From Anon Ymous:
- Remove all longjmp(3) calls from signal handlers. Instead, we post
to an internal signal queue and check that periodically. All signal
related code is now in sig.c, except for the SIGCHLD handler which
remains in popen.c as it is intimately tied to routines there.
- Handle SIGPIPE in type1() regardless of mime support, or else the
handler in execute() will prevent our error code from being returned
resulting in 'sawcom' not being set on the first command as it should.
This only affected the initial behavior of the "next" command without
mime support.
- Add the 'T' flag to many commands in cmdtab.c that should not look
like the first command. E.g., start mail on a mailbox with multiple
messages, run "set foo", then "next", and watch the second message get
displayed rather than the first as is the case without the first "set"
command.
- Add file descriptor and file handle leak detection. Enabled by
DEBUG_FILE_LEAK. This will likely disappear in the future.
- Fix a long standing (since import in 1993) longjmp() bug in
edstop(): the jmpbuf was invalid when quit() is called at the end of
main.
- Fix a long standing bug (since import in 1993) in snarf() where it
didn't strip whitespace correctly if the line consisted only of
whitespace.
- Lint cleanup.
- New Feature: "Header" command. This allows miscellaneous header
fields to be added to the header, e.g., "X-Organization:" or
"Reply-To:" fields.
- New Feature: "page-also" variable. This allows the specification of
additional commands to page. It is more flexible than "crt".
- Document the "pager-off" variable: if set, it disables paging
entirely.
2009-04-10 17:08:24 +04:00
|
|
|
/* $NetBSD: cmdtab.c,v 1.21 2009/04/10 13:08:24 christos Exp $ */
|
1996-06-08 23:48:09 +04:00
|
|
|
|
1993-03-21 12:45:37 +03:00
|
|
|
/*
|
1994-06-29 09:09:04 +04:00
|
|
|
* Copyright (c) 1980, 1993
|
|
|
|
|
* The Regents of the University of California. All rights reserved.
|
1993-03-21 12:45:37 +03:00
|
|
|
*
|
|
|
|
|
* Redistribution and use in source and binary forms, with or without
|
|
|
|
|
* modification, are permitted provided that the following conditions
|
|
|
|
|
* are met:
|
|
|
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
|
|
|
* notice, this list of conditions and the following disclaimer.
|
|
|
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
|
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
|
|
|
* documentation and/or other materials provided with the distribution.
|
2003-08-07 15:13:06 +04:00
|
|
|
* 3. Neither the name of the University nor the names of its contributors
|
1993-03-21 12:45:37 +03:00
|
|
|
* may be used to endorse or promote products derived from this software
|
|
|
|
|
* without specific prior written permission.
|
|
|
|
|
*
|
|
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
|
|
|
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
|
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
|
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
|
|
|
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
|
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
|
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
|
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
|
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
|
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
|
|
|
* SUCH DAMAGE.
|
|
|
|
|
*/
|
|
|
|
|
|
1997-10-19 09:02:57 +04:00
|
|
|
#include <sys/cdefs.h>
|
1993-03-21 12:45:37 +03:00
|
|
|
#ifndef lint
|
1996-06-08 23:48:09 +04:00
|
|
|
#if 0
|
1996-12-28 10:10:57 +03:00
|
|
|
static char sccsid[] = "@(#)cmdtab.c 8.2 (Berkeley) 4/20/95";
|
1996-06-08 23:48:09 +04:00
|
|
|
#else
|
From Anon Ymous:
- Remove all longjmp(3) calls from signal handlers. Instead, we post
to an internal signal queue and check that periodically. All signal
related code is now in sig.c, except for the SIGCHLD handler which
remains in popen.c as it is intimately tied to routines there.
- Handle SIGPIPE in type1() regardless of mime support, or else the
handler in execute() will prevent our error code from being returned
resulting in 'sawcom' not being set on the first command as it should.
This only affected the initial behavior of the "next" command without
mime support.
- Add the 'T' flag to many commands in cmdtab.c that should not look
like the first command. E.g., start mail on a mailbox with multiple
messages, run "set foo", then "next", and watch the second message get
displayed rather than the first as is the case without the first "set"
command.
- Add file descriptor and file handle leak detection. Enabled by
DEBUG_FILE_LEAK. This will likely disappear in the future.
- Fix a long standing (since import in 1993) longjmp() bug in
edstop(): the jmpbuf was invalid when quit() is called at the end of
main.
- Fix a long standing bug (since import in 1993) in snarf() where it
didn't strip whitespace correctly if the line consisted only of
whitespace.
- Lint cleanup.
- New Feature: "Header" command. This allows miscellaneous header
fields to be added to the header, e.g., "X-Organization:" or
"Reply-To:" fields.
- New Feature: "page-also" variable. This allows the specification of
additional commands to page. It is more flexible than "crt".
- Document the "pager-off" variable: if set, it disables paging
entirely.
2009-04-10 17:08:24 +04:00
|
|
|
__RCSID("$NetBSD: cmdtab.c,v 1.21 2009/04/10 13:08:24 christos Exp $");
|
1996-06-08 23:48:09 +04:00
|
|
|
#endif
|
1993-03-21 12:45:37 +03:00
|
|
|
#endif /* not lint */
|
|
|
|
|
|
|
|
|
|
#include "def.h"
|
1994-06-29 09:09:04 +04:00
|
|
|
#include "extern.h"
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
#include "thread.h"
|
1993-03-21 12:45:37 +03:00
|
|
|
|
2006-10-22 01:37:20 +04:00
|
|
|
#ifdef USE_EDITLINE
|
Jumbo mail patch from our anonymous user:
1) Use editline [optional]:
Most of this code was borrowed from src/usr.bin/ftp. It does the
appropriate editing, history, and completion for all mail commands
(from cmdtab[]) and also does editing on header strings ('~h' inside
the mail editor).
2) '-B' flag:
This will suppress the "To:" line passed to sendmail. In most
configurations it will lead to sendmail adding "To: undisclosed
recipients;". Currently, AFAIK mail requires at least one exposed
recipient address.
3) Comments in rcfile:
Currently, comments in .mailrc are only supported if the first
(non-white) character on a line is '#' followed by white space,
i.e., '#' is a 'nop' command. This (trivial) patch allows the more
normal/expected use of '#' as a comment character. It does not
respect quoting, so that might be an objection which I should fix.
4) Sendmail option editing:
This adds the sendmail option string to the strings editable by the
'~h' command within the mail editor. Currently, you can only set
this string from the command-line, which is particularly annoying
when replying to mail.
5) Reply from:
When replying to a message, grab the "To:" address from the message
and, if there is only one such address and it does not match a list of
allowed addresses (set in the "ReplyFrom" variable), pass it to
sendmail as the "From:" address for the reply (with the '-f' option).
I often make aliases for myself so that my primary address is not
given out; if the alias gets out, I know who to blame. Unfortunately,
a reply to such a message would normally use the primary address
without this patch. A warning is displayed when this is going to
happen so that it can be modified with '~h'.
6) CC and BCC lists:
Allow '-c' and '-b' to accept white-space or ',' delimited lists.
Currently, a white-space delimited list of addresses work, but a
list of aliases will not get expanded. For example, currently:
mail -c "foo bar" christos
will fail to send mail to 'foo' and 'bar' if these are mail aliases
(in ~/.mailrc); sendmail aliases (in /etc/aliases) do work.
7) pipe command:
This pipes the current message into a shell command. I use this for
quick decoding of uuencoded mail, but I can imagine it might be
useful for decrypting encrypted mail, too.
8) show command:
This command takes a list of variables and shows their values. It
is probably stupid as the 'set' command without any argument
displays all variable values. Of course, if there are a lot of
variables you have to sift through the list for the one(s) you want.
2006-09-18 23:46:21 +04:00
|
|
|
# define CMP(x) #x,
|
|
|
|
|
# define CMP0 0,
|
|
|
|
|
#else
|
|
|
|
|
# define CMP(x)
|
|
|
|
|
# define CMP0
|
|
|
|
|
#endif
|
|
|
|
|
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
#define A (C_PIPE_SHELL | C_PIPE_PAGER)
|
2006-12-06 19:26:24 +03:00
|
|
|
#define C (C_PIPE_SHELL | C_PIPE_CRT)
|
2006-12-15 23:26:03 +03:00
|
|
|
#define S (C_PIPE_SHELL)
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
|
1993-03-21 12:45:37 +03:00
|
|
|
/*
|
|
|
|
|
* Mail -- a mail program
|
|
|
|
|
*
|
|
|
|
|
* Define all of the command names and bindings.
|
|
|
|
|
*/
|
2006-12-15 23:26:03 +03:00
|
|
|
/* R - in left comment means recursive */
|
1996-02-20 00:54:32 +03:00
|
|
|
const struct cmd cmdtab[] = {
|
2006-12-15 23:26:03 +03:00
|
|
|
{ "next", next, C, CMP(n) NDMLIST, 0, MMNDEL },
|
From Anon Ymous:
- Remove all longjmp(3) calls from signal handlers. Instead, we post
to an internal signal queue and check that periodically. All signal
related code is now in sig.c, except for the SIGCHLD handler which
remains in popen.c as it is intimately tied to routines there.
- Handle SIGPIPE in type1() regardless of mime support, or else the
handler in execute() will prevent our error code from being returned
resulting in 'sawcom' not being set on the first command as it should.
This only affected the initial behavior of the "next" command without
mime support.
- Add the 'T' flag to many commands in cmdtab.c that should not look
like the first command. E.g., start mail on a mailbox with multiple
messages, run "set foo", then "next", and watch the second message get
displayed rather than the first as is the case without the first "set"
command.
- Add file descriptor and file handle leak detection. Enabled by
DEBUG_FILE_LEAK. This will likely disappear in the future.
- Fix a long standing (since import in 1993) longjmp() bug in
edstop(): the jmpbuf was invalid when quit() is called at the end of
main.
- Fix a long standing bug (since import in 1993) in snarf() where it
didn't strip whitespace correctly if the line consisted only of
whitespace.
- Lint cleanup.
- New Feature: "Header" command. This allows miscellaneous header
fields to be added to the header, e.g., "X-Organization:" or
"Reply-To:" fields.
- New Feature: "page-also" variable. This allows the specification of
additional commands to page. It is more flexible than "crt".
- Document the "pager-off" variable: if set, it disables paging
entirely.
2009-04-10 17:08:24 +04:00
|
|
|
{ "alias", group, S, CMP(A) T|M|RAWLIST, 0, 1000 },
|
2006-12-06 19:26:24 +03:00
|
|
|
/* R */ { "print", type, C, CMP(n) MSGLIST, 0, MMNDEL },
|
|
|
|
|
/* R */ { "Print", Type, C, CMP(n) MSGLIST, 0, MMNDEL },
|
|
|
|
|
/* R */ { "type", type, C, CMP(n) MSGLIST, 0, MMNDEL },
|
|
|
|
|
/* R */ { "Type", Type, C, CMP(n) MSGLIST, 0, MMNDEL },
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
{ "visual", visual, 0, CMP(n) I|MSGLIST, 0, MMNORM },
|
2006-12-15 23:26:03 +03:00
|
|
|
/* R */ { "top", top, S, CMP(n) MSGLIST, 0, MMNDEL },
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
/* R */ { "touch", stouch, 0, CMP(n) W|MSGLIST, 0, MMNDEL },
|
|
|
|
|
/* R */ { "preserve", preserve, 0, CMP(n) W|MSGLIST, 0, MMNDEL },
|
|
|
|
|
/* R */ { "delete", delete, 0, CMP(n) W|P|MSGLIST, 0, MMNDEL },
|
2006-12-15 23:26:03 +03:00
|
|
|
/* R */ { "dp", deltype, C, CMP(n) W|MSGLIST, 0, MMNDEL },
|
|
|
|
|
/* R */ { "dt", deltype, C, CMP(n) W|MSGLIST, 0, MMNDEL },
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
/* R */ { "undelete", undeletecmd, 0, CMP(n) P|MSGLIST, MDELETED, MMNDEL },
|
From Anon Ymous:
- Remove all longjmp(3) calls from signal handlers. Instead, we post
to an internal signal queue and check that periodically. All signal
related code is now in sig.c, except for the SIGCHLD handler which
remains in popen.c as it is intimately tied to routines there.
- Handle SIGPIPE in type1() regardless of mime support, or else the
handler in execute() will prevent our error code from being returned
resulting in 'sawcom' not being set on the first command as it should.
This only affected the initial behavior of the "next" command without
mime support.
- Add the 'T' flag to many commands in cmdtab.c that should not look
like the first command. E.g., start mail on a mailbox with multiple
messages, run "set foo", then "next", and watch the second message get
displayed rather than the first as is the case without the first "set"
command.
- Add file descriptor and file handle leak detection. Enabled by
DEBUG_FILE_LEAK. This will likely disappear in the future.
- Fix a long standing (since import in 1993) longjmp() bug in
edstop(): the jmpbuf was invalid when quit() is called at the end of
main.
- Fix a long standing bug (since import in 1993) in snarf() where it
didn't strip whitespace correctly if the line consisted only of
whitespace.
- Lint cleanup.
- New Feature: "Header" command. This allows miscellaneous header
fields to be added to the header, e.g., "X-Organization:" or
"Reply-To:" fields.
- New Feature: "page-also" variable. This allows the specification of
additional commands to page. It is more flexible than "crt".
- Document the "pager-off" variable: if set, it disables paging
entirely.
2009-04-10 17:08:24 +04:00
|
|
|
{ "unset", unset, 0, CMP(S) T|M|RAWLIST, 1, 1000 },
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
{ "mail", sendmail, 0, CMP(A) R|M|I|STRLIST, 0, 0 },
|
|
|
|
|
/* R */ { "mbox", mboxit, 0, CMP(n) W|MSGLIST, 0, MMNDEL },
|
|
|
|
|
/* R */ { "more", type, A, CMP(n) MSGLIST, 0, MMNDEL },
|
|
|
|
|
/* R */ { "More", Type, A, CMP(n) MSGLIST, 0, MMNDEL },
|
|
|
|
|
/* R */ { "page", type, A, CMP(n) MSGLIST, 0, MMNDEL },
|
|
|
|
|
/* R */ { "Page", Type, A, CMP(n) MSGLIST, 0, MMNDEL },
|
2006-10-22 01:37:20 +04:00
|
|
|
#ifdef MIME_SUPPORT
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
/* R */ { "view", view, A, CMP(n) MSGLIST, 0, MMNDEL },
|
|
|
|
|
/* R */ { "View", View, A, CMP(n) MSGLIST, 0, MMNDEL },
|
2006-10-22 01:37:20 +04:00
|
|
|
#endif
|
From Anon Ymous:
- Remove all longjmp(3) calls from signal handlers. Instead, we post
to an internal signal queue and check that periodically. All signal
related code is now in sig.c, except for the SIGCHLD handler which
remains in popen.c as it is intimately tied to routines there.
- Handle SIGPIPE in type1() regardless of mime support, or else the
handler in execute() will prevent our error code from being returned
resulting in 'sawcom' not being set on the first command as it should.
This only affected the initial behavior of the "next" command without
mime support.
- Add the 'T' flag to many commands in cmdtab.c that should not look
like the first command. E.g., start mail on a mailbox with multiple
messages, run "set foo", then "next", and watch the second message get
displayed rather than the first as is the case without the first "set"
command.
- Add file descriptor and file handle leak detection. Enabled by
DEBUG_FILE_LEAK. This will likely disappear in the future.
- Fix a long standing (since import in 1993) longjmp() bug in
edstop(): the jmpbuf was invalid when quit() is called at the end of
main.
- Fix a long standing bug (since import in 1993) in snarf() where it
didn't strip whitespace correctly if the line consisted only of
whitespace.
- Lint cleanup.
- New Feature: "Header" command. This allows miscellaneous header
fields to be added to the header, e.g., "X-Organization:" or
"Reply-To:" fields.
- New Feature: "page-also" variable. This allows the specification of
additional commands to page. It is more flexible than "crt".
- Document the "pager-off" variable: if set, it disables paging
entirely.
2009-04-10 17:08:24 +04:00
|
|
|
{ "unalias", unalias, 0, CMP(A) T|M|RAWLIST, 1, 1000 },
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
/* R */ { "unread", unread, 0, CMP(n) MSGLIST, 0, MMNDEL },
|
From Anon Ymous:
- Remove all longjmp(3) calls from signal handlers. Instead, we post
to an internal signal queue and check that periodically. All signal
related code is now in sig.c, except for the SIGCHLD handler which
remains in popen.c as it is intimately tied to routines there.
- Handle SIGPIPE in type1() regardless of mime support, or else the
handler in execute() will prevent our error code from being returned
resulting in 'sawcom' not being set on the first command as it should.
This only affected the initial behavior of the "next" command without
mime support.
- Add the 'T' flag to many commands in cmdtab.c that should not look
like the first command. E.g., start mail on a mailbox with multiple
messages, run "set foo", then "next", and watch the second message get
displayed rather than the first as is the case without the first "set"
command.
- Add file descriptor and file handle leak detection. Enabled by
DEBUG_FILE_LEAK. This will likely disappear in the future.
- Fix a long standing (since import in 1993) longjmp() bug in
edstop(): the jmpbuf was invalid when quit() is called at the end of
main.
- Fix a long standing bug (since import in 1993) in snarf() where it
didn't strip whitespace correctly if the line consisted only of
whitespace.
- Lint cleanup.
- New Feature: "Header" command. This allows miscellaneous header
fields to be added to the header, e.g., "X-Organization:" or
"Reply-To:" fields.
- New Feature: "page-also" variable. This allows the specification of
additional commands to page. It is more flexible than "crt".
- Document the "pager-off" variable: if set, it disables paging
entirely.
2009-04-10 17:08:24 +04:00
|
|
|
{ "!", shell, 0, CMP(xF) T|I|STRLIST, 0, 0 },
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
{ "|", pipecmd, 0, CMP(xF) I|STRLIST, 0, 0 },
|
|
|
|
|
/* R */ { "copy", copycmd, 0, CMP(F) M|STRLIST, 0, 0 },
|
From Anon Ymous:
- Remove all longjmp(3) calls from signal handlers. Instead, we post
to an internal signal queue and check that periodically. All signal
related code is now in sig.c, except for the SIGCHLD handler which
remains in popen.c as it is intimately tied to routines there.
- Handle SIGPIPE in type1() regardless of mime support, or else the
handler in execute() will prevent our error code from being returned
resulting in 'sawcom' not being set on the first command as it should.
This only affected the initial behavior of the "next" command without
mime support.
- Add the 'T' flag to many commands in cmdtab.c that should not look
like the first command. E.g., start mail on a mailbox with multiple
messages, run "set foo", then "next", and watch the second message get
displayed rather than the first as is the case without the first "set"
command.
- Add file descriptor and file handle leak detection. Enabled by
DEBUG_FILE_LEAK. This will likely disappear in the future.
- Fix a long standing (since import in 1993) longjmp() bug in
edstop(): the jmpbuf was invalid when quit() is called at the end of
main.
- Fix a long standing bug (since import in 1993) in snarf() where it
didn't strip whitespace correctly if the line consisted only of
whitespace.
- Lint cleanup.
- New Feature: "Header" command. This allows miscellaneous header
fields to be added to the header, e.g., "X-Organization:" or
"Reply-To:" fields.
- New Feature: "page-also" variable. This allows the specification of
additional commands to page. It is more flexible than "crt".
- Document the "pager-off" variable: if set, it disables paging
entirely.
2009-04-10 17:08:24 +04:00
|
|
|
{ "chdir", schdir, 0, CMP(F) T|M|RAWLIST, 0, 1 },
|
|
|
|
|
{ "cd", schdir, 0, CMP(F) T|M|RAWLIST, 0, 1 },
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
/* R */ { "save", save, 0, CMP(F) STRLIST, 0, 0 },
|
|
|
|
|
/* R */ { "Save", Save, 0, CMP(F) STRLIST, 0, 0 },
|
From Anon Ymous:
- Remove all longjmp(3) calls from signal handlers. Instead, we post
to an internal signal queue and check that periodically. All signal
related code is now in sig.c, except for the SIGCHLD handler which
remains in popen.c as it is intimately tied to routines there.
- Handle SIGPIPE in type1() regardless of mime support, or else the
handler in execute() will prevent our error code from being returned
resulting in 'sawcom' not being set on the first command as it should.
This only affected the initial behavior of the "next" command without
mime support.
- Add the 'T' flag to many commands in cmdtab.c that should not look
like the first command. E.g., start mail on a mailbox with multiple
messages, run "set foo", then "next", and watch the second message get
displayed rather than the first as is the case without the first "set"
command.
- Add file descriptor and file handle leak detection. Enabled by
DEBUG_FILE_LEAK. This will likely disappear in the future.
- Fix a long standing (since import in 1993) longjmp() bug in
edstop(): the jmpbuf was invalid when quit() is called at the end of
main.
- Fix a long standing bug (since import in 1993) in snarf() where it
didn't strip whitespace correctly if the line consisted only of
whitespace.
- Lint cleanup.
- New Feature: "Header" command. This allows miscellaneous header
fields to be added to the header, e.g., "X-Organization:" or
"Reply-To:" fields.
- New Feature: "page-also" variable. This allows the specification of
additional commands to page. It is more flexible than "crt".
- Document the "pager-off" variable: if set, it disables paging
entirely.
2009-04-10 17:08:24 +04:00
|
|
|
{ "source", source, 0, CMP(F) T|M|RAWLIST, 1, 1 },
|
|
|
|
|
{ "set", set, S, CMP(sF) T|M|RAWLIST, 0, 1000 },
|
|
|
|
|
{ "shell", dosh, 0, CMP(n) T|I|NOLIST, 0, 0 },
|
|
|
|
|
{ "show", show, S, CMP(S) T|M|RAWLIST, 0, 1000 },
|
|
|
|
|
{ "version", pversion, S, CMP(n) T|M|NOLIST, 0, 0 },
|
|
|
|
|
{ "group", group, S, CMP(a) T|M|RAWLIST, 0, 1000 },
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
/* R */ { "write", swrite, 0, CMP(F) STRLIST, 0, 0 },
|
2006-12-15 23:26:03 +03:00
|
|
|
{ "from", from, S, CMP(n) MSGLIST, 0, MMNORM },
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
{ "file", file, 0, CMP(f) T|M|RAWLIST, 0, 1 },
|
|
|
|
|
{ "folder", file, 0, CMP(f) T|M|RAWLIST, 0, 1 },
|
2006-12-15 23:26:03 +03:00
|
|
|
{ "folders", folders, S, CMP(n) T|M|NOLIST, 0, 0 },
|
2007-10-30 05:28:30 +03:00
|
|
|
#ifdef MIME_SUPPORT
|
|
|
|
|
{ "forward", forward, 0, CMP(n) R|I|MSGLIST, 0, 0 },
|
|
|
|
|
#endif
|
2007-10-27 19:14:50 +04:00
|
|
|
{ "bounce", bounce, 0, CMP(n) R|I|MSGLIST, 0, 0 },
|
From Anon Ymous:
- Remove all longjmp(3) calls from signal handlers. Instead, we post
to an internal signal queue and check that periodically. All signal
related code is now in sig.c, except for the SIGCHLD handler which
remains in popen.c as it is intimately tied to routines there.
- Handle SIGPIPE in type1() regardless of mime support, or else the
handler in execute() will prevent our error code from being returned
resulting in 'sawcom' not being set on the first command as it should.
This only affected the initial behavior of the "next" command without
mime support.
- Add the 'T' flag to many commands in cmdtab.c that should not look
like the first command. E.g., start mail on a mailbox with multiple
messages, run "set foo", then "next", and watch the second message get
displayed rather than the first as is the case without the first "set"
command.
- Add file descriptor and file handle leak detection. Enabled by
DEBUG_FILE_LEAK. This will likely disappear in the future.
- Fix a long standing (since import in 1993) longjmp() bug in
edstop(): the jmpbuf was invalid when quit() is called at the end of
main.
- Fix a long standing bug (since import in 1993) in snarf() where it
didn't strip whitespace correctly if the line consisted only of
whitespace.
- Lint cleanup.
- New Feature: "Header" command. This allows miscellaneous header
fields to be added to the header, e.g., "X-Organization:" or
"Reply-To:" fields.
- New Feature: "page-also" variable. This allows the specification of
additional commands to page. It is more flexible than "crt".
- Document the "pager-off" variable: if set, it disables paging
entirely.
2009-04-10 17:08:24 +04:00
|
|
|
{ "?", help, S, CMP(n) T|M|NOLIST, 0, 0 },
|
2006-12-15 23:26:03 +03:00
|
|
|
{ "z", scroll, S, CMP(n) M|STRLIST, 0, 0 },
|
From Anon Ymous:
- Remove all longjmp(3) calls from signal handlers. Instead, we post
to an internal signal queue and check that periodically. All signal
related code is now in sig.c, except for the SIGCHLD handler which
remains in popen.c as it is intimately tied to routines there.
- Handle SIGPIPE in type1() regardless of mime support, or else the
handler in execute() will prevent our error code from being returned
resulting in 'sawcom' not being set on the first command as it should.
This only affected the initial behavior of the "next" command without
mime support.
- Add the 'T' flag to many commands in cmdtab.c that should not look
like the first command. E.g., start mail on a mailbox with multiple
messages, run "set foo", then "next", and watch the second message get
displayed rather than the first as is the case without the first "set"
command.
- Add file descriptor and file handle leak detection. Enabled by
DEBUG_FILE_LEAK. This will likely disappear in the future.
- Fix a long standing (since import in 1993) longjmp() bug in
edstop(): the jmpbuf was invalid when quit() is called at the end of
main.
- Fix a long standing bug (since import in 1993) in snarf() where it
didn't strip whitespace correctly if the line consisted only of
whitespace.
- Lint cleanup.
- New Feature: "Header" command. This allows miscellaneous header
fields to be added to the header, e.g., "X-Organization:" or
"Reply-To:" fields.
- New Feature: "page-also" variable. This allows the specification of
additional commands to page. It is more flexible than "crt".
- Document the "pager-off" variable: if set, it disables paging
entirely.
2009-04-10 17:08:24 +04:00
|
|
|
{ "headers", headers, S, CMP(n) T|MSGLIST, 0, MMNDEL },
|
|
|
|
|
{ "help", help, S, CMP(n) T|M|NOLIST, 0, 0 },
|
|
|
|
|
{ "=", pdot, S, CMP(n) T|MSGLIST, 0, MMNDEL },
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
{ "Reply", Respond, 0, CMP(n) R|I|MSGLIST, 0, MMNDEL },
|
|
|
|
|
{ "Respond", Respond, 0, CMP(n) R|I|MSGLIST, 0, MMNDEL },
|
|
|
|
|
{ "reply", respond, 0, CMP(n) R|I|MSGLIST, 0, MMNDEL },
|
|
|
|
|
{ "respond", respond, 0, CMP(n) R|I|MSGLIST, 0, MMNDEL },
|
|
|
|
|
{ "edit", editor, 0, CMP(n) I|MSGLIST, 0, MMNORM },
|
From Anon Ymous:
- Remove all longjmp(3) calls from signal handlers. Instead, we post
to an internal signal queue and check that periodically. All signal
related code is now in sig.c, except for the SIGCHLD handler which
remains in popen.c as it is intimately tied to routines there.
- Handle SIGPIPE in type1() regardless of mime support, or else the
handler in execute() will prevent our error code from being returned
resulting in 'sawcom' not being set on the first command as it should.
This only affected the initial behavior of the "next" command without
mime support.
- Add the 'T' flag to many commands in cmdtab.c that should not look
like the first command. E.g., start mail on a mailbox with multiple
messages, run "set foo", then "next", and watch the second message get
displayed rather than the first as is the case without the first "set"
command.
- Add file descriptor and file handle leak detection. Enabled by
DEBUG_FILE_LEAK. This will likely disappear in the future.
- Fix a long standing (since import in 1993) longjmp() bug in
edstop(): the jmpbuf was invalid when quit() is called at the end of
main.
- Fix a long standing bug (since import in 1993) in snarf() where it
didn't strip whitespace correctly if the line consisted only of
whitespace.
- Lint cleanup.
- New Feature: "Header" command. This allows miscellaneous header
fields to be added to the header, e.g., "X-Organization:" or
"Reply-To:" fields.
- New Feature: "page-also" variable. This allows the specification of
additional commands to page. It is more flexible than "crt".
- Document the "pager-off" variable: if set, it disables paging
entirely.
2009-04-10 17:08:24 +04:00
|
|
|
{ "echo", echo, S, CMP(F) T|M|RAWLIST, 0, 1000 },
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
{ "quit", quitcmd, 0, CMP(n) NOLIST, 0, 0 },
|
From Anon Ymous:
- Remove all longjmp(3) calls from signal handlers. Instead, we post
to an internal signal queue and check that periodically. All signal
related code is now in sig.c, except for the SIGCHLD handler which
remains in popen.c as it is intimately tied to routines there.
- Handle SIGPIPE in type1() regardless of mime support, or else the
handler in execute() will prevent our error code from being returned
resulting in 'sawcom' not being set on the first command as it should.
This only affected the initial behavior of the "next" command without
mime support.
- Add the 'T' flag to many commands in cmdtab.c that should not look
like the first command. E.g., start mail on a mailbox with multiple
messages, run "set foo", then "next", and watch the second message get
displayed rather than the first as is the case without the first "set"
command.
- Add file descriptor and file handle leak detection. Enabled by
DEBUG_FILE_LEAK. This will likely disappear in the future.
- Fix a long standing (since import in 1993) longjmp() bug in
edstop(): the jmpbuf was invalid when quit() is called at the end of
main.
- Fix a long standing bug (since import in 1993) in snarf() where it
didn't strip whitespace correctly if the line consisted only of
whitespace.
- Lint cleanup.
- New Feature: "Header" command. This allows miscellaneous header
fields to be added to the header, e.g., "X-Organization:" or
"Reply-To:" fields.
- New Feature: "page-also" variable. This allows the specification of
additional commands to page. It is more flexible than "crt".
- Document the "pager-off" variable: if set, it disables paging
entirely.
2009-04-10 17:08:24 +04:00
|
|
|
{ "list", pcmdlist, S, CMP(n) T|M|NOLIST, 0, 0 },
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
{ "xit", rexit, 0, CMP(n) M|NOLIST, 0, 0 },
|
|
|
|
|
{ "exit", rexit, 0, CMP(n) M|NOLIST, 0, 0 },
|
From Anon Ymous:
- Remove all longjmp(3) calls from signal handlers. Instead, we post
to an internal signal queue and check that periodically. All signal
related code is now in sig.c, except for the SIGCHLD handler which
remains in popen.c as it is intimately tied to routines there.
- Handle SIGPIPE in type1() regardless of mime support, or else the
handler in execute() will prevent our error code from being returned
resulting in 'sawcom' not being set on the first command as it should.
This only affected the initial behavior of the "next" command without
mime support.
- Add the 'T' flag to many commands in cmdtab.c that should not look
like the first command. E.g., start mail on a mailbox with multiple
messages, run "set foo", then "next", and watch the second message get
displayed rather than the first as is the case without the first "set"
command.
- Add file descriptor and file handle leak detection. Enabled by
DEBUG_FILE_LEAK. This will likely disappear in the future.
- Fix a long standing (since import in 1993) longjmp() bug in
edstop(): the jmpbuf was invalid when quit() is called at the end of
main.
- Fix a long standing bug (since import in 1993) in snarf() where it
didn't strip whitespace correctly if the line consisted only of
whitespace.
- Lint cleanup.
- New Feature: "Header" command. This allows miscellaneous header
fields to be added to the header, e.g., "X-Organization:" or
"Reply-To:" fields.
- New Feature: "page-also" variable. This allows the specification of
additional commands to page. It is more flexible than "crt".
- Document the "pager-off" variable: if set, it disables paging
entirely.
2009-04-10 17:08:24 +04:00
|
|
|
{ "size", messize, S, CMP(n) T|MSGLIST, 0, MMNDEL },
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
/* R */ { "hold", preserve, 0, CMP(n) W|MSGLIST, 0, MMNDEL },
|
From Anon Ymous:
- Remove all longjmp(3) calls from signal handlers. Instead, we post
to an internal signal queue and check that periodically. All signal
related code is now in sig.c, except for the SIGCHLD handler which
remains in popen.c as it is intimately tied to routines there.
- Handle SIGPIPE in type1() regardless of mime support, or else the
handler in execute() will prevent our error code from being returned
resulting in 'sawcom' not being set on the first command as it should.
This only affected the initial behavior of the "next" command without
mime support.
- Add the 'T' flag to many commands in cmdtab.c that should not look
like the first command. E.g., start mail on a mailbox with multiple
messages, run "set foo", then "next", and watch the second message get
displayed rather than the first as is the case without the first "set"
command.
- Add file descriptor and file handle leak detection. Enabled by
DEBUG_FILE_LEAK. This will likely disappear in the future.
- Fix a long standing (since import in 1993) longjmp() bug in
edstop(): the jmpbuf was invalid when quit() is called at the end of
main.
- Fix a long standing bug (since import in 1993) in snarf() where it
didn't strip whitespace correctly if the line consisted only of
whitespace.
- Lint cleanup.
- New Feature: "Header" command. This allows miscellaneous header
fields to be added to the header, e.g., "X-Organization:" or
"Reply-To:" fields.
- New Feature: "page-also" variable. This allows the specification of
additional commands to page. It is more flexible than "crt".
- Document the "pager-off" variable: if set, it disables paging
entirely.
2009-04-10 17:08:24 +04:00
|
|
|
{ "if", ifcmd, 0, CMP(F) T|F|M|RAWLIST, 1, 1 },
|
|
|
|
|
{ "ifdef", ifdefcmd, 0, CMP(F) T|F|M|RAWLIST, 1, 1 },
|
|
|
|
|
{ "ifndef", ifndefcmd, 0, CMP(F) T|F|M|RAWLIST, 1, 1 },
|
|
|
|
|
{ "else", elsecmd, 0, CMP(F) T|F|M|RAWLIST, 0, 0 },
|
|
|
|
|
{ "endif", endifcmd, 0, CMP(F) T|F|M|RAWLIST, 0, 0 },
|
|
|
|
|
{ "alternates", alternates, S, CMP(n) T|M|RAWLIST, 0, 1000 },
|
|
|
|
|
{ "ignore", igfield, S, CMP(n) T|M|RAWLIST, 0, 1000 },
|
|
|
|
|
{ "discard", igfield, S, CMP(n) T|M|RAWLIST, 0, 1000 },
|
|
|
|
|
{ "retain", retfield, S, CMP(n) T|M|RAWLIST, 0, 1000 },
|
|
|
|
|
{ "saveignore", saveigfield, S, CMP(n) T|M|RAWLIST, 0, 1000 },
|
|
|
|
|
{ "savediscard",saveigfield, S, CMP(n) T|M|RAWLIST, 0, 1000 },
|
|
|
|
|
{ "saveretain", saveretfield, S, CMP(n) T|M|RAWLIST, 0, 1000 },
|
|
|
|
|
{ "Header", Header, S, CMP(n) T|M|STRLIST, 0, 1000 },
|
|
|
|
|
{ "core", core, 0, CMP(F) T|M|NOLIST, 0, 0 },
|
|
|
|
|
{ "#", null, 0, CMP(n) T|M|NOLIST, 0, 0 },
|
|
|
|
|
{ "clobber", clobber, 0, CMP(n) T|M|RAWLIST, 0, 1 },
|
2006-12-15 23:26:03 +03:00
|
|
|
{ "inc", inc, S, CMP(n) T|NOLIST, 0, 0 },
|
From Anon Ymous:
- Remove all longjmp(3) calls from signal handlers. Instead, we post
to an internal signal queue and check that periodically. All signal
related code is now in sig.c, except for the SIGCHLD handler which
remains in popen.c as it is intimately tied to routines there.
- Handle SIGPIPE in type1() regardless of mime support, or else the
handler in execute() will prevent our error code from being returned
resulting in 'sawcom' not being set on the first command as it should.
This only affected the initial behavior of the "next" command without
mime support.
- Add the 'T' flag to many commands in cmdtab.c that should not look
like the first command. E.g., start mail on a mailbox with multiple
messages, run "set foo", then "next", and watch the second message get
displayed rather than the first as is the case without the first "set"
command.
- Add file descriptor and file handle leak detection. Enabled by
DEBUG_FILE_LEAK. This will likely disappear in the future.
- Fix a long standing (since import in 1993) longjmp() bug in
edstop(): the jmpbuf was invalid when quit() is called at the end of
main.
- Fix a long standing bug (since import in 1993) in snarf() where it
didn't strip whitespace correctly if the line consisted only of
whitespace.
- Lint cleanup.
- New Feature: "Header" command. This allows miscellaneous header
fields to be added to the header, e.g., "X-Organization:" or
"Reply-To:" fields.
- New Feature: "page-also" variable. This allows the specification of
additional commands to page. It is more flexible than "crt".
- Document the "pager-off" variable: if set, it disables paging
entirely.
2009-04-10 17:08:24 +04:00
|
|
|
{ "smopts", smoptscmd, S, CMP(m) T|M|RAWLIST, 0, 1000 },
|
|
|
|
|
{ "unsmopts", unsmoptscmd, S, CMP(M) T|M|RAWLIST, 1, 1000 },
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
/* R */ { "mkread", markread, 0, CMP(n) MSGLIST, 0, MMNDEL },
|
2006-10-22 01:37:20 +04:00
|
|
|
#ifdef MIME_SUPPORT
|
2006-12-15 23:26:03 +03:00
|
|
|
/* R */ { "detach", detach, S, CMP(F) STRLIST, 0, 0 },
|
|
|
|
|
/* R */ { "Detach", Detach, S, CMP(F) STRLIST, 0, 0 },
|
2006-10-22 01:37:20 +04:00
|
|
|
#endif
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
#ifdef THREAD_SUPPORT
|
|
|
|
|
{ "flatten", flattencmd, 0, CMP(n) T|NDMLIST, 0, MMNDEL },
|
|
|
|
|
{ "reverse", reversecmd, 0, CMP(n) T|STRLIST, 0, 0 },
|
|
|
|
|
{ "sort", sortcmd, 0, CMP(T) T|STRLIST, 0, 0 },
|
|
|
|
|
{ "thread", threadcmd, 0, CMP(T) T|STRLIST, 0, 0 },
|
|
|
|
|
{ "unthread", unthreadcmd, 0, CMP(n) T|STRLIST, 0, 0 },
|
|
|
|
|
|
|
|
|
|
{ "down", downcmd, 0, CMP(n) T|MSGLIST, 0, MMNDEL },
|
|
|
|
|
{ "tset", tsetcmd, 0, CMP(n) T|MSGLIST, 0, MMNDEL },
|
|
|
|
|
{ "up", upcmd, 0, CMP(n) T|STRLIST, 0, 0 },
|
|
|
|
|
|
|
|
|
|
{ "expose", exposecmd, 0, CMP(n) T|STRLIST, 0, 0 },
|
|
|
|
|
{ "hide", hidecmd, 0, CMP(n) T|STRLIST, 0, 0 },
|
|
|
|
|
{ "showthreads",exposecmd, 0, CMP(n) T|STRLIST, 0, 0 },
|
|
|
|
|
{ "hidethreads",hidecmd, 0, CMP(n) T|STRLIST, 0, 0 },
|
|
|
|
|
#ifdef THREAD_DEBUG
|
2006-12-15 23:26:03 +03:00
|
|
|
{ "debug_links",thread_showcmd, S, CMP(n) T|MSGLIST, 0, MMNDEL },
|
2006-10-31 23:07:32 +03:00
|
|
|
#endif
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
/* R */ { "tag", tagcmd, 0, CMP(n) T|MSGLIST, 0, MMNDEL },
|
|
|
|
|
/* R */ { "untag", untagcmd, 0, CMP(n) T|MSGLIST, 0, MMNDEL },
|
|
|
|
|
/* R */ { "invtags", invtagscmd, 0, CMP(n) T|MSGLIST, 0, MMNDEL },
|
|
|
|
|
{ "tagbelow", tagbelowcmd, 0, CMP(n) T|MSGLIST, 0, MMNDEL },
|
|
|
|
|
|
|
|
|
|
{ "hidetags", hidetagscmd, 0, CMP(n) T|STRLIST, 0, 0 },
|
|
|
|
|
{ "showtags", showtagscmd, 0, CMP(n) T|STRLIST, 0, 0 },
|
|
|
|
|
|
|
|
|
|
{ "deldups", deldupscmd, 0, CMP(n) T|STRLIST, 0, 0 },
|
|
|
|
|
#endif /* THREAD_SUPPORT */
|
|
|
|
|
{ 0, 0, 0, CMP0 0, 0, 0 }
|
1993-03-21 12:45:37 +03:00
|
|
|
};
|