Aren
/
NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
NetBSD/sys/netbt/sco.h

86 lines
3.0 KiB
C
Raw Permalink Normal View History

split PRU_SEND function out of pr_generic() usrreq switches and put into separate functions xxx_send(struct socket *, struct mbuf *, struct mbuf *, struct mbuf *, struct lwp *) - always KASSERT(solocked(so)) even if not implemented - replace calls to pr_generic() with req = PRU_SEND with calls to pr_send() rename existing functions that operate on PCB for consistency (and to free up their names for xxx_send() PRUs - l2cap_send() -> l2cap_send_pcb() - sco_send() -> sco_send_pcb() - rfcomm_send() -> rfcomm_send_pcb() patch reviewed by rmind
2014-08-05 11:55:31 +04:00
/* $NetBSD: sco.h,v 1.11 2014/08/05 07:55:32 rtr Exp $ */
Initial import of bluetooth stack on behalf of Iain Hibbert. (plunky@, NetBSD Foundation Membership still pending.) This stack was written by Iain under sponsorship from Itronix Inc. The stack includes support for rfcomm networking (networking via your bluetooth enabled cell phone), hid devices (keyboards/mice), and headsets. Drivers for both PCMCIA and USB bluetooth controllers are included.
2006-06-19 19:44:33 +04:00
/*-
* Copyright (c) 2006 Itronix Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of Itronix Inc. may not be used to endorse
* or promote products derived from this software without specific
* prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY ITRONIX INC. ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL ITRONIX INC. BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _NETBT_SCO_H_
#define _NETBT_SCO_H_
#define SO_SCO_MTU 1
#define SO_SCO_HANDLE 2
#ifdef _KERNEL
/*
* SCO protocol control block
*/
struct sco_pcb {
struct hci_link *sp_link; /* SCO link */
unsigned int sp_flags; /* flags */
bdaddr_t sp_laddr; /* local address */
bdaddr_t sp_raddr; /* remote address */
unsigned int sp_mtu; /* link MTU */
int sp_pending; /* number of packets pending */
const struct btproto *sp_proto; /* upper layer protocol */
void *sp_upper; /* upper layer argument */
LIST_ENTRY(sco_pcb) sp_next;
};
LIST_HEAD(sco_pcb_list, sco_pcb);
Bluetooth fixes by Iain Hibbert: - Enable listening and incoming connections for SCO links.
2006-07-26 14:20:56 +04:00
extern struct sco_pcb_list sco_pcb;
Initial import of bluetooth stack on behalf of Iain Hibbert. (plunky@, NetBSD Foundation Membership still pending.) This stack was written by Iain under sponsorship from Itronix Inc. The stack includes support for rfcomm networking (networking via your bluetooth enabled cell phone), hid devices (keyboards/mice), and headsets. Drivers for both PCMCIA and USB bluetooth controllers are included.
2006-06-19 19:44:33 +04:00
/* sp_flags */
#define SP_LISTENING (1<<0) /* is listening pcb */
struct socket;
Convert socket options code to use a sockopt structure instead of laying everything into an mbuf. approved by core
2008-08-06 19:01:23 +04:00
struct sockopt;
/* sco_socket.c */
Initial import of bluetooth stack on behalf of Iain Hibbert. (plunky@, NetBSD Foundation Membership still pending.) This stack was written by Iain under sponsorship from Itronix Inc. The stack includes support for rfcomm networking (networking via your bluetooth enabled cell phone), hid devices (keyboards/mice), and headsets. Drivers for both PCMCIA and USB bluetooth controllers are included.
2006-06-19 19:44:33 +04:00
extern int sco_sendspace;
extern int sco_recvspace;
Convert socket options code to use a sockopt structure instead of laying everything into an mbuf. approved by core
2008-08-06 19:01:23 +04:00
int sco_ctloutput(int, struct socket *, struct sockopt *);
Initial import of bluetooth stack on behalf of Iain Hibbert. (plunky@, NetBSD Foundation Membership still pending.) This stack was written by Iain under sponsorship from Itronix Inc. The stack includes support for rfcomm networking (networking via your bluetooth enabled cell phone), hid devices (keyboards/mice), and headsets. Drivers for both PCMCIA and USB bluetooth controllers are included.
2006-06-19 19:44:33 +04:00
/* sco_upper.c */
netbt: rename some attach/detach functions to have _pcb suffix, so we could use standard attach/detach naming for pr_usrreq functions. No functional change.
2014-05-20 22:25:54 +04:00
int sco_attach_pcb(struct sco_pcb **, const struct btproto *, void *);
split PRU_BIND and PRU_LISTEN function out of pr_generic() usrreq switches and put into separate functions xxx_bind(struct socket *, struct mbuf *) xxx_listen(struct socket *) - always KASSERT(solocked(so)) even if not implemented - replace calls to pr_generic() with req = PRU_BIND with call to pr_bind() - replace calls to pr_generic() with req = PRU_LISTEN with call to pr_listen() - drop struct lwp * parameter from at_pcbsetaddr(), in_pcbbind() and unp_bind() and always use curlwp. rename existing functions that operate on PCB for consistency (and to free up their names for xxx_{bind,listen}() PRUs - l2cap_{bind,listen}() -> l2cap_{bind,listen}_pcb() - sco_{bind,listen}() -> sco_{bind,listen}_pcb() - rfcomm_{bind,listen}() -> rfcomm_{bind,listen}_pcb() patch reviewed by rmind welcome to netbsd 6.99.48
2014-07-24 19:12:03 +04:00
int sco_bind_pcb(struct sco_pcb *, struct sockaddr_bt *);
* split PRU_PEERADDR and PRU_SOCKADDR function out of pr_generic() usrreq switches and put into separate functions xxx_{peer,sock}addr(struct socket *, struct mbuf *). - KASSERT(solocked(so)) always in new functions even if request is not implemented - KASSERT(pcb != NULL) and KASSERT(nam) if the request is implemented and not for tcp. * for tcp roll #ifdef KPROF and #ifdef DEBUG code from tcp_usrreq() into easier to cut & paste functions tcp_debug_capture() and tcp_debug_trace() - functions provided by rmind - remaining use of PRU_{PEER,SOCK}ADDR #define to be removed in a future commit. * rename netbt functions to permit consistency of pru function names (as has been done with other requests already split out). - l2cap_{peer,sock}addr() -> l2cap_{peer,sock}_addr_pcb() - rfcomm_{peer,sock}addr() -> rfcomm_{peer,sock}_addr_pcb() - sco_{peer,sock}addr() -> sco_{peer,sock}_addr_pcb() * split/refactor do_sys_getsockname(lwp, fd, which, nam) into two functions do_sys_get{peer,sock}name(fd, nam). - move PRU_PEERADDR handling into do_sys_getpeername() from do_sys_getsockname() - have svr4_stream directly call do_sys_get{sock,peer}name() respectively instead of providing `which' & fix a DPRINTF string that incorrectly wrote "getpeername" when it meant "getsockname" - fix sys_getpeername() and sys_getsockname() to call do_sys_get{sock,peer}name() without `which' and `lwp' & adjust comments - bump kernel version for removal of lwp & which parameters from do_sys_getsockname() note: future cleanup to remove struct mbuf * abuse in xxx_{peer,sock}name() still to come, not done in this commit since it is easier to do post split. patch reviewed by rmind welcome to 6.99.47
2014-07-09 08:54:03 +04:00
int sco_sockaddr_pcb(struct sco_pcb *, struct sockaddr_bt *);
split PRU_CONNECT function out of pr_generic() usrreq switches and put into seaparate functions xxx_listen(struct socket *, struct mbuf *) - always KASSERT(solocked(so)) and KASSERT(nam != NULL) - replace calls to pr_generic() with req = PRU_CONNECT with pr_connect() - rename existin {l2cap,sco,rfcomm}_connect() to {l2cap,sco,rfcomm}_connect_pcb() respectively to permit naming consistency with other protocols functions. - drop struct lwp * parameter from unp_connect() and at_pcbconnect() and use curlwp instead where appropriate. patch reviewed by rmind
2014-07-30 14:04:25 +04:00
int sco_connect_pcb(struct sco_pcb *, struct sockaddr_bt *);
* split PRU_PEERADDR and PRU_SOCKADDR function out of pr_generic() usrreq switches and put into separate functions xxx_{peer,sock}addr(struct socket *, struct mbuf *). - KASSERT(solocked(so)) always in new functions even if request is not implemented - KASSERT(pcb != NULL) and KASSERT(nam) if the request is implemented and not for tcp. * for tcp roll #ifdef KPROF and #ifdef DEBUG code from tcp_usrreq() into easier to cut & paste functions tcp_debug_capture() and tcp_debug_trace() - functions provided by rmind - remaining use of PRU_{PEER,SOCK}ADDR #define to be removed in a future commit. * rename netbt functions to permit consistency of pru function names (as has been done with other requests already split out). - l2cap_{peer,sock}addr() -> l2cap_{peer,sock}_addr_pcb() - rfcomm_{peer,sock}addr() -> rfcomm_{peer,sock}_addr_pcb() - sco_{peer,sock}addr() -> sco_{peer,sock}_addr_pcb() * split/refactor do_sys_getsockname(lwp, fd, which, nam) into two functions do_sys_get{peer,sock}name(fd, nam). - move PRU_PEERADDR handling into do_sys_getpeername() from do_sys_getsockname() - have svr4_stream directly call do_sys_get{sock,peer}name() respectively instead of providing `which' & fix a DPRINTF string that incorrectly wrote "getpeername" when it meant "getsockname" - fix sys_getpeername() and sys_getsockname() to call do_sys_get{sock,peer}name() without `which' and `lwp' & adjust comments - bump kernel version for removal of lwp & which parameters from do_sys_getsockname() note: future cleanup to remove struct mbuf * abuse in xxx_{peer,sock}name() still to come, not done in this commit since it is easier to do post split. patch reviewed by rmind welcome to 6.99.47
2014-07-09 08:54:03 +04:00
int sco_peeraddr_pcb(struct sco_pcb *, struct sockaddr_bt *);
split PRU_DISCONNECT, PRU_SHUTDOWN and PRU_ABORT function out of pr_generic() usrreq switches and put into separate functions xxx_disconnect(struct socket *) xxx_shutdown(struct socket *) xxx_abort(struct socket *) - always KASSERT(solocked(so)) even if not implemented - replace calls to pr_generic() with req = PRU_{DISCONNECT,SHUTDOWN,ABORT} with calls to pr_{disconnect,shutdown,abort}() respectively rename existing internal functions used to implement above functionality to permit use of the names for xxx_{disconnect,shutdown,abort}(). - {l2cap,sco,rfcomm}_disconnect() -> {l2cap,sco,rfcomm}_disconnect_pcb() - {unp,rip,tcp}_disconnect() -> {unp,rip,tcp}_disconnect1() - unp_shutdown() -> unp_shutdown1() patch reviewed by rmind
2014-07-31 07:39:35 +04:00
int sco_disconnect_pcb(struct sco_pcb *, int);
netbt: rename some attach/detach functions to have _pcb suffix, so we could use standard attach/detach naming for pr_usrreq functions. No functional change.
2014-05-20 22:25:54 +04:00
void sco_detach_pcb(struct sco_pcb **);
split PRU_BIND and PRU_LISTEN function out of pr_generic() usrreq switches and put into separate functions xxx_bind(struct socket *, struct mbuf *) xxx_listen(struct socket *) - always KASSERT(solocked(so)) even if not implemented - replace calls to pr_generic() with req = PRU_BIND with call to pr_bind() - replace calls to pr_generic() with req = PRU_LISTEN with call to pr_listen() - drop struct lwp * parameter from at_pcbsetaddr(), in_pcbbind() and unp_bind() and always use curlwp. rename existing functions that operate on PCB for consistency (and to free up their names for xxx_{bind,listen}() PRUs - l2cap_{bind,listen}() -> l2cap_{bind,listen}_pcb() - sco_{bind,listen}() -> sco_{bind,listen}_pcb() - rfcomm_{bind,listen}() -> rfcomm_{bind,listen}_pcb() patch reviewed by rmind welcome to netbsd 6.99.48
2014-07-24 19:12:03 +04:00
int sco_listen_pcb(struct sco_pcb *);
split PRU_SEND function out of pr_generic() usrreq switches and put into separate functions xxx_send(struct socket *, struct mbuf *, struct mbuf *, struct mbuf *, struct lwp *) - always KASSERT(solocked(so)) even if not implemented - replace calls to pr_generic() with req = PRU_SEND with calls to pr_send() rename existing functions that operate on PCB for consistency (and to free up their names for xxx_send() PRUs - l2cap_send() -> l2cap_send_pcb() - sco_send() -> sco_send_pcb() - rfcomm_send() -> rfcomm_send_pcb() patch reviewed by rmind
2014-08-05 11:55:31 +04:00
int sco_send_pcb(struct sco_pcb *, struct mbuf *);
Convert socket options code to use a sockopt structure instead of laying everything into an mbuf. approved by core
2008-08-06 19:01:23 +04:00
int sco_setopt(struct sco_pcb *, const struct sockopt *);
int sco_getopt(struct sco_pcb *, struct sockopt *);
Initial import of bluetooth stack on behalf of Iain Hibbert. (plunky@, NetBSD Foundation Membership still pending.) This stack was written by Iain under sponsorship from Itronix Inc. The stack includes support for rfcomm networking (networking via your bluetooth enabled cell phone), hid devices (keyboards/mice), and headsets. Drivers for both PCMCIA and USB bluetooth controllers are included.
2006-06-19 19:44:33 +04:00
#endif /* _KERNEL */
#endif /* _NETBT_SCO_H_ */