla[i] = pcmcia_tuple_read_1(tuple, i + 3);
|
|
|
|
return (1);
|
|
|
|
}
|
|
|
|
|
|
|
|
case 0x89:
|
|
|
|
if (pcmcia_tuple_read_1(tuple, 0) != 0x04 ||
|
|
|
|
pcmcia_tuple_read_1(tuple, 1) != ETHER_ADDR_LEN)
|
|
|
|
return (0);
|
|
|
|
for (i = 0; i < ETHER_ADDR_LEN; i++)
|
|
|
|
myla[i] = pcmcia_tuple_read_1(tuple, i + 2);
|
|
|
|
return (1);
|
|
|
|
}
|
|
|
|
|
|
|
|
return (0);
|
|
|
|
}
|
|
|
|
|
|
|
|
#endif /* NXI_XIRC > 0 */
|