NetBSD/sys/dev/mii/rdcphy.c

254 lines
6.8 KiB
C
Raw Permalink Normal View History

2020-04-08 06:01:58 +03:00
/* $NetBSD: rdcphy.c,v 1.8 2020/04/08 03:01:58 msaitoh Exp $ */
/*-
* Copyright (c) 2010, Pyun YongHyeon <yongari@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice unmodified, this list of conditions, and the following
* disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/* FreeBSD: src/sys/dev/mii/rdcphy.c,v 1.1 2010/12/30 23:50:25 yongari Exp */
/*
* Driver for the RDC Semiconductor R6040 10/100 PHY.
*/
#include <sys/cdefs.h>
2020-04-08 06:01:58 +03:00
__KERNEL_RCSID(0, "$NetBSD: rdcphy.c,v 1.8 2020/04/08 03:01:58 msaitoh Exp $");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/device.h>
#include <sys/socket.h>
#include <sys/errno.h>
#include <sys/bus.h>
#include <net/if.h>
#include <net/if_media.h>
#include <dev/mii/mii.h>
#include <dev/mii/miivar.h>
#include <dev/mii/miidevs.h>
#include <dev/mii/rdcphyreg.h>
struct rdcphy_softc {
struct mii_softc sc_mii;
int sc_mii_link_tick;
#define RDCPHY_MANNEG_TICK 3
};
static int rdcphymatch(device_t, cfdata_t, void *);
static void rdcphyattach(device_t, device_t, void *);
CFATTACH_DECL_NEW(rdcphy, sizeof(struct rdcphy_softc),
rdcphymatch, rdcphyattach, mii_phy_detach, mii_phy_activate);
static int rdcphy_service(struct mii_softc *, struct mii_data *, int);
static void rdcphy_status(struct mii_softc *);
static const struct mii_phy_funcs rdcphy_funcs = {
rdcphy_service, rdcphy_status, mii_phy_reset,
};
static const struct mii_phydesc rdcphys[] = {
2020-02-05 09:39:13 +03:00
MII_PHY_DESC(xxRDC, R6040),
2020-04-08 06:01:58 +03:00
MII_PHY_DESC(xxRDC, R6040_2),
MII_PHY_DESC(xxRDC, R6040_3),
MII_PHY_END,
};
static int
rdcphymatch(device_t parent, cfdata_t match, void *aux)
{
struct mii_attach_args *ma = aux;
if (mii_phy_match(ma, rdcphys) != NULL)
2019-03-25 12:20:46 +03:00
return 10;
2019-03-25 12:20:46 +03:00
return 0;
}
static void
rdcphyattach(device_t parent, device_t self, void *aux)
{
struct rdcphy_softc *rsc = device_private(self);
struct mii_softc *sc = &rsc->sc_mii;
struct mii_attach_args *ma = aux;
struct mii_data *mii = ma->mii_data;
const struct mii_phydesc *mpd;
mpd = mii_phy_match(ma, rdcphys);
aprint_naive(": Media interface\n");
aprint_normal(": %s, rev. %d\n", mpd->mpd_name, MII_REV(ma->mii_id2));
sc->mii_dev = self;
sc->mii_inst = mii->mii_instance;
sc->mii_phy = ma->mii_phyno;
sc->mii_funcs = &rdcphy_funcs;
sc->mii_pdata = mii;
sc->mii_flags = ma->mii_flags;
mii_lock(mii);
PHY_RESET(sc);
Change MII PHY read/write API from: int (*mii_readreg_t)(device_t, int, int); void (*mii_writereg_t)(device_t, int, int, int); to: int (*mii_readreg_t)(device_t, int, int, uint16_t *); int (*mii_writereg_t)(device_t, int, int, uint16_t); Now we can test if a read/write operation failed or not by the return value. In 802.3 spec says that the PHY shall not respond to read/write transaction to the unimplemented register(22.2.4.3). Detecting timeout can be used to check whether a register is implemented or not (if the register conforms to the spec). ukphy(4) can be used this for MII_MMDACR and MII_MMDAADR. Note that I noticed that the following code do infinite loop in the read/wirte function. If it accesses unimplemented PHY register, it will hang. It should be fixed: arm/at91/at91emac.c arm/ep93xx/epe.c arm/omap/omapl1x_emac.c mips/ralink/ralink_eth.c arch/powerpc/booke/dev/pq3etsec.c(read) dev/cadence/if_cemac.c <- hkenken dev/ic/lan9118.c Tested with the following device: axe+ukphy axe+rgephy axen+rgephy (tested by Andrius V) wm+atphy wm+ukphy wm+igphy wm+ihphy wm+makphy sk+makphy sk+brgphy sk+gentbi msk+makphy sip+icsphy sip+ukphy re+rgephy bge+brgphy bnx+brgphy gsip+gphyter rtk+rlphy fxp+inphy (tested by Andrius V) tlp+acphy ex+exphy epic+qsphy vge+ciphy (tested by Andrius V) vr+ukphy (tested by Andrius V) vte+ukphy (tested by Andrius V) Not tested (MAC): arm:at91emac arm:cemac arm:epe arm:geminigmac arm:enet arm:cpsw arm:emac(omac) arm:emac(sunxi) arm:npe evbppc:temac macppc:bm macppc:gm mips:aumac mips:ae mips:cnmac mips:reth mips:sbmac playstation2:smap powerpc:tsec powerpc:emac(ibm4xx) sgimips:mec sparc:be sf ne(ax88190, dl10019) awge ep gem hme smsh mtd sm age alc ale bce cas et jme lii nfe pcn ste stge tl xi aue mue smsc udav url Not tested (PHY): amhphy bmtphy dmphy etphy glxtphy ikphy iophy lxtphy nsphyter pnaphy rdcphy sqphy tlphy tqphy urlphy
2019-01-22 06:42:24 +03:00
PHY_READ(sc, MII_BMSR, &sc->mii_capabilities);
sc->mii_capabilities &= ma->mii_capmask;
if (sc->mii_capabilities & BMSR_EXTSTAT)
Change MII PHY read/write API from: int (*mii_readreg_t)(device_t, int, int); void (*mii_writereg_t)(device_t, int, int, int); to: int (*mii_readreg_t)(device_t, int, int, uint16_t *); int (*mii_writereg_t)(device_t, int, int, uint16_t); Now we can test if a read/write operation failed or not by the return value. In 802.3 spec says that the PHY shall not respond to read/write transaction to the unimplemented register(22.2.4.3). Detecting timeout can be used to check whether a register is implemented or not (if the register conforms to the spec). ukphy(4) can be used this for MII_MMDACR and MII_MMDAADR. Note that I noticed that the following code do infinite loop in the read/wirte function. If it accesses unimplemented PHY register, it will hang. It should be fixed: arm/at91/at91emac.c arm/ep93xx/epe.c arm/omap/omapl1x_emac.c mips/ralink/ralink_eth.c arch/powerpc/booke/dev/pq3etsec.c(read) dev/cadence/if_cemac.c <- hkenken dev/ic/lan9118.c Tested with the following device: axe+ukphy axe+rgephy axen+rgephy (tested by Andrius V) wm+atphy wm+ukphy wm+igphy wm+ihphy wm+makphy sk+makphy sk+brgphy sk+gentbi msk+makphy sip+icsphy sip+ukphy re+rgephy bge+brgphy bnx+brgphy gsip+gphyter rtk+rlphy fxp+inphy (tested by Andrius V) tlp+acphy ex+exphy epic+qsphy vge+ciphy (tested by Andrius V) vr+ukphy (tested by Andrius V) vte+ukphy (tested by Andrius V) Not tested (MAC): arm:at91emac arm:cemac arm:epe arm:geminigmac arm:enet arm:cpsw arm:emac(omac) arm:emac(sunxi) arm:npe evbppc:temac macppc:bm macppc:gm mips:aumac mips:ae mips:cnmac mips:reth mips:sbmac playstation2:smap powerpc:tsec powerpc:emac(ibm4xx) sgimips:mec sparc:be sf ne(ax88190, dl10019) awge ep gem hme smsh mtd sm age alc ale bce cas et jme lii nfe pcn ste stge tl xi aue mue smsc udav url Not tested (PHY): amhphy bmtphy dmphy etphy glxtphy ikphy iophy lxtphy nsphyter pnaphy rdcphy sqphy tlphy tqphy urlphy
2019-01-22 06:42:24 +03:00
PHY_READ(sc, MII_EXTSR, &sc->mii_extcapabilities);
mii_unlock(mii);
mii_phy_add_media(sc);
}
static int
rdcphy_service(struct mii_softc *sc, struct mii_data *mii, int cmd)
{
struct rdcphy_softc *rsc = (struct rdcphy_softc *)sc;
struct ifmedia_entry *ife = mii->mii_media.ifm_cur;
KASSERT(mii_locked(mii));
switch (cmd) {
case MII_POLLSTAT:
break;
case MII_MEDIACHG:
2019-03-25 12:20:46 +03:00
/* If the interface is not up, don't do anything. */
if ((mii->mii_ifp->if_flags & IFF_UP) == 0)
break;
mii_phy_setmedia(sc);
switch (IFM_SUBTYPE(ife->ifm_media)) {
case IFM_100_TX:
case IFM_10_T:
/*
2019-03-25 12:20:46 +03:00
* Report fake lost link event to parent driver. This
* will stop MAC of parent driver and make it possible
* to reconfigure MAC after completion of link
* establishment.
* Note, the parent MAC seems to require restarting MAC
* when underlying any PHY configuration was changed
* even if the resolved speed/duplex was not changed at
* all.
*/
mii->mii_media_status = 0;
mii->mii_media_active = IFM_ETHER | IFM_NONE;
rsc->sc_mii_link_tick = RDCPHY_MANNEG_TICK;
/* Immediately report link down. */
mii_phy_update(sc, MII_MEDIACHG);
2019-03-25 12:20:46 +03:00
return 0;
default:
break;
}
break;
case MII_TICK:
if (mii_phy_tick(sc) == EJUSTRETURN)
2019-03-25 12:20:46 +03:00
return 0;
if (IFM_SUBTYPE(ife->ifm_media) != IFM_AUTO) {
/*
2019-03-25 12:20:46 +03:00
* It seems the PHY hardware does not correctly report
* link status changes when manual link configuration
* is in progress. It is also possible for the PHY to
* complete establishing a link within one second such
* that mii(4) did not notice the link change.
* To workaround the issue, emulate lost link event and
* wait for 3 seconds when manual link configuration
* is in progress. 3 seconds would be long enough to
* absorb transient link flips.
*/
if (rsc->sc_mii_link_tick > 0) {
rsc->sc_mii_link_tick--;
2019-03-25 12:20:46 +03:00
return 0;
}
}
break;
}
/* Update the media status. */
rdcphy_status(sc);
/* Callback if something changed. */
mii_phy_update(sc, cmd);
2019-03-25 12:20:46 +03:00
return 0;
}
static void
rdcphy_status(struct mii_softc *sc)
{
struct mii_data *mii = sc->mii_pdata;
Change MII PHY read/write API from: int (*mii_readreg_t)(device_t, int, int); void (*mii_writereg_t)(device_t, int, int, int); to: int (*mii_readreg_t)(device_t, int, int, uint16_t *); int (*mii_writereg_t)(device_t, int, int, uint16_t); Now we can test if a read/write operation failed or not by the return value. In 802.3 spec says that the PHY shall not respond to read/write transaction to the unimplemented register(22.2.4.3). Detecting timeout can be used to check whether a register is implemented or not (if the register conforms to the spec). ukphy(4) can be used this for MII_MMDACR and MII_MMDAADR. Note that I noticed that the following code do infinite loop in the read/wirte function. If it accesses unimplemented PHY register, it will hang. It should be fixed: arm/at91/at91emac.c arm/ep93xx/epe.c arm/omap/omapl1x_emac.c mips/ralink/ralink_eth.c arch/powerpc/booke/dev/pq3etsec.c(read) dev/cadence/if_cemac.c <- hkenken dev/ic/lan9118.c Tested with the following device: axe+ukphy axe+rgephy axen+rgephy (tested by Andrius V) wm+atphy wm+ukphy wm+igphy wm+ihphy wm+makphy sk+makphy sk+brgphy sk+gentbi msk+makphy sip+icsphy sip+ukphy re+rgephy bge+brgphy bnx+brgphy gsip+gphyter rtk+rlphy fxp+inphy (tested by Andrius V) tlp+acphy ex+exphy epic+qsphy vge+ciphy (tested by Andrius V) vr+ukphy (tested by Andrius V) vte+ukphy (tested by Andrius V) Not tested (MAC): arm:at91emac arm:cemac arm:epe arm:geminigmac arm:enet arm:cpsw arm:emac(omac) arm:emac(sunxi) arm:npe evbppc:temac macppc:bm macppc:gm mips:aumac mips:ae mips:cnmac mips:reth mips:sbmac playstation2:smap powerpc:tsec powerpc:emac(ibm4xx) sgimips:mec sparc:be sf ne(ax88190, dl10019) awge ep gem hme smsh mtd sm age alc ale bce cas et jme lii nfe pcn ste stge tl xi aue mue smsc udav url Not tested (PHY): amhphy bmtphy dmphy etphy glxtphy ikphy iophy lxtphy nsphyter pnaphy rdcphy sqphy tlphy tqphy urlphy
2019-01-22 06:42:24 +03:00
uint16_t bmsr, bmcr, physts;
KASSERT(mii_locked(mii));
mii->mii_media_status = IFM_AVALID;
mii->mii_media_active = IFM_ETHER;
Change MII PHY read/write API from: int (*mii_readreg_t)(device_t, int, int); void (*mii_writereg_t)(device_t, int, int, int); to: int (*mii_readreg_t)(device_t, int, int, uint16_t *); int (*mii_writereg_t)(device_t, int, int, uint16_t); Now we can test if a read/write operation failed or not by the return value. In 802.3 spec says that the PHY shall not respond to read/write transaction to the unimplemented register(22.2.4.3). Detecting timeout can be used to check whether a register is implemented or not (if the register conforms to the spec). ukphy(4) can be used this for MII_MMDACR and MII_MMDAADR. Note that I noticed that the following code do infinite loop in the read/wirte function. If it accesses unimplemented PHY register, it will hang. It should be fixed: arm/at91/at91emac.c arm/ep93xx/epe.c arm/omap/omapl1x_emac.c mips/ralink/ralink_eth.c arch/powerpc/booke/dev/pq3etsec.c(read) dev/cadence/if_cemac.c <- hkenken dev/ic/lan9118.c Tested with the following device: axe+ukphy axe+rgephy axen+rgephy (tested by Andrius V) wm+atphy wm+ukphy wm+igphy wm+ihphy wm+makphy sk+makphy sk+brgphy sk+gentbi msk+makphy sip+icsphy sip+ukphy re+rgephy bge+brgphy bnx+brgphy gsip+gphyter rtk+rlphy fxp+inphy (tested by Andrius V) tlp+acphy ex+exphy epic+qsphy vge+ciphy (tested by Andrius V) vr+ukphy (tested by Andrius V) vte+ukphy (tested by Andrius V) Not tested (MAC): arm:at91emac arm:cemac arm:epe arm:geminigmac arm:enet arm:cpsw arm:emac(omac) arm:emac(sunxi) arm:npe evbppc:temac macppc:bm macppc:gm mips:aumac mips:ae mips:cnmac mips:reth mips:sbmac playstation2:smap powerpc:tsec powerpc:emac(ibm4xx) sgimips:mec sparc:be sf ne(ax88190, dl10019) awge ep gem hme smsh mtd sm age alc ale bce cas et jme lii nfe pcn ste stge tl xi aue mue smsc udav url Not tested (PHY): amhphy bmtphy dmphy etphy glxtphy ikphy iophy lxtphy nsphyter pnaphy rdcphy sqphy tlphy tqphy urlphy
2019-01-22 06:42:24 +03:00
PHY_READ(sc, MII_BMSR, &bmsr);
PHY_READ(sc, MII_BMSR, &bmsr);
PHY_READ(sc, MII_RDCPHY_STATUS, &physts);
if ((physts & STATUS_LINK_UP) != 0)
mii->mii_media_status |= IFM_ACTIVE;
Change MII PHY read/write API from: int (*mii_readreg_t)(device_t, int, int); void (*mii_writereg_t)(device_t, int, int, int); to: int (*mii_readreg_t)(device_t, int, int, uint16_t *); int (*mii_writereg_t)(device_t, int, int, uint16_t); Now we can test if a read/write operation failed or not by the return value. In 802.3 spec says that the PHY shall not respond to read/write transaction to the unimplemented register(22.2.4.3). Detecting timeout can be used to check whether a register is implemented or not (if the register conforms to the spec). ukphy(4) can be used this for MII_MMDACR and MII_MMDAADR. Note that I noticed that the following code do infinite loop in the read/wirte function. If it accesses unimplemented PHY register, it will hang. It should be fixed: arm/at91/at91emac.c arm/ep93xx/epe.c arm/omap/omapl1x_emac.c mips/ralink/ralink_eth.c arch/powerpc/booke/dev/pq3etsec.c(read) dev/cadence/if_cemac.c <- hkenken dev/ic/lan9118.c Tested with the following device: axe+ukphy axe+rgephy axen+rgephy (tested by Andrius V) wm+atphy wm+ukphy wm+igphy wm+ihphy wm+makphy sk+makphy sk+brgphy sk+gentbi msk+makphy sip+icsphy sip+ukphy re+rgephy bge+brgphy bnx+brgphy gsip+gphyter rtk+rlphy fxp+inphy (tested by Andrius V) tlp+acphy ex+exphy epic+qsphy vge+ciphy (tested by Andrius V) vr+ukphy (tested by Andrius V) vte+ukphy (tested by Andrius V) Not tested (MAC): arm:at91emac arm:cemac arm:epe arm:geminigmac arm:enet arm:cpsw arm:emac(omac) arm:emac(sunxi) arm:npe evbppc:temac macppc:bm macppc:gm mips:aumac mips:ae mips:cnmac mips:reth mips:sbmac playstation2:smap powerpc:tsec powerpc:emac(ibm4xx) sgimips:mec sparc:be sf ne(ax88190, dl10019) awge ep gem hme smsh mtd sm age alc ale bce cas et jme lii nfe pcn ste stge tl xi aue mue smsc udav url Not tested (PHY): amhphy bmtphy dmphy etphy glxtphy ikphy iophy lxtphy nsphyter pnaphy rdcphy sqphy tlphy tqphy urlphy
2019-01-22 06:42:24 +03:00
PHY_READ(sc, MII_BMCR, &bmcr);
if ((bmcr & BMCR_ISO) != 0) {
mii->mii_media_active |= IFM_NONE;
mii->mii_media_status = 0;
return;
}
if ((bmcr & BMCR_LOOP) != 0)
mii->mii_media_active |= IFM_LOOP;
if ((bmcr & BMCR_AUTOEN) != 0) {
if ((bmsr & BMSR_ACOMP) == 0) {
/* Erg, still trying, I guess... */
mii->mii_media_active |= IFM_NONE;
return;
}
}
switch (physts & STATUS_SPEED_MASK) {
case STATUS_SPEED_100:
mii->mii_media_active |= IFM_100_TX;
break;
case STATUS_SPEED_10:
mii->mii_media_active |= IFM_10_T;
break;
default:
mii->mii_media_active |= IFM_NONE;
return;
}
if ((physts & STATUS_FULL_DUPLEX) != 0)
mii->mii_media_active |= IFM_FDX | mii_phy_flowstatus(sc);
else
mii->mii_media_active |= IFM_HDX;
}