Aren
/
NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
NetBSD/sys/arch/amiga/conf/DRACO

161 lines
4.7 KiB
Plaintext
Raw Normal View History

Eliminate obsolete TIMEZONE and DST options. Eliminate obsolete global kernel variable "struct timezone tz" Add RTC_OFFSET option Add global kernel variable rtc_offset, which is initialized by RTC_OFFSET at kernel compile time. on i386, x68k, mac68k, pc532 and arm32, RTC_OFFSET indicates how many minutes west (east) of GMT the hardware RTC runs. Defaults to 0. Places where tz variable was used to indicate this in the past have been replaced with rtc_offset. Add sysctl interface to rtc_offset. Kill obsolete DST_* macros in sys/time.h gettimeofday now always returns zeroed timezone if zone is requested. settimeofday now ignores and logs attempts to set non-existant kernel timezone.
1997-01-15 04:28:28 +03:00
# $NetBSD: DRACO,v 1.8 1997/01/15 01:28:33 perry Exp $
First part of M68060 and DraCo support. * for the M68060 part: store buffer and branch target cache aren't enabled yet (this needs cleanup of lots of locore.s code which is a maze of little passages, all a little different) (and it wasn't yet tested in an accellerated Amiga, only in the DraCo). I've included a workaround for 2 of the CPU bugs in chips with Masks 1F43G and earlier, but didn't bother to deal with the can of worms in the [0-3]D11W chips. Be sure to get "68060 rev. 1" or more reported at kernel startup time, or at least mention it (or the mask revision, if available) when reporting problems. * for the DraCo: only machines with a CIA timer. I assigned machine id 32000+nn (0x7Dnn), where n is the machine readable Quicklogic custom chip revision (also printed at boot time). "Guaranteed to work" up to rev. 3, newer DraCo's aren't guaranteed to have any CIA (we don't have a driver for the new timer yet). Supported are: - MF-II keyboards on the native interface and A3000 keyboards via the CIA. - builtin SCSI interface (yet another instance of siop) - CIA timer. - Zorro II devices which don't do DMA (don't get mapped to Zorro II address space in the DraCo) - "local bus" devices which are autoconfigured by the boot rom (should be all); only an Altais driver is there (looks like a Retina Z3) Not yet supported are: - native timer of newer machines. - Real Time Clock. - serial, parallel + floppy on the SuperIO chip (that is also: no mouse) XXX You need an enhanced boot loader, which will committed in a few days. XXX std.draco should and will go away.
1996-05-10 00:30:30 +04:00
#
Bring in changes from the 1.2 branch which where only in the release
1996-08-11 16:27:50 +04:00
# Macro System GmbH "DraCo", currently 68060-only until FPE is integrated.
First part of M68060 and DraCo support. * for the M68060 part: store buffer and branch target cache aren't enabled yet (this needs cleanup of lots of locore.s code which is a maze of little passages, all a little different) (and it wasn't yet tested in an accellerated Amiga, only in the DraCo). I've included a workaround for 2 of the CPU bugs in chips with Masks 1F43G and earlier, but didn't bother to deal with the can of worms in the [0-3]D11W chips. Be sure to get "68060 rev. 1" or more reported at kernel startup time, or at least mention it (or the mask revision, if available) when reporting problems. * for the DraCo: only machines with a CIA timer. I assigned machine id 32000+nn (0x7Dnn), where n is the machine readable Quicklogic custom chip revision (also printed at boot time). "Guaranteed to work" up to rev. 3, newer DraCo's aren't guaranteed to have any CIA (we don't have a driver for the new timer yet). Supported are: - MF-II keyboards on the native interface and A3000 keyboards via the CIA. - builtin SCSI interface (yet another instance of siop) - CIA timer. - Zorro II devices which don't do DMA (don't get mapped to Zorro II address space in the DraCo) - "local bus" devices which are autoconfigured by the boot rom (should be all); only an Altais driver is there (looks like a Retina Z3) Not yet supported are: - native timer of newer machines. - Real Time Clock. - serial, parallel + floppy on the SuperIO chip (that is also: no mouse) XXX You need an enhanced boot loader, which will committed in a few days. XXX std.draco should and will go away.
1996-05-10 00:30:30 +04:00
#
Bring in changes from the 1.2 branch which where only in the release
1996-08-11 16:27:50 +04:00
# this will be replace by std.amiga soon:
include update for config(8)
1996-10-21 15:11:23 +04:00
include "arch/amiga/conf/std.draco"
First part of M68060 and DraCo support. * for the M68060 part: store buffer and branch target cache aren't enabled yet (this needs cleanup of lots of locore.s code which is a maze of little passages, all a little different) (and it wasn't yet tested in an accellerated Amiga, only in the DraCo). I've included a workaround for 2 of the CPU bugs in chips with Masks 1F43G and earlier, but didn't bother to deal with the can of worms in the [0-3]D11W chips. Be sure to get "68060 rev. 1" or more reported at kernel startup time, or at least mention it (or the mask revision, if available) when reporting problems. * for the DraCo: only machines with a CIA timer. I assigned machine id 32000+nn (0x7Dnn), where n is the machine readable Quicklogic custom chip revision (also printed at boot time). "Guaranteed to work" up to rev. 3, newer DraCo's aren't guaranteed to have any CIA (we don't have a driver for the new timer yet). Supported are: - MF-II keyboards on the native interface and A3000 keyboards via the CIA. - builtin SCSI interface (yet another instance of siop) - CIA timer. - Zorro II devices which don't do DMA (don't get mapped to Zorro II address space in the DraCo) - "local bus" devices which are autoconfigured by the boot rom (should be all); only an Altais driver is there (looks like a Retina Z3) Not yet supported are: - native timer of newer machines. - Real Time Clock. - serial, parallel + floppy on the SuperIO chip (that is also: no mouse) XXX You need an enhanced boot loader, which will committed in a few days. XXX std.draco should and will go away.
1996-05-10 00:30:30 +04:00
maxusers 8
Eliminate obsolete TIMEZONE and DST options. Eliminate obsolete global kernel variable "struct timezone tz" Add RTC_OFFSET option Add global kernel variable rtc_offset, which is initialized by RTC_OFFSET at kernel compile time. on i386, x68k, mac68k, pc532 and arm32, RTC_OFFSET indicates how many minutes west (east) of GMT the hardware RTC runs. Defaults to 0. Places where tz variable was used to indicate this in the past have been replaced with rtc_offset. Add sysctl interface to rtc_offset. Kill obsolete DST_* macros in sys/time.h gettimeofday now always returns zeroed timezone if zone is requested. settimeofday now ignores and logs attempts to set non-existant kernel timezone.
1997-01-15 04:28:28 +03:00
options RTC_OFFSET=300
First part of M68060 and DraCo support. * for the M68060 part: store buffer and branch target cache aren't enabled yet (this needs cleanup of lots of locore.s code which is a maze of little passages, all a little different) (and it wasn't yet tested in an accellerated Amiga, only in the DraCo). I've included a workaround for 2 of the CPU bugs in chips with Masks 1F43G and earlier, but didn't bother to deal with the can of worms in the [0-3]D11W chips. Be sure to get "68060 rev. 1" or more reported at kernel startup time, or at least mention it (or the mask revision, if available) when reporting problems. * for the DraCo: only machines with a CIA timer. I assigned machine id 32000+nn (0x7Dnn), where n is the machine readable Quicklogic custom chip revision (also printed at boot time). "Guaranteed to work" up to rev. 3, newer DraCo's aren't guaranteed to have any CIA (we don't have a driver for the new timer yet). Supported are: - MF-II keyboards on the native interface and A3000 keyboards via the CIA. - builtin SCSI interface (yet another instance of siop) - CIA timer. - Zorro II devices which don't do DMA (don't get mapped to Zorro II address space in the DraCo) - "local bus" devices which are autoconfigured by the boot rom (should be all); only an Altais driver is there (looks like a Retina Z3) Not yet supported are: - native timer of newer machines. - Real Time Clock. - serial, parallel + floppy on the SuperIO chip (that is also: no mouse) XXX You need an enhanced boot loader, which will committed in a few days. XXX std.draco should and will go away.
1996-05-10 00:30:30 +04:00
Bring in changes from the 1.2 branch which where only in the release
1996-08-11 16:27:50 +04:00
#
First part of M68060 and DraCo support. * for the M68060 part: store buffer and branch target cache aren't enabled yet (this needs cleanup of lots of locore.s code which is a maze of little passages, all a little different) (and it wasn't yet tested in an accellerated Amiga, only in the DraCo). I've included a workaround for 2 of the CPU bugs in chips with Masks 1F43G and earlier, but didn't bother to deal with the can of worms in the [0-3]D11W chips. Be sure to get "68060 rev. 1" or more reported at kernel startup time, or at least mention it (or the mask revision, if available) when reporting problems. * for the DraCo: only machines with a CIA timer. I assigned machine id 32000+nn (0x7Dnn), where n is the machine readable Quicklogic custom chip revision (also printed at boot time). "Guaranteed to work" up to rev. 3, newer DraCo's aren't guaranteed to have any CIA (we don't have a driver for the new timer yet). Supported are: - MF-II keyboards on the native interface and A3000 keyboards via the CIA. - builtin SCSI interface (yet another instance of siop) - CIA timer. - Zorro II devices which don't do DMA (don't get mapped to Zorro II address space in the DraCo) - "local bus" devices which are autoconfigured by the boot rom (should be all); only an Altais driver is there (looks like a Retina Z3) Not yet supported are: - native timer of newer machines. - Real Time Clock. - serial, parallel + floppy on the SuperIO chip (that is also: no mouse) XXX You need an enhanced boot loader, which will committed in a few days. XXX std.draco should and will go away.
1996-05-10 00:30:30 +04:00
# mainboards to support (in addition to Amiga)
Bring in changes from the 1.2 branch which where only in the release
1996-08-11 16:27:50 +04:00
#
First part of M68060 and DraCo support. * for the M68060 part: store buffer and branch target cache aren't enabled yet (this needs cleanup of lots of locore.s code which is a maze of little passages, all a little different) (and it wasn't yet tested in an accellerated Amiga, only in the DraCo). I've included a workaround for 2 of the CPU bugs in chips with Masks 1F43G and earlier, but didn't bother to deal with the can of worms in the [0-3]D11W chips. Be sure to get "68060 rev. 1" or more reported at kernel startup time, or at least mention it (or the mask revision, if available) when reporting problems. * for the DraCo: only machines with a CIA timer. I assigned machine id 32000+nn (0x7Dnn), where n is the machine readable Quicklogic custom chip revision (also printed at boot time). "Guaranteed to work" up to rev. 3, newer DraCo's aren't guaranteed to have any CIA (we don't have a driver for the new timer yet). Supported are: - MF-II keyboards on the native interface and A3000 keyboards via the CIA. - builtin SCSI interface (yet another instance of siop) - CIA timer. - Zorro II devices which don't do DMA (don't get mapped to Zorro II address space in the DraCo) - "local bus" devices which are autoconfigured by the boot rom (should be all); only an Altais driver is there (looks like a Retina Z3) Not yet supported are: - native timer of newer machines. - Real Time Clock. - serial, parallel + floppy on the SuperIO chip (that is also: no mouse) XXX You need an enhanced boot loader, which will committed in a few days. XXX std.draco should and will go away.
1996-05-10 00:30:30 +04:00
options DRACO
Bring in changes from the 1.2 branch which where only in the release
1996-08-11 16:27:50 +04:00
First part of M68060 and DraCo support. * for the M68060 part: store buffer and branch target cache aren't enabled yet (this needs cleanup of lots of locore.s code which is a maze of little passages, all a little different) (and it wasn't yet tested in an accellerated Amiga, only in the DraCo). I've included a workaround for 2 of the CPU bugs in chips with Masks 1F43G and earlier, but didn't bother to deal with the can of worms in the [0-3]D11W chips. Be sure to get "68060 rev. 1" or more reported at kernel startup time, or at least mention it (or the mask revision, if available) when reporting problems. * for the DraCo: only machines with a CIA timer. I assigned machine id 32000+nn (0x7Dnn), where n is the machine readable Quicklogic custom chip revision (also printed at boot time). "Guaranteed to work" up to rev. 3, newer DraCo's aren't guaranteed to have any CIA (we don't have a driver for the new timer yet). Supported are: - MF-II keyboards on the native interface and A3000 keyboards via the CIA. - builtin SCSI interface (yet another instance of siop) - CIA timer. - Zorro II devices which don't do DMA (don't get mapped to Zorro II address space in the DraCo) - "local bus" devices which are autoconfigured by the boot rom (should be all); only an Altais driver is there (looks like a Retina Z3) Not yet supported are: - native timer of newer machines. - Real Time Clock. - serial, parallel + floppy on the SuperIO chip (that is also: no mouse) XXX You need an enhanced boot loader, which will committed in a few days. XXX std.draco should and will go away.
1996-05-10 00:30:30 +04:00
#
# processors this kernel should support
#
Bring in changes from the 1.2 branch which where only in the release
1996-08-11 16:27:50 +04:00
options "M68060" # support for 060
options "M060SP" # MC68060 software support (Required for 060)
First part of M68060 and DraCo support. * for the M68060 part: store buffer and branch target cache aren't enabled yet (this needs cleanup of lots of locore.s code which is a maze of little passages, all a little different) (and it wasn't yet tested in an accellerated Amiga, only in the DraCo). I've included a workaround for 2 of the CPU bugs in chips with Masks 1F43G and earlier, but didn't bother to deal with the can of worms in the [0-3]D11W chips. Be sure to get "68060 rev. 1" or more reported at kernel startup time, or at least mention it (or the mask revision, if available) when reporting problems. * for the DraCo: only machines with a CIA timer. I assigned machine id 32000+nn (0x7Dnn), where n is the machine readable Quicklogic custom chip revision (also printed at boot time). "Guaranteed to work" up to rev. 3, newer DraCo's aren't guaranteed to have any CIA (we don't have a driver for the new timer yet). Supported are: - MF-II keyboards on the native interface and A3000 keyboards via the CIA. - builtin SCSI interface (yet another instance of siop) - CIA timer. - Zorro II devices which don't do DMA (don't get mapped to Zorro II address space in the DraCo) - "local bus" devices which are autoconfigured by the boot rom (should be all); only an Altais driver is there (looks like a Retina Z3) Not yet supported are: - native timer of newer machines. - Real Time Clock. - serial, parallel + floppy on the SuperIO chip (that is also: no mouse) XXX You need an enhanced boot loader, which will committed in a few days. XXX std.draco should and will go away.
1996-05-10 00:30:30 +04:00
options FPCOPROC # Support for MC6888[12] (Required)
#
# Networking options
#
options INET # IP networking support (Required)
#options ISO # ISO Networking support
#options TPIP # ARGO TP networking support
#options CCITT # CCITT X.25
#options NS # Xerox XNS
#options EON # ISO CLNL over IP
#options GATEWAY # Packet forwarding
#options DIRECTED_BROADCAST # Broadcast across subnets
#options NSIP # XNS over IP
#
# File system related options
#
options QUOTA # Disk quotas for local disks
options NFSSERVER # Network File System server side code
options NFSCLIENT # Network File System client side code
#
# File systems
#
options FFS # Berkeley fast file system
options MFS # Memory based filesystem
options PROCFS # Process filesystem
options KERNFS # Kernel parameter filesystem (Recommended)
options FDESC # /dev/fd filesystem
options NULLFS # Loopback filesystem
options FIFO # FIFO operations on vnodes (Recommended)
options ADOSFS # AmigaDOS file system
options "CD9660" # ISO 9660 file system, with Rock Ridge
#options PORTAL # Portal filesystem
options MSDOSFS # MS-DOS filesystem
#
# Compatability options for various existing systems
#
add COMPAT_12.
1996-08-27 03:39:21 +04:00
options COMPAT_12
First part of M68060 and DraCo support. * for the M68060 part: store buffer and branch target cache aren't enabled yet (this needs cleanup of lots of locore.s code which is a maze of little passages, all a little different) (and it wasn't yet tested in an accellerated Amiga, only in the DraCo). I've included a workaround for 2 of the CPU bugs in chips with Masks 1F43G and earlier, but didn't bother to deal with the can of worms in the [0-3]D11W chips. Be sure to get "68060 rev. 1" or more reported at kernel startup time, or at least mention it (or the mask revision, if available) when reporting problems. * for the DraCo: only machines with a CIA timer. I assigned machine id 32000+nn (0x7Dnn), where n is the machine readable Quicklogic custom chip revision (also printed at boot time). "Guaranteed to work" up to rev. 3, newer DraCo's aren't guaranteed to have any CIA (we don't have a driver for the new timer yet). Supported are: - MF-II keyboards on the native interface and A3000 keyboards via the CIA. - builtin SCSI interface (yet another instance of siop) - CIA timer. - Zorro II devices which don't do DMA (don't get mapped to Zorro II address space in the DraCo) - "local bus" devices which are autoconfigured by the boot rom (should be all); only an Altais driver is there (looks like a Retina Z3) Not yet supported are: - native timer of newer machines. - Real Time Clock. - serial, parallel + floppy on the SuperIO chip (that is also: no mouse) XXX You need an enhanced boot loader, which will committed in a few days. XXX std.draco should and will go away.
1996-05-10 00:30:30 +04:00
#options "COMPAT_10" # compatability with older NetBSD release
#options COMPAT_SUNOS # Support to run Sun (m68k) executables
options "TCP_COMPAT_42" # Use 4.2 BSD style TCP
options "COMPAT_NOMID" # allow nonvalid machine id executables
#options COMPAT_HPUX # HP300 compatability
#
# Support for System V IPC facilities.
#
options SYSVSHM # System V-like shared memory
options SYSVMSG # System V-like messages
options SYSVSEM # System V-like semaphores
#
# Support for various kernel options
#
options GENERIC # Mini-root boot support
options LKM # Loadable kernel modules
options KTRACE # Add kernel tracing system call
options DIAGNOSTIC # Add additional error checking code
options "NKMEMCLUSTERS=256" # Size of kernel malloc area
#
# Misc. debuging options
#
options DEBUG # Add debugging statements
options DDB # Kernel debugger
#options SYSCALL_DEBUG # debug all syscalls.
#options SCSIDEBUG # Add SCSI debugging statements
#options PANICBUTTON # Forced crash via keypress (???)
#
# Amiga specific options
#
options MACHINE_NONCONTIG # Non-contiguous memory support
# higly recommended for DraCo
options RETINACONSOLE # enable code to allow retina to be console
#options "KFONT_8X11" # 8x11 font
# This is how you specify the blitting speed, higher values may speed up blits
# a littel bit. If you raise this value too much some trash may appear.
# the commented version is the default.
#options RH_MEMCLK 61000000
# this option enables the 64 bit sprite which doesn't seems to be work
# for quite a few people. E.g. The cursor sprite will turn to a block
# when moved to the top of the screen in X.
#options RH_64BIT_SPRITE
# enables fast scroll code appears to now work on 040 systems.
#options RETINA_SPEED_HACK
Disable the Hardwarecursor on the RetinaZ3 to solve the problems with wrong mouse jumps under X11. Remove the not working options KGDB from DRACO and GENERIC and added an option to enable the HWC for the RetinaZ3
1996-08-11 13:48:17 +04:00
# enables the Hardwarecursor which does not work on some systems.
#options RH_HARDWARECURSOR
First part of M68060 and DraCo support. * for the M68060 part: store buffer and branch target cache aren't enabled yet (this needs cleanup of lots of locore.s code which is a maze of little passages, all a little different) (and it wasn't yet tested in an accellerated Amiga, only in the DraCo). I've included a workaround for 2 of the CPU bugs in chips with Masks 1F43G and earlier, but didn't bother to deal with the can of worms in the [0-3]D11W chips. Be sure to get "68060 rev. 1" or more reported at kernel startup time, or at least mention it (or the mask revision, if available) when reporting problems. * for the DraCo: only machines with a CIA timer. I assigned machine id 32000+nn (0x7Dnn), where n is the machine readable Quicklogic custom chip revision (also printed at boot time). "Guaranteed to work" up to rev. 3, newer DraCo's aren't guaranteed to have any CIA (we don't have a driver for the new timer yet). Supported are: - MF-II keyboards on the native interface and A3000 keyboards via the CIA. - builtin SCSI interface (yet another instance of siop) - CIA timer. - Zorro II devices which don't do DMA (don't get mapped to Zorro II address space in the DraCo) - "local bus" devices which are autoconfigured by the boot rom (should be all); only an Altais driver is there (looks like a Retina Z3) Not yet supported are: - native timer of newer machines. - Real Time Clock. - serial, parallel + floppy on the SuperIO chip (that is also: no mouse) XXX You need an enhanced boot loader, which will committed in a few days. XXX std.draco should and will go away.
1996-05-10 00:30:30 +04:00
grfrh0 at zbus0 # Altais looks just like the Retina Z3
grf2 at grfrh0
ite2 at grf2 # terminal emulators for grf's
Bring in changes from the 1.2 branch which where only in the release
1996-08-11 16:27:50 +04:00
msc0 at zbus0 # A2232 MSC multiport serial.
mfc0 at zbus0 # MultiFaceCard I/O board
mfcs0 at mfc0 unit 0 # MFC serial
mfcs1 at mfc0 unit 1 # MFC serial
First part of M68060 and DraCo support. * for the M68060 part: store buffer and branch target cache aren't enabled yet (this needs cleanup of lots of locore.s code which is a maze of little passages, all a little different) (and it wasn't yet tested in an accellerated Amiga, only in the DraCo). I've included a workaround for 2 of the CPU bugs in chips with Masks 1F43G and earlier, but didn't bother to deal with the can of worms in the [0-3]D11W chips. Be sure to get "68060 rev. 1" or more reported at kernel startup time, or at least mention it (or the mask revision, if available) when reporting problems. * for the DraCo: only machines with a CIA timer. I assigned machine id 32000+nn (0x7Dnn), where n is the machine readable Quicklogic custom chip revision (also printed at boot time). "Guaranteed to work" up to rev. 3, newer DraCo's aren't guaranteed to have any CIA (we don't have a driver for the new timer yet). Supported are: - MF-II keyboards on the native interface and A3000 keyboards via the CIA. - builtin SCSI interface (yet another instance of siop) - CIA timer. - Zorro II devices which don't do DMA (don't get mapped to Zorro II address space in the DraCo) - "local bus" devices which are autoconfigured by the boot rom (should be all); only an Altais driver is there (looks like a Retina Z3) Not yet supported are: - native timer of newer machines. - Real Time Clock. - serial, parallel + floppy on the SuperIO chip (that is also: no mouse) XXX You need an enhanced boot loader, which will committed in a few days. XXX std.draco should and will go away.
1996-05-10 00:30:30 +04:00
#mfcp0 at mfc0 unit 0 # MFC parallel [not available yet]
#mfc1 at zbus0 # MultiFaceCard 2nd I/O board
#mfcs2 at mfc1 unit 0
#mfcs3 at mfc1 unit 1
#mfcp1 at mfc1 unit 0
Bring in changes from the 1.2 branch which where only in the release
1996-08-11 16:27:50 +04:00
le0 at zbus0 # Lance ethernet.
ed0 at zbus0 # dp8390 ethernet
es0 at zbus0 # SMC 91C90 ethernet
qn0 at zbus0 # quicknet ethernet
First part of M68060 and DraCo support. * for the M68060 part: store buffer and branch target cache aren't enabled yet (this needs cleanup of lots of locore.s code which is a maze of little passages, all a little different) (and it wasn't yet tested in an accellerated Amiga, only in the DraCo). I've included a workaround for 2 of the CPU bugs in chips with Masks 1F43G and earlier, but didn't bother to deal with the can of worms in the [0-3]D11W chips. Be sure to get "68060 rev. 1" or more reported at kernel startup time, or at least mention it (or the mask revision, if available) when reporting problems. * for the DraCo: only machines with a CIA timer. I assigned machine id 32000+nn (0x7Dnn), where n is the machine readable Quicklogic custom chip revision (also printed at boot time). "Guaranteed to work" up to rev. 3, newer DraCo's aren't guaranteed to have any CIA (we don't have a driver for the new timer yet). Supported are: - MF-II keyboards on the native interface and A3000 keyboards via the CIA. - builtin SCSI interface (yet another instance of siop) - CIA timer. - Zorro II devices which don't do DMA (don't get mapped to Zorro II address space in the DraCo) - "local bus" devices which are autoconfigured by the boot rom (should be all); only an Altais driver is there (looks like a Retina Z3) Not yet supported are: - native timer of newer machines. - Real Time Clock. - serial, parallel + floppy on the SuperIO chip (that is also: no mouse) XXX You need an enhanced boot loader, which will committed in a few days. XXX std.draco should and will go away.
1996-05-10 00:30:30 +04:00
ae0 at zbus0 # Ariadne ethernet
bah* at zbus0 # C= arcnet
# scsi stuff
drsc0 at mainbus0 # DraCo mainboard scsi
scsibus* at drsc0
# each hard drive from low target to high
# will configure to the next available sd unit number
sd* at scsibus? target ? lun ? # scsi disks
st* at scsibus? target ? lun ? # scsi tapes
cd* at scsibus? target ? lun ? # scsi cd's
- Move SWAPPAGER, VNODEPAGER and DEVPAGER to std.draco. - Remove not working KGDB. - Remove unused PANICWAIT. - Add ch and uk devices.
1996-12-20 22:18:16 +03:00
ss* at scsibus? target ? lun ? # scsi scanner
ch* at scsibus? target ? lun ? # scsi autochangers
uk* at scsibus? target ? lun ? # scsi unknown
First part of M68060 and DraCo support. * for the M68060 part: store buffer and branch target cache aren't enabled yet (this needs cleanup of lots of locore.s code which is a maze of little passages, all a little different) (and it wasn't yet tested in an accellerated Amiga, only in the DraCo). I've included a workaround for 2 of the CPU bugs in chips with Masks 1F43G and earlier, but didn't bother to deal with the can of worms in the [0-3]D11W chips. Be sure to get "68060 rev. 1" or more reported at kernel startup time, or at least mention it (or the mask revision, if available) when reporting problems. * for the DraCo: only machines with a CIA timer. I assigned machine id 32000+nn (0x7Dnn), where n is the machine readable Quicklogic custom chip revision (also printed at boot time). "Guaranteed to work" up to rev. 3, newer DraCo's aren't guaranteed to have any CIA (we don't have a driver for the new timer yet). Supported are: - MF-II keyboards on the native interface and A3000 keyboards via the CIA. - builtin SCSI interface (yet another instance of siop) - CIA timer. - Zorro II devices which don't do DMA (don't get mapped to Zorro II address space in the DraCo) - "local bus" devices which are autoconfigured by the boot rom (should be all); only an Altais driver is there (looks like a Retina Z3) Not yet supported are: - native timer of newer machines. - Real Time Clock. - serial, parallel + floppy on the SuperIO chip (that is also: no mouse) XXX You need an enhanced boot loader, which will committed in a few days. XXX std.draco should and will go away.
1996-05-10 00:30:30 +04:00
pseudo-device pty 16 # pseudo terminals
pseudo-device loop # network loopback
pseudo-device bpfilter 2 # berkeley packet filters
pseudo-device tun 2
config netbsd swap on generic