NetBSD/sbin/newfs/mkfs.c

1540 lines
44 KiB
C
Raw Normal View History

/* $NetBSD: mkfs.c,v 1.89 2005/06/03 01:10:50 dbj Exp $ */
/*
* Copyright (c) 1980, 1989, 1993
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
1993-03-21 12:45:37 +03:00
/*
* Copyright (c) 2002 Networks Associates Technology, Inc.
* All rights reserved.
*
* This software was developed for the FreeBSD Project by Marshall
* Kirk McKusick and Network Associates Laboratories, the Security
* Research Division of Network Associates, Inc. under DARPA/SPAWAR
* contract N66001-01-C-8035 ("CBOSS"), as part of the DARPA CHATS
* research program
*
1993-03-21 12:45:37 +03:00
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
1997-07-01 02:20:30 +04:00
#include <sys/cdefs.h>
1993-03-21 12:45:37 +03:00
#ifndef lint
#if 0
static char sccsid[] = "@(#)mkfs.c 8.11 (Berkeley) 5/3/95";
#else
__RCSID("$NetBSD: mkfs.c,v 1.89 2005/06/03 01:10:50 dbj Exp $");
#endif
1993-03-21 12:45:37 +03:00
#endif /* not lint */
#include <sys/param.h>
#include <sys/mman.h>
1993-03-21 12:45:37 +03:00
#include <sys/time.h>
#include <sys/resource.h>
#include <ufs/ufs/dinode.h>
#include <ufs/ufs/dir.h>
#include <ufs/ufs/ufs_bswap.h>
#include <ufs/ffs/fs.h>
#include <ufs/ffs/ffs_extern.h>
1993-03-21 12:45:37 +03:00
#include <sys/disklabel.h>
#include <err.h>
#include <errno.h>
#include <string.h>
#include <unistd.h>
1997-07-01 02:20:30 +04:00
#include <stdlib.h>
#include <stddef.h>
#ifndef STANDALONE
#include <stdio.h>
#endif
#include "extern.h"
1993-03-21 12:45:37 +03:00
union dinode {
struct ufs1_dinode dp1;
struct ufs2_dinode dp2;
};
static void initcg(int, const struct timeval *);
static int fsinit(const struct timeval *, mode_t, uid_t, gid_t);
2000-12-01 14:52:54 +03:00
static int makedir(struct direct *, int);
static daddr_t alloc(int, int);
static void iput(union dinode *, ino_t);
2000-12-01 14:52:54 +03:00
static void rdfs(daddr_t, int, void *);
static void wtfs(daddr_t, int, void *);
static int isblock(struct fs *, unsigned char *, int);
static void clrblock(struct fs *, unsigned char *, int);
static void setblock(struct fs *, unsigned char *, int);
static int ilog2(int);
static void zap_old_sblock(int);
#ifdef MFS
static void calc_memfree(void);
static void *mkfs_malloc(size_t size);
#endif
static int count_digits(uint64_t);
1993-03-21 12:45:37 +03:00
/*
* make file system for cylinder-group style file systems
1993-03-21 12:45:37 +03:00
*/
#define UMASK 0755
#define POWEROF2(num) (((num) & ((num) - 1)) == 0)
1993-03-21 12:45:37 +03:00
union {
struct fs fs;
char pad[SBLOCKSIZE];
1993-03-21 12:45:37 +03:00
} fsun;
#define sblock fsun.fs
struct csum *fscs_0; /* first block of cylinder summaries */
struct csum *fscs_next; /* place for next summary */
struct csum *fscs_end; /* end of summary buffer */
struct csum *fscs_reset; /* place for next summary after write */
uint fs_csaddr; /* fragment number to write to */
1993-03-21 12:45:37 +03:00
union {
struct cg cg;
char pad[MAXBSIZE];
} cgun;
#define acg cgun.cg
#define DIP(dp, field) \
((sblock.fs_magic == FS_UFS1_MAGIC) ? \
(dp)->dp1.di_##field : (dp)->dp2.di_##field)
char *iobuf;
int iobufsize; /* size to end of 2nd inode block */
int iobuf_memsize; /* Actual buffer size */
1993-03-21 12:45:37 +03:00
int fsi, fso;
1997-07-01 02:20:30 +04:00
void
mkfs(struct partition *pp, const char *fsys, int fi, int fo,
mode_t mfsmode, uid_t mfsuid, gid_t mfsgid)
1993-03-21 12:45:37 +03:00
{
uint fragsperinodeblk, ncg;
uint cgzero;
uint64_t inodeblks, cgall;
int32_t cylno, i, csfrags;
struct timeval tv;
long long sizepb;
int nprintcols, printcolwidth;
1993-03-21 12:45:37 +03:00
#ifndef STANDALONE
gettimeofday(&tv, NULL);
1993-03-21 12:45:37 +03:00
#endif
#ifdef MFS
if (mfs && !Nflag) {
calc_memfree();
1993-03-21 12:45:37 +03:00
if (fssize * sectorsize > memleft)
fssize = memleft / sectorsize;
if ((membase = mkfs_malloc(fssize * sectorsize)) == 0)
1993-03-21 12:45:37 +03:00
exit(12);
}
#endif
1993-03-21 12:45:37 +03:00
fsi = fi;
fso = fo;
if (Oflag == 0) {
sblock.fs_old_inodefmt = FS_42INODEFMT;
sblock.fs_maxsymlinklen = 0;
sblock.fs_old_flags = 0;
} else {
sblock.fs_old_inodefmt = FS_44INODEFMT;
sblock.fs_maxsymlinklen = (Oflag == 1 ? MAXSYMLINKLEN_UFS1 :
MAXSYMLINKLEN_UFS2);
sblock.fs_old_flags = FS_FLAGS_UPDATED;
if (isappleufs)
sblock.fs_old_flags = 0;
sblock.fs_flags = 0;
}
Incorporate the enhanced ffs_dirpref() by Grigoriy Orlov, as found in FreeBSD (three commits; the initial work, man page updates, and a fix to ffs_reload()), with the following differences: - Be consistent between newfs(8) and tunefs(8) as to the options which set and control the tuning parameters for this work (avgfilesize & avgfpdir) - Use u_int16_t instead of u_int8_t to keep track of the number of contiguous directories (suggested by Chuck Silvers) - Work within our FFS_EI framework - Ensure that fs->fs_maxclusters and fs->fs_contigdirs don't point to the same area of memory The new algorithm has a marked performance increase, especially when performing tasks such as untarring pkgsrc.tar.gz, etc. The original FreeBSD commit messages are attached: ===== mckusick 2001/04/10 01:39:00 PDT Directory layout preference improvements from Grigoriy Orlov <gluk@ptci.ru>. His description of the problem and solution follow. My own tests show speedups on typical filesystem intensive workloads of 5% to 12% which is very impressive considering the small amount of code change involved. ------ One day I noticed that some file operations run much faster on small file systems then on big ones. I've looked at the ffs algorithms, thought about them, and redesigned the dirpref algorithm. First I want to describe the results of my tests. These results are old and I have improved the algorithm after these tests were done. Nevertheless they show how big the perfomance speedup may be. I have done two file/directory intensive tests on a two OpenBSD systems with old and new dirpref algorithm. The first test is "tar -xzf ports.tar.gz", the second is "rm -rf ports". The ports.tar.gz file is the ports collection from the OpenBSD 2.8 release. It contains 6596 directories and 13868 files. The test systems are: 1. Celeron-450, 128Mb, two IDE drives, the system at wd0, file system for test is at wd1. Size of test file system is 8 Gb, number of cg=991, size of cg is 8m, block size = 8k, fragment size = 1k OpenBSD-current from Dec 2000 with BUFCACHEPERCENT=35 2. PIII-600, 128Mb, two IBM DTLA-307045 IDE drives at i815e, the system at wd0, file system for test is at wd1. Size of test file system is 40 Gb, number of cg=5324, size of cg is 8m, block size = 8k, fragment size = 1k OpenBSD-current from Dec 2000 with BUFCACHEPERCENT=50 You can get more info about the test systems and methods at: http://www.ptci.ru/gluk/dirpref/old/dirpref.html Test Results tar -xzf ports.tar.gz rm -rf ports mode old dirpref new dirpref speedup old dirprefnew dirpref speedup First system normal 667 472 1.41 477 331 1.44 async 285 144 1.98 130 14 9.29 sync 768 616 1.25 477 334 1.43 softdep 413 252 1.64 241 38 6.34 Second system normal 329 81 4.06 263.5 93.5 2.81 async 302 25.7 11.75 112 2.26 49.56 sync 281 57.0 4.93 263 90.5 2.9 softdep 341 40.6 8.4 284 4.76 59.66 "old dirpref" and "new dirpref" columns give a test time in seconds. speedup - speed increasement in times, ie. old dirpref / new dirpref. ------ Algorithm description The old dirpref algorithm is described in comments: /* * Find a cylinder to place a directory. * * The policy implemented by this algorithm is to select from * among those cylinder groups with above the average number of * free inodes, the one with the smallest number of directories. */ A new directory is allocated in a different cylinder groups than its parent directory resulting in a directory tree that is spreaded across all the cylinder groups. This spreading out results in a non-optimal access to the directories and files. When we have a small filesystem it is not a problem but when the filesystem is big then perfomance degradation becomes very apparent. What I mean by a big file system ? 1. A big filesystem is a filesystem which occupy 20-30 or more percent of total drive space, i.e. first and last cylinder are physically located relatively far from each other. 2. It has a relatively large number of cylinder groups, for example more cylinder groups than 50% of the buffers in the buffer cache. The first results in long access times, while the second results in many buffers being used by metadata operations. Such operations use cylinder group blocks and on-disk inode blocks. The cylinder group block (fs->fs_cblkno) contains struct cg, inode and block bit maps. It is 2k in size for the default filesystem parameters. If new and parent directories are located in different cylinder groups then the system performs more input/output operations and uses more buffers. On filesystems with many cylinder groups, lots of cache buffers are used for metadata operations. My solution for this problem is very simple. I allocate many directories in one cylinder group. I also do some things, so that the new allocation method does not cause excessive fragmentation and all directory inodes will not be located at a location far from its file's inodes and data. The algorithm is: /* * Find a cylinder group to place a directory. * * The policy implemented by this algorithm is to allocate a * directory inode in the same cylinder group as its parent * directory, but also to reserve space for its files inodes * and data. Restrict the number of directories which may be * allocated one after another in the same cylinder group * without intervening allocation of files. * * If we allocate a first level directory then force allocation * in another cylinder group. */ My early versions of dirpref give me a good results for a wide range of file operations and different filesystem capacities except one case: those applications that create their entire directory structure first and only later fill this structure with files. My solution for such and similar cases is to limit a number of directories which may be created one after another in the same cylinder group without intervening file creations. For this purpose, I allocate an array of counters at mount time. This array is linked to the superblock fs->fs_contigdirs[cg]. Each time a directory is created the counter increases and each time a file is created the counter decreases. A 60Gb filesystem with 8mb/cg requires 10kb of memory for the counters array. The maxcontigdirs is a maximum number of directories which may be created without an intervening file creation. I found in my tests that the best performance occurs when I restrict the number of directories in one cylinder group such that all its files may be located in the same cylinder group. There may be some deterioration in performance if all the file inodes are in the same cylinder group as its containing directory, but their data partially resides in a different cylinder group. The maxcontigdirs value is calculated to try to prevent this condition. Since there is no way to know how many files and directories will be allocated later I added two optimization parameters in superblock/tunefs. They are: int32_t fs_avgfilesize; /* expected average file size */ int32_t fs_avgfpdir; /* expected # of files per directory */ These parameters have reasonable defaults but may be tweeked for special uses of a filesystem. They are only necessary in rare cases like better tuning a filesystem being used to store a squid cache. I have been using this algorithm for about 3 months. I have done a lot of testing on filesystems with different capacities, average filesize, average number of files per directory, and so on. I think this algorithm has no negative impact on filesystem perfomance. It works better than the default one in all cases. The new dirpref will greatly improve untarring/removing/coping of big directories, decrease load on cvs servers and much more. The new dirpref doesn't speedup a compilation process, but also doesn't slow it down. Obtained from: Grigoriy Orlov <gluk@ptci.ru> ===== ===== iedowse 2001/04/23 17:37:17 PDT Pre-dirpref versions of fsck may zero out the new superblock fields fs_contigdirs, fs_avgfilesize and fs_avgfpdir. This could cause panics if these fields were zeroed while a filesystem was mounted read-only, and then remounted read-write. Add code to ffs_reload() which copies the fs_contigdirs pointer from the previous superblock, and reinitialises fs_avgf* if necessary. Reviewed by: mckusick ===== ===== nik 2001/04/10 03:36:44 PDT Add information about the new options to newfs and tunefs which set the expected average file size and number of files per directory. Could do with some fleshing out. =====
2001-09-06 06:16:00 +04:00
/*
* collect and verify the filesystem density info
*/
sblock.fs_avgfilesize = avgfilesize;
sblock.fs_avgfpdir = avgfpdir;
if (sblock.fs_avgfilesize <= 0) {
Incorporate the enhanced ffs_dirpref() by Grigoriy Orlov, as found in FreeBSD (three commits; the initial work, man page updates, and a fix to ffs_reload()), with the following differences: - Be consistent between newfs(8) and tunefs(8) as to the options which set and control the tuning parameters for this work (avgfilesize & avgfpdir) - Use u_int16_t instead of u_int8_t to keep track of the number of contiguous directories (suggested by Chuck Silvers) - Work within our FFS_EI framework - Ensure that fs->fs_maxclusters and fs->fs_contigdirs don't point to the same area of memory The new algorithm has a marked performance increase, especially when performing tasks such as untarring pkgsrc.tar.gz, etc. The original FreeBSD commit messages are attached: ===== mckusick 2001/04/10 01:39:00 PDT Directory layout preference improvements from Grigoriy Orlov <gluk@ptci.ru>. His description of the problem and solution follow. My own tests show speedups on typical filesystem intensive workloads of 5% to 12% which is very impressive considering the small amount of code change involved. ------ One day I noticed that some file operations run much faster on small file systems then on big ones. I've looked at the ffs algorithms, thought about them, and redesigned the dirpref algorithm. First I want to describe the results of my tests. These results are old and I have improved the algorithm after these tests were done. Nevertheless they show how big the perfomance speedup may be. I have done two file/directory intensive tests on a two OpenBSD systems with old and new dirpref algorithm. The first test is "tar -xzf ports.tar.gz", the second is "rm -rf ports". The ports.tar.gz file is the ports collection from the OpenBSD 2.8 release. It contains 6596 directories and 13868 files. The test systems are: 1. Celeron-450, 128Mb, two IDE drives, the system at wd0, file system for test is at wd1. Size of test file system is 8 Gb, number of cg=991, size of cg is 8m, block size = 8k, fragment size = 1k OpenBSD-current from Dec 2000 with BUFCACHEPERCENT=35 2. PIII-600, 128Mb, two IBM DTLA-307045 IDE drives at i815e, the system at wd0, file system for test is at wd1. Size of test file system is 40 Gb, number of cg=5324, size of cg is 8m, block size = 8k, fragment size = 1k OpenBSD-current from Dec 2000 with BUFCACHEPERCENT=50 You can get more info about the test systems and methods at: http://www.ptci.ru/gluk/dirpref/old/dirpref.html Test Results tar -xzf ports.tar.gz rm -rf ports mode old dirpref new dirpref speedup old dirprefnew dirpref speedup First system normal 667 472 1.41 477 331 1.44 async 285 144 1.98 130 14 9.29 sync 768 616 1.25 477 334 1.43 softdep 413 252 1.64 241 38 6.34 Second system normal 329 81 4.06 263.5 93.5 2.81 async 302 25.7 11.75 112 2.26 49.56 sync 281 57.0 4.93 263 90.5 2.9 softdep 341 40.6 8.4 284 4.76 59.66 "old dirpref" and "new dirpref" columns give a test time in seconds. speedup - speed increasement in times, ie. old dirpref / new dirpref. ------ Algorithm description The old dirpref algorithm is described in comments: /* * Find a cylinder to place a directory. * * The policy implemented by this algorithm is to select from * among those cylinder groups with above the average number of * free inodes, the one with the smallest number of directories. */ A new directory is allocated in a different cylinder groups than its parent directory resulting in a directory tree that is spreaded across all the cylinder groups. This spreading out results in a non-optimal access to the directories and files. When we have a small filesystem it is not a problem but when the filesystem is big then perfomance degradation becomes very apparent. What I mean by a big file system ? 1. A big filesystem is a filesystem which occupy 20-30 or more percent of total drive space, i.e. first and last cylinder are physically located relatively far from each other. 2. It has a relatively large number of cylinder groups, for example more cylinder groups than 50% of the buffers in the buffer cache. The first results in long access times, while the second results in many buffers being used by metadata operations. Such operations use cylinder group blocks and on-disk inode blocks. The cylinder group block (fs->fs_cblkno) contains struct cg, inode and block bit maps. It is 2k in size for the default filesystem parameters. If new and parent directories are located in different cylinder groups then the system performs more input/output operations and uses more buffers. On filesystems with many cylinder groups, lots of cache buffers are used for metadata operations. My solution for this problem is very simple. I allocate many directories in one cylinder group. I also do some things, so that the new allocation method does not cause excessive fragmentation and all directory inodes will not be located at a location far from its file's inodes and data. The algorithm is: /* * Find a cylinder group to place a directory. * * The policy implemented by this algorithm is to allocate a * directory inode in the same cylinder group as its parent * directory, but also to reserve space for its files inodes * and data. Restrict the number of directories which may be * allocated one after another in the same cylinder group * without intervening allocation of files. * * If we allocate a first level directory then force allocation * in another cylinder group. */ My early versions of dirpref give me a good results for a wide range of file operations and different filesystem capacities except one case: those applications that create their entire directory structure first and only later fill this structure with files. My solution for such and similar cases is to limit a number of directories which may be created one after another in the same cylinder group without intervening file creations. For this purpose, I allocate an array of counters at mount time. This array is linked to the superblock fs->fs_contigdirs[cg]. Each time a directory is created the counter increases and each time a file is created the counter decreases. A 60Gb filesystem with 8mb/cg requires 10kb of memory for the counters array. The maxcontigdirs is a maximum number of directories which may be created without an intervening file creation. I found in my tests that the best performance occurs when I restrict the number of directories in one cylinder group such that all its files may be located in the same cylinder group. There may be some deterioration in performance if all the file inodes are in the same cylinder group as its containing directory, but their data partially resides in a different cylinder group. The maxcontigdirs value is calculated to try to prevent this condition. Since there is no way to know how many files and directories will be allocated later I added two optimization parameters in superblock/tunefs. They are: int32_t fs_avgfilesize; /* expected average file size */ int32_t fs_avgfpdir; /* expected # of files per directory */ These parameters have reasonable defaults but may be tweeked for special uses of a filesystem. They are only necessary in rare cases like better tuning a filesystem being used to store a squid cache. I have been using this algorithm for about 3 months. I have done a lot of testing on filesystems with different capacities, average filesize, average number of files per directory, and so on. I think this algorithm has no negative impact on filesystem perfomance. It works better than the default one in all cases. The new dirpref will greatly improve untarring/removing/coping of big directories, decrease load on cvs servers and much more. The new dirpref doesn't speedup a compilation process, but also doesn't slow it down. Obtained from: Grigoriy Orlov <gluk@ptci.ru> ===== ===== iedowse 2001/04/23 17:37:17 PDT Pre-dirpref versions of fsck may zero out the new superblock fields fs_contigdirs, fs_avgfilesize and fs_avgfpdir. This could cause panics if these fields were zeroed while a filesystem was mounted read-only, and then remounted read-write. Add code to ffs_reload() which copies the fs_contigdirs pointer from the previous superblock, and reinitialises fs_avgf* if necessary. Reviewed by: mckusick ===== ===== nik 2001/04/10 03:36:44 PDT Add information about the new options to newfs and tunefs which set the expected average file size and number of files per directory. Could do with some fleshing out. =====
2001-09-06 06:16:00 +04:00
printf("illegal expected average file size %d\n",
sblock.fs_avgfilesize);
exit(14);
}
if (sblock.fs_avgfpdir <= 0) {
Incorporate the enhanced ffs_dirpref() by Grigoriy Orlov, as found in FreeBSD (three commits; the initial work, man page updates, and a fix to ffs_reload()), with the following differences: - Be consistent between newfs(8) and tunefs(8) as to the options which set and control the tuning parameters for this work (avgfilesize & avgfpdir) - Use u_int16_t instead of u_int8_t to keep track of the number of contiguous directories (suggested by Chuck Silvers) - Work within our FFS_EI framework - Ensure that fs->fs_maxclusters and fs->fs_contigdirs don't point to the same area of memory The new algorithm has a marked performance increase, especially when performing tasks such as untarring pkgsrc.tar.gz, etc. The original FreeBSD commit messages are attached: ===== mckusick 2001/04/10 01:39:00 PDT Directory layout preference improvements from Grigoriy Orlov <gluk@ptci.ru>. His description of the problem and solution follow. My own tests show speedups on typical filesystem intensive workloads of 5% to 12% which is very impressive considering the small amount of code change involved. ------ One day I noticed that some file operations run much faster on small file systems then on big ones. I've looked at the ffs algorithms, thought about them, and redesigned the dirpref algorithm. First I want to describe the results of my tests. These results are old and I have improved the algorithm after these tests were done. Nevertheless they show how big the perfomance speedup may be. I have done two file/directory intensive tests on a two OpenBSD systems with old and new dirpref algorithm. The first test is "tar -xzf ports.tar.gz", the second is "rm -rf ports". The ports.tar.gz file is the ports collection from the OpenBSD 2.8 release. It contains 6596 directories and 13868 files. The test systems are: 1. Celeron-450, 128Mb, two IDE drives, the system at wd0, file system for test is at wd1. Size of test file system is 8 Gb, number of cg=991, size of cg is 8m, block size = 8k, fragment size = 1k OpenBSD-current from Dec 2000 with BUFCACHEPERCENT=35 2. PIII-600, 128Mb, two IBM DTLA-307045 IDE drives at i815e, the system at wd0, file system for test is at wd1. Size of test file system is 40 Gb, number of cg=5324, size of cg is 8m, block size = 8k, fragment size = 1k OpenBSD-current from Dec 2000 with BUFCACHEPERCENT=50 You can get more info about the test systems and methods at: http://www.ptci.ru/gluk/dirpref/old/dirpref.html Test Results tar -xzf ports.tar.gz rm -rf ports mode old dirpref new dirpref speedup old dirprefnew dirpref speedup First system normal 667 472 1.41 477 331 1.44 async 285 144 1.98 130 14 9.29 sync 768 616 1.25 477 334 1.43 softdep 413 252 1.64 241 38 6.34 Second system normal 329 81 4.06 263.5 93.5 2.81 async 302 25.7 11.75 112 2.26 49.56 sync 281 57.0 4.93 263 90.5 2.9 softdep 341 40.6 8.4 284 4.76 59.66 "old dirpref" and "new dirpref" columns give a test time in seconds. speedup - speed increasement in times, ie. old dirpref / new dirpref. ------ Algorithm description The old dirpref algorithm is described in comments: /* * Find a cylinder to place a directory. * * The policy implemented by this algorithm is to select from * among those cylinder groups with above the average number of * free inodes, the one with the smallest number of directories. */ A new directory is allocated in a different cylinder groups than its parent directory resulting in a directory tree that is spreaded across all the cylinder groups. This spreading out results in a non-optimal access to the directories and files. When we have a small filesystem it is not a problem but when the filesystem is big then perfomance degradation becomes very apparent. What I mean by a big file system ? 1. A big filesystem is a filesystem which occupy 20-30 or more percent of total drive space, i.e. first and last cylinder are physically located relatively far from each other. 2. It has a relatively large number of cylinder groups, for example more cylinder groups than 50% of the buffers in the buffer cache. The first results in long access times, while the second results in many buffers being used by metadata operations. Such operations use cylinder group blocks and on-disk inode blocks. The cylinder group block (fs->fs_cblkno) contains struct cg, inode and block bit maps. It is 2k in size for the default filesystem parameters. If new and parent directories are located in different cylinder groups then the system performs more input/output operations and uses more buffers. On filesystems with many cylinder groups, lots of cache buffers are used for metadata operations. My solution for this problem is very simple. I allocate many directories in one cylinder group. I also do some things, so that the new allocation method does not cause excessive fragmentation and all directory inodes will not be located at a location far from its file's inodes and data. The algorithm is: /* * Find a cylinder group to place a directory. * * The policy implemented by this algorithm is to allocate a * directory inode in the same cylinder group as its parent * directory, but also to reserve space for its files inodes * and data. Restrict the number of directories which may be * allocated one after another in the same cylinder group * without intervening allocation of files. * * If we allocate a first level directory then force allocation * in another cylinder group. */ My early versions of dirpref give me a good results for a wide range of file operations and different filesystem capacities except one case: those applications that create their entire directory structure first and only later fill this structure with files. My solution for such and similar cases is to limit a number of directories which may be created one after another in the same cylinder group without intervening file creations. For this purpose, I allocate an array of counters at mount time. This array is linked to the superblock fs->fs_contigdirs[cg]. Each time a directory is created the counter increases and each time a file is created the counter decreases. A 60Gb filesystem with 8mb/cg requires 10kb of memory for the counters array. The maxcontigdirs is a maximum number of directories which may be created without an intervening file creation. I found in my tests that the best performance occurs when I restrict the number of directories in one cylinder group such that all its files may be located in the same cylinder group. There may be some deterioration in performance if all the file inodes are in the same cylinder group as its containing directory, but their data partially resides in a different cylinder group. The maxcontigdirs value is calculated to try to prevent this condition. Since there is no way to know how many files and directories will be allocated later I added two optimization parameters in superblock/tunefs. They are: int32_t fs_avgfilesize; /* expected average file size */ int32_t fs_avgfpdir; /* expected # of files per directory */ These parameters have reasonable defaults but may be tweeked for special uses of a filesystem. They are only necessary in rare cases like better tuning a filesystem being used to store a squid cache. I have been using this algorithm for about 3 months. I have done a lot of testing on filesystems with different capacities, average filesize, average number of files per directory, and so on. I think this algorithm has no negative impact on filesystem perfomance. It works better than the default one in all cases. The new dirpref will greatly improve untarring/removing/coping of big directories, decrease load on cvs servers and much more. The new dirpref doesn't speedup a compilation process, but also doesn't slow it down. Obtained from: Grigoriy Orlov <gluk@ptci.ru> ===== ===== iedowse 2001/04/23 17:37:17 PDT Pre-dirpref versions of fsck may zero out the new superblock fields fs_contigdirs, fs_avgfilesize and fs_avgfpdir. This could cause panics if these fields were zeroed while a filesystem was mounted read-only, and then remounted read-write. Add code to ffs_reload() which copies the fs_contigdirs pointer from the previous superblock, and reinitialises fs_avgf* if necessary. Reviewed by: mckusick ===== ===== nik 2001/04/10 03:36:44 PDT Add information about the new options to newfs and tunefs which set the expected average file size and number of files per directory. Could do with some fleshing out. =====
2001-09-06 06:16:00 +04:00
printf("illegal expected number of files per directory %d\n",
sblock.fs_avgfpdir);
exit(15);
}
1993-03-21 12:45:37 +03:00
/*
* collect and verify the block and fragment sizes
*/
sblock.fs_bsize = bsize;
sblock.fs_fsize = fsize;
if (!POWEROF2(sblock.fs_bsize)) {
printf("block size must be a power of 2, not %d\n",
sblock.fs_bsize);
exit(16);
}
if (!POWEROF2(sblock.fs_fsize)) {
printf("fragment size must be a power of 2, not %d\n",
sblock.fs_fsize);
exit(17);
}
if (sblock.fs_fsize < sectorsize) {
printf("fragment size %d is too small, minimum is %d\n",
sblock.fs_fsize, sectorsize);
exit(18);
}
if (sblock.fs_bsize < MINBSIZE) {
printf("block size %d is too small, minimum is %d\n",
sblock.fs_bsize, MINBSIZE);
exit(19);
}
2001-12-13 09:31:31 +03:00
if (sblock.fs_bsize > MAXBSIZE) {
printf("block size %d is too large, maximum is %d\n",
sblock.fs_bsize, MAXBSIZE);
exit(19);
}
1993-03-21 12:45:37 +03:00
if (sblock.fs_bsize < sblock.fs_fsize) {
printf("block size (%d) cannot be smaller than fragment size (%d)\n",
sblock.fs_bsize, sblock.fs_fsize);
exit(20);
}
if (maxbsize < bsize || !POWEROF2(maxbsize)) {
sblock.fs_maxbsize = sblock.fs_bsize;
} else if (sblock.fs_maxbsize > FS_MAXCONTIG * sblock.fs_bsize) {
sblock.fs_maxbsize = FS_MAXCONTIG * sblock.fs_bsize;
} else {
sblock.fs_maxbsize = maxbsize;
}
sblock.fs_maxcontig = maxcontig;
if (sblock.fs_maxcontig < sblock.fs_maxbsize / sblock.fs_bsize) {
sblock.fs_maxcontig = sblock.fs_maxbsize / sblock.fs_bsize;
printf("Maxcontig raised to %d\n", sblock.fs_maxbsize);
}
if (sblock.fs_maxcontig > 1)
sblock.fs_contigsumsize = MIN(sblock.fs_maxcontig,FS_MAXCONTIG);
1993-03-21 12:45:37 +03:00
sblock.fs_bmask = ~(sblock.fs_bsize - 1);
sblock.fs_fmask = ~(sblock.fs_fsize - 1);
sblock.fs_qbmask = ~sblock.fs_bmask;
sblock.fs_qfmask = ~sblock.fs_fmask;
1993-03-21 12:45:37 +03:00
for (sblock.fs_bshift = 0, i = sblock.fs_bsize; i > 1; i >>= 1)
sblock.fs_bshift++;
for (sblock.fs_fshift = 0, i = sblock.fs_fsize; i > 1; i >>= 1)
sblock.fs_fshift++;
sblock.fs_frag = numfrags(&sblock, sblock.fs_bsize);
for (sblock.fs_fragshift = 0, i = sblock.fs_frag; i > 1; i >>= 1)
sblock.fs_fragshift++;
if (sblock.fs_frag > MAXFRAG) {
printf("fragment size %d is too small, "
"minimum with block size %d is %d\n",
1993-03-21 12:45:37 +03:00
sblock.fs_fsize, sblock.fs_bsize,
sblock.fs_bsize / MAXFRAG);
exit(21);
}
sblock.fs_fsbtodb = ilog2(sblock.fs_fsize / sectorsize);
sblock.fs_size = dbtofsb(&sblock, fssize);
if (Oflag <= 1) {
if (sblock.fs_size >= 1ull << 31) {
printf("Too many fragments (0x%" PRIx64
") for a UFS1 filesystem\n", sblock.fs_size);
exit(22);
}
sblock.fs_magic = FS_UFS1_MAGIC;
sblock.fs_sblockloc = SBLOCK_UFS1;
sblock.fs_nindir = sblock.fs_bsize / sizeof(int32_t);
sblock.fs_inopb = sblock.fs_bsize / sizeof(struct ufs1_dinode);
sblock.fs_maxsymlinklen = ((NDADDR + NIADDR) *
sizeof (int32_t));
sblock.fs_old_inodefmt = FS_44INODEFMT;
sblock.fs_old_cgoffset = 0;
sblock.fs_old_cgmask = 0xffffffff;
sblock.fs_old_size = sblock.fs_size;
sblock.fs_old_rotdelay = 0;
sblock.fs_old_rps = 60;
sblock.fs_old_nspf = sblock.fs_fsize / sectorsize;
sblock.fs_old_cpg = 1;
sblock.fs_old_interleave = 1;
sblock.fs_old_trackskew = 0;
sblock.fs_old_cpc = 0;
sblock.fs_old_postblformat = FS_DYNAMICPOSTBLFMT;
sblock.fs_old_nrpos = 1;
} else {
sblock.fs_magic = FS_UFS2_MAGIC;
sblock.fs_sblockloc = SBLOCK_UFS2;
sblock.fs_nindir = sblock.fs_bsize / sizeof(int64_t);
sblock.fs_inopb = sblock.fs_bsize / sizeof(struct ufs2_dinode);
sblock.fs_maxsymlinklen = ((NDADDR + NIADDR) *
sizeof (int64_t));
}
1993-03-21 12:45:37 +03:00
sblock.fs_sblkno =
roundup(howmany(sblock.fs_sblockloc + SBLOCKSIZE, sblock.fs_fsize),
sblock.fs_frag);
1993-03-21 12:45:37 +03:00
sblock.fs_cblkno = (daddr_t)(sblock.fs_sblkno +
roundup(howmany(SBLOCKSIZE, sblock.fs_fsize), sblock.fs_frag));
1993-03-21 12:45:37 +03:00
sblock.fs_iblkno = sblock.fs_cblkno + sblock.fs_frag;
sblock.fs_maxfilesize = sblock.fs_bsize * NDADDR - 1;
for (sizepb = sblock.fs_bsize, i = 0; i < NIADDR; i++) {
sizepb *= NINDIR(&sblock);
sblock.fs_maxfilesize += sizepb;
}
1993-03-21 12:45:37 +03:00
/*
* Calculate the number of blocks to put into each cylinder group.
*
* The cylinder group size is limited because the data structure
* must fit into a single block.
* We try to have as few cylinder groups as possible, with a proviso
* that we create at least MINCYLGRPS (==4) except for small
* filesystems.
*
* This algorithm works out how many blocks of inodes would be
* needed to fill the entire volume at the specified density.
* It then looks at how big the 'cylinder block' would have to
* be and, assuming that it is linearly related to the number
* of inodes and blocks how many cylinder groups are needed to
* keep the cylinder block below the filesystem block size.
*
* The cylinder groups are then all created with the average size.
*
* Space taken by the red tape on cylinder groups other than the
* first is ignored.
1993-03-21 12:45:37 +03:00
*/
/* There must be space for 1 inode block and 2 data blocks */
if (sblock.fs_size < sblock.fs_iblkno + 3 * sblock.fs_frag) {
printf("Filesystem size %lld < minimum size of %d\n",
(long long)sblock.fs_size, sblock.fs_iblkno + 3 * sblock.fs_frag);
exit(23);
1993-03-21 12:45:37 +03:00
}
if (num_inodes != 0)
inodeblks = howmany(num_inodes, INOPB(&sblock));
else {
/*
* Calculate 'per inode block' so we can allocate less than
* 1 fragment per inode - useful for /dev.
*/
fragsperinodeblk = MAX(numfrags(&sblock,
density * INOPB(&sblock)), 1);
inodeblks = (sblock.fs_size - sblock.fs_iblkno) /
(sblock.fs_frag + fragsperinodeblk);
}
if (inodeblks == 0)
inodeblks = 1;
/* Ensure that there are at least 2 data blocks (or we fail below) */
if (inodeblks > (sblock.fs_size - sblock.fs_iblkno)/sblock.fs_frag - 2)
inodeblks = (sblock.fs_size-sblock.fs_iblkno)/sblock.fs_frag-2;
/* Even UFS2 limits number of inodes to 2^31 (fs_ipg is int32_t) */
if (inodeblks * INOPB(&sblock) >= 1ull << 31)
inodeblks = ((1ull << 31) - NBBY) / INOPB(&sblock);
/*
* See what would happen if we tried to use 1 cylinder group.
* Assume space linear, so work out number of cylinder groups needed.
* Subtract one from the allowed size to compensate for rounding
* a number of bits up to a complete byte.
1993-03-21 12:45:37 +03:00
*/
cgzero = CGSIZE_IF(&sblock, 0, 0);
cgall = CGSIZE_IF(&sblock, inodeblks * INOPB(&sblock), sblock.fs_size);
ncg = howmany(cgall - cgzero, sblock.fs_bsize - cgzero - 1);
if (ncg < MINCYLGRPS) {
/*
* We would like to allocate MINCLYGRPS cylinder groups,
* but for small file sytems (especially ones with a lot
* of inodes) this is not desirable (or possible).
*/
i = sblock.fs_size / 2 / (sblock.fs_iblkno +
inodeblks * sblock.fs_frag);
if (i > ncg)
ncg = i;
if (ncg > MINCYLGRPS)
ncg = MINCYLGRPS;
if (ncg > inodeblks)
ncg = inodeblks;
1993-03-21 12:45:37 +03:00
}
/*
* Put an equal number of blocks in each cylinder group.
* Round up so we don't have more fragments in the last CG than
* the earlier ones (does that matter?), but kill a block if the
* CGSIZE becomes too big (only happens if there are a lot of CGs).
1993-03-21 12:45:37 +03:00
*/
sblock.fs_fpg = roundup(howmany(sblock.fs_size, ncg), sblock.fs_frag);
i = CGSIZE_IF(&sblock, inodeblks * INOPB(&sblock) / ncg, sblock.fs_fpg);
if (i > sblock.fs_bsize)
sblock.fs_fpg -= (i - sblock.fs_bsize) * NBBY;
/* ... and recalculate how many cylinder groups we now need */
ncg = howmany(sblock.fs_size, sblock.fs_fpg);
inodeblks /= ncg;
if (inodeblks == 0)
inodeblks = 1;
sblock.fs_ipg = inodeblks * INOPB(&sblock);
/* Sanity check on our sums... */
if (CGSIZE(&sblock) > sblock.fs_bsize) {
printf("CGSIZE miscalculated %d > %d\n",
(int)CGSIZE(&sblock), sblock.fs_bsize);
exit(24);
1993-03-21 12:45:37 +03:00
}
/* Check that the last cylinder group has enough space for the inodes */
i = sblock.fs_size - sblock.fs_fpg * (ncg - 1ull);
if (i < sblock.fs_iblkno + inodeblks * sblock.fs_frag) {
/*
* Since we make all the cylinder groups the same size, the
* last will only be small if there are a large number of
* cylinder groups. If we pull even a fragment from each
* of the other groups then the last CG will be overfull.
* So we just kill the last CG.
*/
ncg--;
sblock.fs_size -= i;
}
sblock.fs_ncg = ncg;
1993-03-21 12:45:37 +03:00
sblock.fs_cgsize = fragroundup(&sblock, CGSIZE(&sblock));
sblock.fs_dblkno = sblock.fs_iblkno + sblock.fs_ipg / INOPF(&sblock);
if (Oflag <= 1) {
sblock.fs_old_spc = sblock.fs_fpg * sblock.fs_old_nspf;
sblock.fs_old_nsect = sblock.fs_old_spc;
sblock.fs_old_npsect = sblock.fs_old_spc;
sblock.fs_old_ncyl = sblock.fs_ncg;
1993-03-21 12:45:37 +03:00
}
1993-03-21 12:45:37 +03:00
/*
* Cylinder group summary information for each cylinder is written
* into the first cylinder group.
* Write this fragment by fragment, but doing the first CG last
* (after we've taken stuff off for the structure itself and the
* root directory.
1993-03-21 12:45:37 +03:00
*/
sblock.fs_csaddr = cgdmin(&sblock, 0);
sblock.fs_cssize =
fragroundup(&sblock, sblock.fs_ncg * sizeof(struct csum));
if (512 % sizeof *fscs_0)
errx(1, "cylinder group summary doesn't fit in sectors");
fscs_0 = mmap(0, 2 * sblock.fs_fsize, PROT_READ|PROT_WRITE,
MAP_ANON|MAP_PRIVATE, -1, 0);
if (fscs_0 == NULL)
exit(39);
memset(fscs_0, 0, 2 * sblock.fs_fsize);
fs_csaddr = sblock.fs_csaddr;
fscs_next = fscs_0;
fscs_end = (void *)((char *)fscs_0 + 2 * sblock.fs_fsize);
fscs_reset = (void *)((char *)fscs_0 + sblock.fs_fsize);
/*
* fill in remaining fields of the super block
*/
sblock.fs_sbsize = fragroundup(&sblock, sizeof(struct fs));
if (sblock.fs_sbsize > SBLOCKSIZE)
sblock.fs_sbsize = SBLOCKSIZE;
1993-03-21 12:45:37 +03:00
sblock.fs_minfree = minfree;
sblock.fs_maxcontig = maxcontig;
sblock.fs_maxbpg = maxbpg;
sblock.fs_optim = opt;
sblock.fs_cgrotor = 0;
sblock.fs_pendingblocks = 0;
sblock.fs_pendinginodes = 0;
1993-03-21 12:45:37 +03:00
sblock.fs_cstotal.cs_ndir = 0;
sblock.fs_cstotal.cs_nbfree = 0;
sblock.fs_cstotal.cs_nifree = 0;
sblock.fs_cstotal.cs_nffree = 0;
sblock.fs_fmod = 0;
sblock.fs_ronly = 0;
sblock.fs_state = 0;
1995-04-13 01:24:31 +04:00
sblock.fs_clean = FS_ISCLEAN;
1993-03-21 12:45:37 +03:00
sblock.fs_ronly = 0;
sblock.fs_id[0] = (long)tv.tv_sec; /* XXXfvdl huh? */
2003-09-04 19:31:58 +04:00
sblock.fs_id[1] = arc4random() & INT32_MAX;
sblock.fs_fsmnt[0] = '\0';
csfrags = howmany(sblock.fs_cssize, sblock.fs_fsize);
sblock.fs_dsize = sblock.fs_size - sblock.fs_sblkno -
sblock.fs_ncg * (sblock.fs_dblkno - sblock.fs_sblkno);
sblock.fs_cstotal.cs_nbfree =
fragstoblks(&sblock, sblock.fs_dsize) -
howmany(csfrags, sblock.fs_frag);
sblock.fs_cstotal.cs_nffree =
fragnum(&sblock, sblock.fs_size) +
(fragnum(&sblock, csfrags) > 0 ?
sblock.fs_frag - fragnum(&sblock, csfrags) : 0);
sblock.fs_cstotal.cs_nifree = sblock.fs_ncg * sblock.fs_ipg - ROOTINO;
sblock.fs_cstotal.cs_ndir = 0;
sblock.fs_dsize -= csfrags;
sblock.fs_time = tv.tv_sec;
if (Oflag <= 1) {
sblock.fs_old_time = tv.tv_sec;
sblock.fs_old_dsize = sblock.fs_dsize;
sblock.fs_old_csaddr = sblock.fs_csaddr;
sblock.fs_old_cstotal.cs_ndir = sblock.fs_cstotal.cs_ndir;
sblock.fs_old_cstotal.cs_nbfree = sblock.fs_cstotal.cs_nbfree;
sblock.fs_old_cstotal.cs_nifree = sblock.fs_cstotal.cs_nifree;
sblock.fs_old_cstotal.cs_nffree = sblock.fs_cstotal.cs_nffree;
}
1993-03-21 12:45:37 +03:00
/*
* Dump out summary information about file system.
*/
if (!mfs || Nflag) {
#define B2MBFACTOR (1 / (1024.0 * 1024.0))
printf("%s: %.1fMB (%lld sectors) block size %d, "
"fragment size %d\n",
fsys, (float)sblock.fs_size * sblock.fs_fsize * B2MBFACTOR,
(long long)fsbtodb(&sblock, sblock.fs_size),
sblock.fs_bsize, sblock.fs_fsize);
printf("\tusing %d cylinder groups of %.2fMB, %d blks, "
"%d inodes.\n",
sblock.fs_ncg,
(float)sblock.fs_fpg * sblock.fs_fsize * B2MBFACTOR,
sblock.fs_fpg / sblock.fs_frag, sblock.fs_ipg);
#undef B2MBFACTOR
1993-03-21 12:45:37 +03:00
}
/*
* Now determine how wide each column will be, and calculate how
* many columns will fit in a 80 char line.
*/
printcolwidth = count_digits(
fsbtodb(&sblock, cgsblock(&sblock, sblock.fs_ncg -1)));
nprintcols = 80 / (printcolwidth + 2);
1993-03-21 12:45:37 +03:00
/*
* allocate space for superblock, cylinder group map, and
* two sets of inode blocks.
1993-03-21 12:45:37 +03:00
*/
if (sblock.fs_bsize < SBLOCKSIZE)
iobufsize = SBLOCKSIZE + 3 * sblock.fs_bsize;
else
iobufsize = 4 * sblock.fs_bsize;
iobuf_memsize = iobufsize;
if (!mfs && sblock.fs_magic == FS_UFS1_MAGIC) {
/* A larger buffer so we can write multiple inode blks */
iobuf_memsize += 14 * sblock.fs_bsize;
}
for (;;) {
iobuf = mmap(0, iobuf_memsize, PROT_READ|PROT_WRITE,
MAP_ANON|MAP_PRIVATE, -1, 0);
if (iobuf != NULL)
break;
if (iobuf_memsize != iobufsize) {
/* Try again with the smaller size */
iobuf_memsize = iobufsize;
continue;
}
printf("Cannot allocate I/O buffer\n");
exit(38);
}
memset(iobuf, 0, iobuf_memsize);
/*
* We now start writing to the filesystem
*/
/*
* Validate the given file system size.
* Verify that its last block can actually be accessed.
* Convert to file system fragment sized units.
*/
if (fssize <= 0) {
printf("preposterous size %lld\n", (long long)fssize);
exit(13);
}
wtfs(fssize - 1, sectorsize, iobuf);
/*
* Ensure there is nothing that looks like a filesystem
* superbock anywhere other than where ours will be.
* If fsck finds the wrong one all hell breaks loose!
*/
for (i = 0; ; i++) {
static const int sblocklist[] = SBLOCKSEARCH;
int sblkoff = sblocklist[i];
int sz;
if (sblkoff == -1)
break;
/* Remove main superblock */
zap_old_sblock(sblkoff);
/* and all possible locations for the first alternate */
sblkoff += SBLOCKSIZE;
for (sz = SBLOCKSIZE; sz <= 0x10000; sz <<= 1)
zap_old_sblock(roundup(sblkoff, sz));
}
if (isappleufs) {
struct appleufslabel appleufs;
ffs_appleufs_set(&appleufs, appleufs_volname, tv.tv_sec, 0);
wtfs(APPLEUFS_LABEL_OFFSET/sectorsize, APPLEUFS_LABEL_SIZE,
&appleufs);
} else {
struct appleufslabel appleufs;
/* Look for and zap any existing valid apple ufs labels */
rdfs(APPLEUFS_LABEL_OFFSET/sectorsize, APPLEUFS_LABEL_SIZE,
&appleufs);
if (ffs_appleufs_validate(fsys, &appleufs, NULL) == 0) {
memset(&appleufs, 0, sizeof(appleufs));
wtfs(APPLEUFS_LABEL_OFFSET/sectorsize, APPLEUFS_LABEL_SIZE,
&appleufs);
}
}
/*
* Make a copy of the superblock into the buffer that we will be
* writing out in each cylinder group.
*/
memcpy(iobuf, &sblock, sizeof sblock);
if (needswap)
ffs_sb_swap(&sblock, (struct fs *)iobuf);
if ((sblock.fs_old_flags & FS_FLAGS_UPDATED) == 0)
memset(iobuf + offsetof(struct fs, fs_old_postbl_start),
0xff, 256);
if (!mfs || Nflag)
1993-03-21 12:45:37 +03:00
printf("super-block backups (for fsck -b #) at:");
for (cylno = 0; cylno < sblock.fs_ncg; cylno++) {
initcg(cylno, &tv);
if (mfs && !Nflag)
1993-03-21 12:45:37 +03:00
continue;
if (cylno % nprintcols == 0)
1993-03-21 12:45:37 +03:00
printf("\n");
printf(" %*lld,", printcolwidth,
(long long)fsbtodb(&sblock, cgsblock(&sblock, cylno)));
fflush(stdout);
1993-03-21 12:45:37 +03:00
}
if (!mfs || Nflag)
1993-03-21 12:45:37 +03:00
printf("\n");
if (Nflag)
1993-03-21 12:45:37 +03:00
exit(0);
1993-03-21 12:45:37 +03:00
/*
* Now construct the initial file system,
*/
if (fsinit(&tv, mfsmode, mfsuid, mfsgid) == 0 && mfs)
errx(1, "Error making filesystem");
sblock.fs_time = tv.tv_sec;
if (Oflag <= 1) {
sblock.fs_old_cstotal.cs_ndir = sblock.fs_cstotal.cs_ndir;
sblock.fs_old_cstotal.cs_nbfree = sblock.fs_cstotal.cs_nbfree;
sblock.fs_old_cstotal.cs_nifree = sblock.fs_cstotal.cs_nifree;
sblock.fs_old_cstotal.cs_nffree = sblock.fs_cstotal.cs_nffree;
}
/*
* Write out the super-block and zeros until the first cg info
*/
i = cgsblock(&sblock, 0) * sblock.fs_fsize - sblock.fs_sblockloc,
memset(iobuf, 0, i);
memcpy(iobuf, &sblock, sizeof sblock);
if (needswap)
ffs_sb_swap(&sblock, (struct fs *)iobuf);
if ((sblock.fs_old_flags & FS_FLAGS_UPDATED) == 0)
memset(iobuf + offsetof(struct fs, fs_old_postbl_start),
0xff, 256);
wtfs(sblock.fs_sblockloc / sectorsize, i, iobuf);
/* Write out first and last cylinder summary sectors */
if (needswap)
ffs_csum_swap(fscs_0, fscs_0, sblock.fs_fsize);
wtfs(fsbtodb(&sblock, sblock.fs_csaddr), sblock.fs_fsize, fscs_0);
if (fscs_next > fscs_reset) {
if (needswap)
ffs_csum_swap(fscs_reset, fscs_reset, sblock.fs_fsize);
fs_csaddr++;
wtfs(fsbtodb(&sblock, fs_csaddr), sblock.fs_fsize, fscs_reset);
}
/* mfs doesn't need these permanently allocated */
munmap(iobuf, iobuf_memsize);
munmap(fscs_0, 2 * sblock.fs_fsize);
1993-03-21 12:45:37 +03:00
/*
* Update information about this partion in pack
* label, to that it may be updated on disk.
*/
if (pp == NULL)
return;
if (isappleufs)
pp->p_fstype = FS_APPLEUFS;
else
pp->p_fstype = FS_BSDFFS;
1993-03-21 12:45:37 +03:00
pp->p_fsize = sblock.fs_fsize;
pp->p_frag = sblock.fs_frag;
pp->p_cpg = sblock.fs_fpg;
1993-03-21 12:45:37 +03:00
}
/*
* Initialize a cylinder group.
*/
1997-07-01 02:20:30 +04:00
void
initcg(int cylno, const struct timeval *tv)
1993-03-21 12:45:37 +03:00
{
daddr_t cbase, dmax;
int32_t i, d, dlower, dupper, blkno;
struct ufs1_dinode *dp1;
struct ufs2_dinode *dp2;
int start;
1993-03-21 12:45:37 +03:00
/*
* Determine block bounds for cylinder group.
* Allow space for super block summary information in first
* cylinder group.
*/
cbase = cgbase(&sblock, cylno);
dmax = cbase + sblock.fs_fpg;
if (dmax > sblock.fs_size)
dmax = sblock.fs_size;
dlower = cgsblock(&sblock, cylno) - cbase;
dupper = cgdmin(&sblock, cylno) - cbase;
if (cylno == 0) {
1993-03-21 12:45:37 +03:00
dupper += howmany(sblock.fs_cssize, sblock.fs_fsize);
if (dupper >= cgstart(&sblock, cylno + 1)) {
printf("\rToo many cylinder groups to fit summary "
"information into first cylinder group\n");
exit(40);
}
}
memset(&acg, 0, sblock.fs_cgsize);
1993-03-21 12:45:37 +03:00
acg.cg_magic = CG_MAGIC;
acg.cg_cgx = cylno;
acg.cg_ndblk = dmax - cbase;
if (sblock.fs_contigsumsize > 0)
acg.cg_nclusterblks = acg.cg_ndblk >> sblock.fs_fragshift;
start = &acg.cg_space[0] - (u_char *)(&acg.cg_firstfield);
if (Oflag == 2) {
acg.cg_time = tv->tv_sec;
acg.cg_niblk = sblock.fs_ipg;
acg.cg_initediblk = sblock.fs_ipg < 2 * INOPB(&sblock) ?
sblock.fs_ipg : 2 * INOPB(&sblock);
acg.cg_iusedoff = start;
} else {
acg.cg_old_ncyl = sblock.fs_old_cpg;
if ((sblock.fs_old_flags & FS_FLAGS_UPDATED) == 0 &&
(cylno == sblock.fs_ncg - 1))
acg.cg_old_ncyl =
sblock.fs_old_ncyl % sblock.fs_old_cpg;
acg.cg_old_time = tv->tv_sec;
acg.cg_old_niblk = sblock.fs_ipg;
acg.cg_old_btotoff = start;
acg.cg_old_boff = acg.cg_old_btotoff +
sblock.fs_old_cpg * sizeof(int32_t);
acg.cg_iusedoff = acg.cg_old_boff +
sblock.fs_old_cpg * sizeof(u_int16_t);
}
acg.cg_freeoff = acg.cg_iusedoff + howmany(sblock.fs_ipg, CHAR_BIT);
if (sblock.fs_contigsumsize <= 0) {
acg.cg_nextfreeoff = acg.cg_freeoff +
howmany(sblock.fs_fpg, CHAR_BIT);
} else {
acg.cg_clustersumoff = acg.cg_freeoff +
howmany(sblock.fs_fpg, CHAR_BIT) - sizeof(int32_t);
if (isappleufs) {
/* Apple PR2216969 gives rationale for this change.
* I believe they were mistaken, but we need to
2003-02-14 19:21:47 +03:00
* duplicate it for compatibility. -- dbj@NetBSD.org
*/
acg.cg_clustersumoff += sizeof(int32_t);
}
acg.cg_clustersumoff =
roundup(acg.cg_clustersumoff, sizeof(int32_t));
acg.cg_clusteroff = acg.cg_clustersumoff +
(sblock.fs_contigsumsize + 1) * sizeof(int32_t);
acg.cg_nextfreeoff = acg.cg_clusteroff +
howmany(fragstoblks(&sblock, sblock.fs_fpg), CHAR_BIT);
}
if (acg.cg_nextfreeoff > sblock.fs_cgsize) {
printf("Panic: cylinder group too big\n");
exit(37);
1993-03-21 12:45:37 +03:00
}
acg.cg_cs.cs_nifree += sblock.fs_ipg;
if (cylno == 0)
for (i = 0; i < ROOTINO; i++) {
setbit(cg_inosused(&acg, 0), i);
1993-03-21 12:45:37 +03:00
acg.cg_cs.cs_nifree--;
}
if (cylno > 0) {
/*
* In cylno 0, beginning space is reserved
* for boot and super blocks.
*/
for (d = 0, blkno = 0; d < dlower;) {
setblock(&sblock, cg_blksfree(&acg, 0), blkno);
if (sblock.fs_contigsumsize > 0)
setbit(cg_clustersfree(&acg, 0), blkno);
1993-03-21 12:45:37 +03:00
acg.cg_cs.cs_nbfree++;
if (Oflag <= 1) {
int cn = old_cbtocylno(&sblock, d);
old_cg_blktot(&acg, 0)[cn]++;
old_cg_blks(&sblock, &acg,
cn, 0)[old_cbtorpos(&sblock, d)]++;
}
2002-04-10 21:28:13 +04:00
d += sblock.fs_frag;
blkno++;
1993-03-21 12:45:37 +03:00
}
}
if ((i = (dupper & (sblock.fs_frag - 1))) != 0) {
1993-03-21 12:45:37 +03:00
acg.cg_frsum[sblock.fs_frag - i]++;
for (d = dupper + sblock.fs_frag - i; dupper < d; dupper++) {
setbit(cg_blksfree(&acg, 0), dupper);
1993-03-21 12:45:37 +03:00
acg.cg_cs.cs_nffree++;
}
}
2002-04-10 21:28:13 +04:00
for (d = dupper, blkno = dupper >> sblock.fs_fragshift;
d + sblock.fs_frag <= acg.cg_ndblk; ) {
setblock(&sblock, cg_blksfree(&acg, 0), blkno);
if (sblock.fs_contigsumsize > 0)
setbit(cg_clustersfree(&acg, 0), blkno);
1993-03-21 12:45:37 +03:00
acg.cg_cs.cs_nbfree++;
if (Oflag <= 1) {
int cn = old_cbtocylno(&sblock, d);
old_cg_blktot(&acg, 0)[cn]++;
old_cg_blks(&sblock, &acg,
cn, 0)[old_cbtorpos(&sblock, d)]++;
}
1993-03-21 12:45:37 +03:00
d += sblock.fs_frag;
2002-04-10 21:28:13 +04:00
blkno++;
1993-03-21 12:45:37 +03:00
}
if (d < acg.cg_ndblk) {
acg.cg_frsum[acg.cg_ndblk - d]++;
for (; d < acg.cg_ndblk; d++) {
setbit(cg_blksfree(&acg, 0), d);
1993-03-21 12:45:37 +03:00
acg.cg_cs.cs_nffree++;
}
}
if (sblock.fs_contigsumsize > 0) {
int32_t *sump = cg_clustersum(&acg, 0);
u_char *mapp = cg_clustersfree(&acg, 0);
int map = *mapp++;
int bit = 1;
int run = 0;
for (i = 0; i < acg.cg_nclusterblks; i++) {
if ((map & bit) != 0) {
run++;
} else if (run != 0) {
if (run > sblock.fs_contigsumsize)
run = sblock.fs_contigsumsize;
sump[run]++;
run = 0;
}
if ((i & (CHAR_BIT - 1)) != (CHAR_BIT - 1)) {
bit <<= 1;
} else {
map = *mapp++;
bit = 1;
}
}
if (run != 0) {
if (run > sblock.fs_contigsumsize)
run = sblock.fs_contigsumsize;
sump[run]++;
}
}
*fscs_next++ = acg.cg_cs;
if (fscs_next == fscs_end) {
/* write block of cylinder group summary info into cyl 0 */
if (needswap)
ffs_csum_swap(fscs_reset, fscs_reset, sblock.fs_fsize);
fs_csaddr++;
wtfs(fsbtodb(&sblock, fs_csaddr), sblock.fs_fsize, fscs_reset);
fscs_next = fscs_reset;
memset(fscs_next, 0, sblock.fs_fsize);
}
/*
* Write out the duplicate super block, the cylinder group map
* and two blocks worth of inodes in a single write.
*/
start = sblock.fs_bsize > SBLOCKSIZE ? sblock.fs_bsize : SBLOCKSIZE;
memcpy(&iobuf[start], &acg, sblock.fs_cgsize);
if (needswap)
ffs_cg_swap(&acg, (struct cg*)&iobuf[start], &sblock);
start += sblock.fs_bsize;
dp1 = (struct ufs1_dinode *)(&iobuf[start]);
dp2 = (struct ufs2_dinode *)(&iobuf[start]);
for (i = MIN(sblock.fs_ipg, 2) * INOPB(&sblock); i != 0; i--) {
if (sblock.fs_magic == FS_UFS1_MAGIC) {
/* No need to swap, it'll stay random */
2003-09-04 19:31:58 +04:00
dp1->di_gen = arc4random() & INT32_MAX;
dp1++;
} else {
2003-09-04 19:31:58 +04:00
dp2->di_gen = arc4random() & INT32_MAX;
dp2++;
}
}
wtfs(fsbtodb(&sblock, cgsblock(&sblock, cylno)), iobufsize, iobuf);
/*
* For the old file system, we have to initialize all the inodes.
*/
if (sblock.fs_magic != FS_UFS1_MAGIC)
return;
/* Write 'd' (usually 16 * fs_frag) file-system fragments at once */
d = (iobuf_memsize - start) / sblock.fs_bsize * sblock.fs_frag;
dupper = sblock.fs_ipg / INOPF(&sblock);
for (i = 2 * sblock.fs_frag; i < dupper; i += d) {
if (d > dupper - i)
d = dupper - i;
dp1 = (struct ufs1_dinode *)(&iobuf[start]);
do
dp1->di_gen = arc4random() & INT32_MAX;
while ((char *)++dp1 < &iobuf[iobuf_memsize]);
wtfs(fsbtodb(&sblock, cgimin(&sblock, cylno) + i),
d * sblock.fs_bsize / sblock.fs_frag, &iobuf[start]);
}
1993-03-21 12:45:37 +03:00
}
/*
* initialize the file system
*/
#ifdef LOSTDIR
#define PREDEFDIR 3
1993-03-21 12:45:37 +03:00
#else
#define PREDEFDIR 2
1993-03-21 12:45:37 +03:00
#endif
struct direct root_dir[] = {
{ ROOTINO, sizeof(struct direct), DT_DIR, 1, "." },
{ ROOTINO, sizeof(struct direct), DT_DIR, 2, ".." },
#ifdef LOSTDIR
{ LOSTFOUNDINO, sizeof(struct direct), DT_DIR, 10, "lost+found" },
#endif
};
struct odirect {
u_int32_t d_ino;
u_int16_t d_reclen;
u_int16_t d_namlen;
u_char d_name[MAXNAMLEN + 1];
} oroot_dir[] = {
1993-03-21 12:45:37 +03:00
{ ROOTINO, sizeof(struct direct), 1, "." },
{ ROOTINO, sizeof(struct direct), 2, ".." },
#ifdef LOSTDIR
{ LOSTFOUNDINO, sizeof(struct direct), 10, "lost+found" },
#endif
};
#ifdef LOSTDIR
struct direct lost_found_dir[] = {
{ LOSTFOUNDINO, sizeof(struct direct), DT_DIR, 1, "." },
{ ROOTINO, sizeof(struct direct), DT_DIR, 2, ".." },
{ 0, DIRBLKSIZ, 0, 0, 0 },
};
struct odirect olost_found_dir[] = {
1993-03-21 12:45:37 +03:00
{ LOSTFOUNDINO, sizeof(struct direct), 1, "." },
{ ROOTINO, sizeof(struct direct), 2, ".." },
{ 0, DIRBLKSIZ, 0, 0 },
};
#endif
char buf[MAXBSIZE];
2000-12-01 14:52:54 +03:00
static void copy_dir(struct direct *, struct direct *);
1993-03-21 12:45:37 +03:00
int
fsinit(const struct timeval *tv, mode_t mfsmode, uid_t mfsuid, gid_t mfsgid)
1993-03-21 12:45:37 +03:00
{
union dinode node;
1997-07-01 02:20:30 +04:00
#ifdef LOSTDIR
1993-03-21 12:45:37 +03:00
int i;
int dirblksiz = DIRBLKSIZ;
if (isappleufs)
dirblksiz = APPLEUFS_DIRBLKSIZ;
1997-07-01 02:20:30 +04:00
#endif
1993-03-21 12:45:37 +03:00
/*
* initialize the node
*/
1993-03-21 12:45:37 +03:00
#ifdef LOSTDIR
/*
* create the lost+found directory
*/
memset(&node, 0, sizeof(node));
if (Oflag == 0) {
(void)makedir((struct direct *)olost_found_dir, 2);
for (i = dirblksiz; i < sblock.fs_bsize; i += dirblksiz)
copy_dir((struct direct*)&olost_found_dir[2],
(struct direct*)&buf[i]);
} else {
(void)makedir(lost_found_dir, 2);
for (i = dirblksiz; i < sblock.fs_bsize; i += dirblksiz)
copy_dir(&lost_found_dir[2], (struct direct*)&buf[i]);
}
if (sblock.fs_magic == FS_UFS1_MAGIC) {
node.dp1.di_atime = tv->tv_sec;
node.dp1.di_atimensec = tv->tv_usec * 1000;
node.dp1.di_mtime = tv->tv_sec;
node.dp1.di_mtimensec = tv->tv_usec * 1000;
node.dp1.di_ctime = tv->tv_sec;
node.dp1.di_ctimensec = tv->tv_usec * 1000;
node.dp1.di_mode = IFDIR | UMASK;
node.dp1.di_nlink = 2;
node.dp1.di_size = sblock.fs_bsize;
node.dp1.di_db[0] = alloc(node.dp1.di_size, node.dp1.di_mode);
if (node.dp1.di_db[0] == 0)
return (0);
node.dp1.di_blocks = btodb(fragroundup(&sblock,
node.dp1.di_size));
node.dp1.di_uid = geteuid();
node.dp1.di_gid = getegid();
wtfs(fsbtodb(&sblock, node.dp1.di_db[0]), node.dp1.di_size,
buf);
} else {
node.dp2.di_atime = tv->tv_sec;
node.dp2.di_atimensec = tv->tv_usec * 1000;
node.dp2.di_mtime = tv->tv_sec;
node.dp2.di_mtimensec = tv->tv_usec * 1000;
node.dp2.di_ctime = tv->tv_sec;
node.dp2.di_ctimensec = tv->tv_usec * 1000;
node.dp2.di_birthtime = tv->tv_sec;
node.dp2.di_birthnsec = tv->tv_usec * 1000;
node.dp2.di_mode = IFDIR | UMASK;
node.dp2.di_nlink = 2;
node.dp2.di_size = sblock.fs_bsize;
node.dp2.di_db[0] = alloc(node.dp2.di_size, node.dp2.di_mode);
if (node.dp2.di_db[0] == 0)
return (0);
node.dp2.di_blocks = btodb(fragroundup(&sblock,
node.dp2.di_size));
node.dp2.di_uid = geteuid();
node.dp2.di_gid = getegid();
wtfs(fsbtodb(&sblock, node.dp2.di_db[0]), node.dp2.di_size,
buf);
}
1993-03-21 12:45:37 +03:00
iput(&node, LOSTFOUNDINO);
#endif
/*
* create the root directory
*/
memset(&node, 0, sizeof(node));
if (Oflag <= 1) {
if (mfs) {
node.dp1.di_mode = IFDIR | mfsmode;
node.dp1.di_uid = mfsuid;
node.dp1.di_gid = mfsgid;
} else {
node.dp1.di_mode = IFDIR | UMASK;
node.dp1.di_uid = geteuid();
node.dp1.di_gid = getegid();
}
node.dp1.di_nlink = PREDEFDIR;
if (Oflag == 0)
node.dp1.di_size = makedir((struct direct *)oroot_dir,
PREDEFDIR);
else
node.dp1.di_size = makedir(root_dir, PREDEFDIR);
node.dp1.di_db[0] = alloc(sblock.fs_fsize, node.dp1.di_mode);
if (node.dp1.di_db[0] == 0)
return (0);
node.dp1.di_blocks = btodb(fragroundup(&sblock,
node.dp1.di_size));
wtfs(fsbtodb(&sblock, node.dp1.di_db[0]), sblock.fs_fsize, buf);
} else {
if (mfs) {
node.dp2.di_mode = IFDIR | mfsmode;
node.dp2.di_uid = mfsuid;
node.dp2.di_gid = mfsgid;
} else {
node.dp2.di_mode = IFDIR | UMASK;
node.dp2.di_uid = geteuid();
node.dp2.di_gid = getegid();
}
node.dp2.di_atime = tv->tv_sec;
node.dp2.di_atimensec = tv->tv_usec * 1000;
node.dp2.di_mtime = tv->tv_sec;
node.dp2.di_mtimensec = tv->tv_usec * 1000;
node.dp2.di_ctime = tv->tv_sec;
node.dp2.di_ctimensec = tv->tv_usec * 1000;
node.dp2.di_birthtime = tv->tv_sec;
node.dp2.di_birthnsec = tv->tv_usec * 1000;
node.dp2.di_nlink = PREDEFDIR;
node.dp2.di_size = makedir(root_dir, PREDEFDIR);
node.dp2.di_db[0] = alloc(sblock.fs_fsize, node.dp2.di_mode);
if (node.dp2.di_db[0] == 0)
return (0);
node.dp2.di_blocks = btodb(fragroundup(&sblock,
node.dp2.di_size));
wtfs(fsbtodb(&sblock, node.dp2.di_db[0]), sblock.fs_fsize, buf);
}
1993-03-21 12:45:37 +03:00
iput(&node, ROOTINO);
return (1);
1993-03-21 12:45:37 +03:00
}
/*
* construct a set of directory entries in "buf".
* return size of directory.
*/
1997-07-01 02:20:30 +04:00
int
2000-12-01 14:52:54 +03:00
makedir(struct direct *protodir, int entries)
1993-03-21 12:45:37 +03:00
{
char *cp;
int i, spcleft;
int dirblksiz = DIRBLKSIZ;
if (isappleufs)
dirblksiz = APPLEUFS_DIRBLKSIZ;
1993-03-21 12:45:37 +03:00
memset(buf, 0, DIRBLKSIZ);
spcleft = dirblksiz;
1993-03-21 12:45:37 +03:00
for (cp = buf, i = 0; i < entries - 1; i++) {
protodir[i].d_reclen = DIRSIZ(Oflag == 0, &protodir[i], 0);
copy_dir(&protodir[i], (struct direct*)cp);
1993-03-21 12:45:37 +03:00
cp += protodir[i].d_reclen;
spcleft -= protodir[i].d_reclen;
}
protodir[i].d_reclen = spcleft;
copy_dir(&protodir[i], (struct direct*)cp);
return (dirblksiz);
1993-03-21 12:45:37 +03:00
}
/*
* allocate a block or frag
*/
daddr_t
2000-12-01 14:52:54 +03:00
alloc(int size, int mode)
1993-03-21 12:45:37 +03:00
{
int i, frag;
daddr_t d, blkno;
1993-03-21 12:45:37 +03:00
1997-07-01 02:20:30 +04:00
rdfs(fsbtodb(&sblock, cgtod(&sblock, 0)), sblock.fs_cgsize, &acg);
/* fs -> host byte order */
if (needswap)
ffs_cg_swap(&acg, &acg, &sblock);
1993-03-21 12:45:37 +03:00
if (acg.cg_magic != CG_MAGIC) {
printf("cg 0: bad magic number\n");
return (0);
}
if (acg.cg_cs.cs_nbfree == 0) {
printf("first cylinder group ran out of space\n");
return (0);
}
for (d = 0; d < acg.cg_ndblk; d += sblock.fs_frag)
if (isblock(&sblock, cg_blksfree(&acg, 0),
d >> sblock.fs_fragshift))
1993-03-21 12:45:37 +03:00
goto goth;
printf("internal error: can't find block in cyl 0\n");
return (0);
goth:
blkno = fragstoblks(&sblock, d);
clrblock(&sblock, cg_blksfree(&acg, 0), blkno);
if (sblock.fs_contigsumsize > 0)
clrbit(cg_clustersfree(&acg, 0), blkno);
1993-03-21 12:45:37 +03:00
acg.cg_cs.cs_nbfree--;
sblock.fs_cstotal.cs_nbfree--;
fscs_0->cs_nbfree--;
1993-03-21 12:45:37 +03:00
if (mode & IFDIR) {
acg.cg_cs.cs_ndir++;
sblock.fs_cstotal.cs_ndir++;
fscs_0->cs_ndir++;
1993-03-21 12:45:37 +03:00
}
if (Oflag <= 1) {
int cn = old_cbtocylno(&sblock, d);
old_cg_blktot(&acg, 0)[cn]--;
old_cg_blks(&sblock, &acg,
cn, 0)[old_cbtorpos(&sblock, d)]--;
}
1993-03-21 12:45:37 +03:00
if (size != sblock.fs_bsize) {
frag = howmany(size, sblock.fs_fsize);
fscs_0->cs_nffree += sblock.fs_frag - frag;
1993-03-21 12:45:37 +03:00
sblock.fs_cstotal.cs_nffree += sblock.fs_frag - frag;
acg.cg_cs.cs_nffree += sblock.fs_frag - frag;
acg.cg_frsum[sblock.fs_frag - frag]++;
for (i = frag; i < sblock.fs_frag; i++)
setbit(cg_blksfree(&acg, 0), d + i);
1993-03-21 12:45:37 +03:00
}
/* host -> fs byte order */
if (needswap)
ffs_cg_swap(&acg, &acg, &sblock);
wtfs(fsbtodb(&sblock, cgtod(&sblock, 0)), sblock.fs_cgsize, &acg);
1993-03-21 12:45:37 +03:00
return (d);
}
/*
* Allocate an inode on the disk
*/
1997-07-01 02:20:30 +04:00
static void
iput(union dinode *ip, ino_t ino)
1993-03-21 12:45:37 +03:00
{
daddr_t d;
int c, i;
struct ufs1_dinode *dp1;
struct ufs2_dinode *dp2;
1993-03-21 12:45:37 +03:00
c = ino_to_cg(&sblock, ino);
1997-07-01 02:20:30 +04:00
rdfs(fsbtodb(&sblock, cgtod(&sblock, 0)), sblock.fs_cgsize, &acg);
/* fs -> host byte order */
if (needswap)
ffs_cg_swap(&acg, &acg, &sblock);
1993-03-21 12:45:37 +03:00
if (acg.cg_magic != CG_MAGIC) {
printf("cg 0: bad magic number\n");
exit(31);
}
acg.cg_cs.cs_nifree--;
setbit(cg_inosused(&acg, 0), ino);
/* host -> fs byte order */
if (needswap)
ffs_cg_swap(&acg, &acg, &sblock);
wtfs(fsbtodb(&sblock, cgtod(&sblock, 0)), sblock.fs_cgsize, &acg);
1993-03-21 12:45:37 +03:00
sblock.fs_cstotal.cs_nifree--;
fscs_0->cs_nifree--;
1993-03-21 12:45:37 +03:00
if (ino >= sblock.fs_ipg * sblock.fs_ncg) {
printf("fsinit: inode value out of range (%d).\n", ino);
exit(32);
}
d = fsbtodb(&sblock, ino_to_fsba(&sblock, ino));
rdfs(d, sblock.fs_bsize, (char *)iobuf);
if (sblock.fs_magic == FS_UFS1_MAGIC) {
dp1 = (struct ufs1_dinode *)iobuf;
dp1 += ino_to_fsbo(&sblock, ino);
if (needswap) {
ffs_dinode1_swap(&ip->dp1, dp1);
/* ffs_dinode1_swap() doesn't swap blocks addrs */
for (i=0; i<NDADDR + NIADDR; i++)
dp1->di_db[i] = bswap32(ip->dp1.di_db[i]);
} else
*dp1 = ip->dp1;
2003-09-06 16:42:00 +04:00
dp1->di_gen = arc4random() & INT32_MAX;
} else {
dp2 = (struct ufs2_dinode *)iobuf;
dp2 += ino_to_fsbo(&sblock, ino);
if (needswap) {
ffs_dinode2_swap(&ip->dp2, dp2);
for (i=0; i<NDADDR + NIADDR; i++)
dp2->di_db[i] = bswap64(ip->dp2.di_db[i]);
} else
*dp2 = ip->dp2;
2003-09-06 16:42:00 +04:00
dp2->di_gen = arc4random() & INT32_MAX;
}
wtfs(d, sblock.fs_bsize, iobuf);
1993-03-21 12:45:37 +03:00
}
/*
* read a block from the file system
*/
1997-07-01 02:20:30 +04:00
void
2000-12-01 14:52:54 +03:00
rdfs(daddr_t bno, int size, void *bf)
1993-03-21 12:45:37 +03:00
{
int n;
off_t offset;
1993-03-21 12:45:37 +03:00
#ifdef MFS
1993-03-21 12:45:37 +03:00
if (mfs) {
if (Nflag)
memset(bf, 0, size);
else
memmove(bf, membase + bno * sectorsize, size);
1993-03-21 12:45:37 +03:00
return;
}
#endif
offset = bno;
n = pread(fsi, bf, size, offset * sectorsize);
if (n != size) {
printf("rdfs: read error for sector %lld: %s\n",
(long long)bno, strerror(errno));
1993-03-21 12:45:37 +03:00
exit(34);
}
}
/*
* write a block to the file system
*/
1997-07-01 02:20:30 +04:00
void
2000-12-01 14:52:54 +03:00
wtfs(daddr_t bno, int size, void *bf)
1993-03-21 12:45:37 +03:00
{
int n;
off_t offset;
1993-03-21 12:45:37 +03:00
if (Nflag)
return;
#ifdef MFS
1993-03-21 12:45:37 +03:00
if (mfs) {
memmove(membase + bno * sectorsize, bf, size);
1993-03-21 12:45:37 +03:00
return;
}
#endif
offset = bno;
n = pwrite(fso, bf, size, offset * sectorsize);
if (n != size) {
printf("wtfs: write error for sector %lld: %s\n",
(long long)bno, strerror(errno));
1993-03-21 12:45:37 +03:00
exit(36);
}
}
/*
* check if a block is available
*/
1997-07-01 02:20:30 +04:00
int
2000-12-01 14:52:54 +03:00
isblock(struct fs *fs, unsigned char *cp, int h)
1993-03-21 12:45:37 +03:00
{
unsigned char mask;
switch (fs->fs_fragshift) {
case 3:
1993-03-21 12:45:37 +03:00
return (cp[h] == 0xff);
case 2:
1993-03-21 12:45:37 +03:00
mask = 0x0f << ((h & 0x1) << 2);
return ((cp[h >> 1] & mask) == mask);
case 1:
1993-03-21 12:45:37 +03:00
mask = 0x03 << ((h & 0x3) << 1);
return ((cp[h >> 2] & mask) == mask);
case 0:
1993-03-21 12:45:37 +03:00
mask = 0x01 << (h & 0x7);
return ((cp[h >> 3] & mask) == mask);
default:
#ifdef STANDALONE
printf("isblock bad fs_fragshift %d\n", fs->fs_fragshift);
1993-03-21 12:45:37 +03:00
#else
fprintf(stderr, "isblock bad fs_fragshift %d\n",
fs->fs_fragshift);
1993-03-21 12:45:37 +03:00
#endif
return (0);
}
}
/*
* take a block out of the map
*/
1997-07-01 02:20:30 +04:00
void
2000-12-01 14:52:54 +03:00
clrblock(struct fs *fs, unsigned char *cp, int h)
1993-03-21 12:45:37 +03:00
{
switch ((fs)->fs_fragshift) {
case 3:
1993-03-21 12:45:37 +03:00
cp[h] = 0;
return;
case 2:
1993-03-21 12:45:37 +03:00
cp[h >> 1] &= ~(0x0f << ((h & 0x1) << 2));
return;
case 1:
1993-03-21 12:45:37 +03:00
cp[h >> 2] &= ~(0x03 << ((h & 0x3) << 1));
return;
case 0:
1993-03-21 12:45:37 +03:00
cp[h >> 3] &= ~(0x01 << (h & 0x7));
return;
default:
#ifdef STANDALONE
printf("clrblock bad fs_fragshift %d\n", fs->fs_fragshift);
1993-03-21 12:45:37 +03:00
#else
fprintf(stderr, "clrblock bad fs_fragshift %d\n",
fs->fs_fragshift);
1993-03-21 12:45:37 +03:00
#endif
return;
}
}
/*
* put a block into the map
*/
1997-07-01 02:20:30 +04:00
void
2000-12-01 14:52:54 +03:00
setblock(struct fs *fs, unsigned char *cp, int h)
1993-03-21 12:45:37 +03:00
{
switch (fs->fs_fragshift) {
case 3:
1993-03-21 12:45:37 +03:00
cp[h] = 0xff;
return;
case 2:
1993-03-21 12:45:37 +03:00
cp[h >> 1] |= (0x0f << ((h & 0x1) << 2));
return;
case 1:
1993-03-21 12:45:37 +03:00
cp[h >> 2] |= (0x03 << ((h & 0x3) << 1));
return;
case 0:
1993-03-21 12:45:37 +03:00
cp[h >> 3] |= (0x01 << (h & 0x7));
return;
default:
#ifdef STANDALONE
printf("setblock bad fs_frag %d\n", fs->fs_fragshift);
1993-03-21 12:45:37 +03:00
#else
fprintf(stderr, "setblock bad fs_fragshift %d\n",
fs->fs_fragshift);
1993-03-21 12:45:37 +03:00
#endif
return;
}
}
/* copy a direntry to a buffer, in fs byte order */
static void
2000-12-01 14:52:54 +03:00
copy_dir(struct direct *dir, struct direct *dbuf)
{
memcpy(dbuf, dir, DIRSIZ(Oflag == 0, dir, 0));
if (needswap) {
dbuf->d_ino = bswap32(dir->d_ino);
dbuf->d_reclen = bswap16(dir->d_reclen);
if (Oflag == 0)
((struct odirect*)dbuf)->d_namlen =
bswap16(((struct odirect*)dir)->d_namlen);
}
}
/* Determine how many digits are needed to print a given integer */
static int
count_digits(uint64_t num)
{
int ndig;
for (ndig = 1; num > 9; num /= 10, ndig++);
return (ndig);
}
static int
ilog2(int val)
{
u_int n;
for (n = 0; n < sizeof(n) * CHAR_BIT; n++)
if (1 << n == val)
return (n);
errx(1, "ilog2: %d is not a power of 2\n", val);
}
static void
zap_old_sblock(int sblkoff)
{
static int cg0_data;
uint32_t oldfs[SBLOCKSIZE / 4];
static const struct fsm {
uint32_t offset;
uint32_t magic;
uint32_t mask;
} fs_magics[] = {
{offsetof(struct fs, fs_magic)/4, FS_UFS1_MAGIC, ~0u},
{offsetof(struct fs, fs_magic)/4, FS_UFS2_MAGIC, ~0u},
{0, 0x70162, ~0u}, /* LFS_MAGIC */
{14, 0xef53, 0xffff}, /* EXT2FS (little) */
{14, 0xef530000, 0xffff0000}, /* EXT2FS (big) */
{~0u},
};
const struct fsm *fsm;
if (Nflag)
return;
if (sblkoff == 0) /* Why did UFS2 add support for this? sigh. */
return;
if (cg0_data == 0)
/* For FFSv1 this could include all the inodes. */
cg0_data = cgsblock(&sblock, 0) * sblock.fs_fsize + iobufsize;
/* Ignore anything that is beyond our filesystem */
if ((sblkoff + SBLOCKSIZE)/sectorsize >= fssize)
return;
/* Zero anything inside our filesystem... */
if (sblkoff >= sblock.fs_sblockloc) {
/* ...unless we will write that area anyway */
if (sblkoff >= cg0_data)
2003-09-18 01:09:18 +04:00
wtfs(sblkoff / sectorsize,
roundup(sizeof sblock, sectorsize), iobuf);
return;
}
/* The sector might contain boot code, so we must validate it */
rdfs(sblkoff/sectorsize, sizeof oldfs, &oldfs);
for (fsm = fs_magics; ; fsm++) {
uint32_t v;
if (fsm->mask == 0)
return;
v = oldfs[fsm->offset];
if ((v & fsm->mask) == fsm->magic ||
(bswap32(v) & fsm->mask) == fsm->magic)
break;
}
/* Just zap the magic number */
oldfs[fsm->offset] = 0;
wtfs(sblkoff/sectorsize, sizeof oldfs, &oldfs);
}
#ifdef MFS
/*
* XXX!
* Attempt to guess how much more space is available for process data. The
* heuristic we use is
*
* max_data_limit - (sbrk(0) - etext) - 128kB
*
* etext approximates that start address of the data segment, and the 128kB
* allows some slop for both segment gap between text and data, and for other
* (libc) malloc usage.
*/
static void
calc_memfree(void)
{
extern char etext;
struct rlimit rlp;
u_long base;
base = (u_long)sbrk(0) - (u_long)&etext;
if (getrlimit(RLIMIT_DATA, &rlp) < 0)
perror("getrlimit");
rlp.rlim_cur = rlp.rlim_max;
if (setrlimit(RLIMIT_DATA, &rlp) < 0)
perror("setrlimit");
memleft = rlp.rlim_max - base - (128 * 1024);
}
/*
* Internal version of malloc that trims the requested size if not enough
* memory is available.
*/
static void *
mkfs_malloc(size_t size)
{
u_long pgsz;
if (size == 0)
return (NULL);
if (memleft == 0)
calc_memfree();
pgsz = getpagesize() - 1;
size = (size + pgsz) &~ pgsz;
if (size > memleft)
size = memleft;
memleft -= size;
return (mmap(0, size, PROT_READ|PROT_WRITE, MAP_ANON|MAP_PRIVATE,
-1, 0));
}
#endif /* MFS */