2018-02-22 13:09:12 +03:00
|
|
|
/* $NetBSD: sdtemp_reg.h,v 1.13 2018/02/22 10:09:12 msaitoh Exp $ */
|
2009-05-09 19:04:25 +04:00
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Copyright (c) 2009 The NetBSD Foundation, Inc.
|
|
|
|
|
* All rights reserved.
|
|
|
|
|
*
|
|
|
|
|
* This code is derived from software contributed to The NetBSD Foundation
|
|
|
|
|
* by Paul Goyette.
|
|
|
|
|
*
|
|
|
|
|
* Redistribution and use in source and binary forms, with or without
|
|
|
|
|
* modification, are permitted provided that the following conditions
|
|
|
|
|
* are met:
|
|
|
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
|
|
|
* notice, this list of conditions and the following disclaimer.
|
|
|
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
|
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
|
|
|
* documentation and/or other materials provided with the distribution.
|
|
|
|
|
*
|
|
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
|
|
|
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
|
|
|
|
|
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
|
|
|
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
|
|
|
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
|
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
|
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
|
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
|
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
|
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
|
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#ifndef _DEV_I2C_SDTEMPREG_H
|
|
|
|
|
#define _DEV_I2C_SDTEMPREG_H
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Following definitions derived from JEDEC Standard 21-C section 4.7
|
|
|
|
|
* available at http://www.jedec.org/download/search/4_07R15.pdf
|
|
|
|
|
*/
|
2013-08-07 23:38:45 +04:00
|
|
|
#define SDTEMP_ADDRMASK 0x3f8
|
2009-05-09 19:04:25 +04:00
|
|
|
#define SDTEMP_ADDR 0x18 /* I2C address 001 1xxx */
|
|
|
|
|
|
|
|
|
|
#define SDTEMP_REG_CAPABILITY 0x00
|
|
|
|
|
#define SDTEMP_REG_CONFIG 0x01
|
|
|
|
|
#define SDTEMP_REG_UPPER_LIM 0x02
|
|
|
|
|
#define SDTEMP_REG_LOWER_LIM 0x03
|
|
|
|
|
#define SDTEMP_REG_CRIT_LIM 0x04
|
|
|
|
|
#define SDTEMP_REG_AMBIENT_TEMP 0x05
|
|
|
|
|
#define SDTEMP_REG_MFG_ID 0x06
|
|
|
|
|
#define SDTEMP_REG_DEV_REV 0x07
|
|
|
|
|
|
|
|
|
|
#define SDTEMP_CAP_HAS_ALARM 0x0001
|
|
|
|
|
#define SDTEMP_CAP_ACCURACY_1C 0x0002
|
|
|
|
|
#define SDTEMP_CAP_WIDER_RANGE 0x0004
|
|
|
|
|
#define SDTEMP_CAP_RESOLUTION 0x0018
|
Reviewed and OK'd by pgoyette:
- Add support for Atmel AT30TS00, AT30TSE004, Giantec GT30TS00, GT34TS02,
Microchip MCP9804, MCP98244, IDT TS3000GB[02], TS3001GB2, TSE2004GB2,
and On Semiconductor CAT34TS04. Taken from OpenBSD.
- Add IDT TSE2002GB2.
- Check the temperature resolution field in the capability register instead
of the hard coded value in the match table. With this change, some devices'
temperature resolution would be fixed.
- The resolution register is a vendor specific register.
- All of IDT devices have the resolution register.
- The address of the resolution register of Microchip MCP98244 is different
from other Microchip devices.
- Show accuracy, range, resolution, high voltage standoff and shutdown with
aprint_normal().
- Show timeout with aprint_debug().
2016-07-26 10:30:16 +03:00
|
|
|
#define SDTEMP_CAP_RESOLUTION_MAX 0x0003 /* 0.0625C */
|
|
|
|
|
#define SDTEMP_CAP_VHV 0x0020
|
|
|
|
|
#define SDTEMP_CAP_TMOUT 0x0040
|
|
|
|
|
#define SDTEMP_CAP_EVSD 0x0080
|
|
|
|
|
|
2009-05-09 19:04:25 +04:00
|
|
|
|
|
|
|
|
#define SDTEMP_CONFIG_EVENT_MODE 0x0001
|
|
|
|
|
#define SDTEMP_CONFIG_EVENT_POL_AH 0x0002
|
|
|
|
|
#define SDTEMP_CONFIG_EVENT_CRIT_ONLY 0x0004
|
|
|
|
|
#define SDTEMP_CONFIG_EVENT_ENABLED 0x0008
|
|
|
|
|
#define SDTEMP_CONFIG_EVENT_STATUS 0x0010
|
|
|
|
|
#define SDTEMP_CONFIG_INT_CLEAR 0x0020
|
|
|
|
|
#define SDTEMP_CONFIG_WINDOW_LOCKED 0x0040
|
|
|
|
|
#define SDTEMP_CONFIG_CRITICAL_LOCKED 0x0080
|
|
|
|
|
#define SDTEMP_CONFIG_SHUTDOWN_MODE 0x0100
|
|
|
|
|
#define SDTEMP_CONFIG_HYSTERESIS 0x0600
|
|
|
|
|
|
|
|
|
|
#define SDTEMP_HYSTERESIS_NONE 0x0000
|
|
|
|
|
#define SDTEMP_HYSTERESIS_15 0x0200
|
|
|
|
|
#define SDTEMP_HYSTERESIS_30 0x0400
|
|
|
|
|
#define SDTEMP_HYSTERESIS_60 0x0600
|
|
|
|
|
|
|
|
|
|
/*
|
2009-06-13 23:02:33 +04:00
|
|
|
* Temperature is a 13-bit value in the range of -256 <= x < +256 degrees.
|
2009-05-09 19:04:25 +04:00
|
|
|
* Maximum resolution is 0.0625C (1/16th degree, 4 bits), but some devices
|
|
|
|
|
* may have only 0.2500C or 0.1250C (1 or 2 bits), and some devices may not
|
|
|
|
|
* be able to represent negative values (not that we'd expect them, anyway).
|
|
|
|
|
*/
|
|
|
|
|
#define SDTEMP_TEMP_MASK 0x0FFF
|
|
|
|
|
#define SDTEMP_TEMP_NEGATIVE 0x1000
|
|
|
|
|
#define SDTEMP_TEMP_SIGN_EXT 0xF000
|
|
|
|
|
|
|
|
|
|
/*
|
2009-06-13 23:02:33 +04:00
|
|
|
* Status bits set in SDTEMP_REG_AMBIENT_TEMP only
|
2009-05-09 19:04:25 +04:00
|
|
|
*/
|
|
|
|
|
#define SDTEMP_ABOVE_CRIT 0x8000
|
|
|
|
|
#define SDTEMP_ABOVE_UPPER 0x4000
|
|
|
|
|
#define SDTEMP_BELOW_LOWER 0x2000
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Devices known to conform to JEDEC JC42.4
|
|
|
|
|
*/
|
Reviewed and OK'd by pgoyette:
- Add support for Atmel AT30TS00, AT30TSE004, Giantec GT30TS00, GT34TS02,
Microchip MCP9804, MCP98244, IDT TS3000GB[02], TS3001GB2, TSE2004GB2,
and On Semiconductor CAT34TS04. Taken from OpenBSD.
- Add IDT TSE2002GB2.
- Check the temperature resolution field in the capability register instead
of the hard coded value in the match table. With this change, some devices'
temperature resolution would be fixed.
- The resolution register is a vendor specific register.
- All of IDT devices have the resolution register.
- The address of the resolution register of Microchip MCP98244 is different
from other Microchip devices.
- Show accuracy, range, resolution, high voltage standoff and shutdown with
aprint_normal().
- Show timeout with aprint_debug().
2016-07-26 10:30:16 +03:00
|
|
|
|
2016-07-28 12:11:13 +03:00
|
|
|
/* TSE2004av definitions (JEDEC Standard No. 21-C Page 4.1.6) */
|
|
|
|
|
#define TSE2004AV_ID 0x2200
|
|
|
|
|
#define TSE2004AV_MASK 0xff00 /* ID is upper 8bits */
|
|
|
|
|
#define TSE2004AV_REV 0x00ff /* Revision is lower 8bits */
|
|
|
|
|
#define SDTEMP_IS_TSE2004AV(dev) (((dev) & TSE2004AV_MASK) == TSE2004AV_ID)
|
|
|
|
|
|
Reviewed and OK'd by pgoyette:
- Add support for Atmel AT30TS00, AT30TSE004, Giantec GT30TS00, GT34TS02,
Microchip MCP9804, MCP98244, IDT TS3000GB[02], TS3001GB2, TSE2004GB2,
and On Semiconductor CAT34TS04. Taken from OpenBSD.
- Add IDT TSE2002GB2.
- Check the temperature resolution field in the capability register instead
of the hard coded value in the match table. With this change, some devices'
temperature resolution would be fixed.
- The resolution register is a vendor specific register.
- All of IDT devices have the resolution register.
- The address of the resolution register of Microchip MCP98244 is different
from other Microchip devices.
- Show accuracy, range, resolution, high voltage standoff and shutdown with
aprint_normal().
- Show timeout with aprint_debug().
2016-07-26 10:30:16 +03:00
|
|
|
/* Atmel */
|
|
|
|
|
#define AT_MANUFACTURER_ID 0x001f
|
|
|
|
|
#define AT_30TS00_DEVICE_ID 0x8201 /* Also matches 002A and 002B */
|
|
|
|
|
#define AT_30TS00_MASK 0xFFFF
|
|
|
|
|
|
|
|
|
|
#define AT2_MANUFACTURER_ID 0x1114
|
|
|
|
|
#define AT2_30TSE004_DEVICE_ID 0x2200
|
|
|
|
|
#define AT2_30TSE004_MASK 0xFFFF
|
|
|
|
|
|
|
|
|
|
/* Giantec Semiconductor */
|
|
|
|
|
#define GT_MANUFACTURER_ID 0x1C68
|
|
|
|
|
#define GT_30TS00_DEVICE_ID 0x2201
|
|
|
|
|
#define GT_30TS00_MASK 0xFFFF
|
|
|
|
|
|
|
|
|
|
#define GT2_MANUFACTURER_ID 0x132D
|
|
|
|
|
#define GT2_34TS02_DEVICE_ID 0x3300
|
|
|
|
|
#define GT2_34TS02_MASK 0xFFFF
|
|
|
|
|
|
|
|
|
|
/* Maxim */
|
2009-05-09 19:04:25 +04:00
|
|
|
#define MAXIM_MANUFACTURER_ID 0x004D
|
2010-07-09 03:27:17 +04:00
|
|
|
#define MAX_6604_DEVICE_ID 0x3E00
|
2018-02-22 13:09:12 +03:00
|
|
|
#define MAX_6604_2_DEVICE_ID 0x5400
|
2010-07-09 03:27:17 +04:00
|
|
|
#define MAX_6604_MASK 0xFFFF
|
2009-05-09 19:04:25 +04:00
|
|
|
|
Reviewed and OK'd by pgoyette:
- Add support for Atmel AT30TS00, AT30TSE004, Giantec GT30TS00, GT34TS02,
Microchip MCP9804, MCP98244, IDT TS3000GB[02], TS3001GB2, TSE2004GB2,
and On Semiconductor CAT34TS04. Taken from OpenBSD.
- Add IDT TSE2002GB2.
- Check the temperature resolution field in the capability register instead
of the hard coded value in the match table. With this change, some devices'
temperature resolution would be fixed.
- The resolution register is a vendor specific register.
- All of IDT devices have the resolution register.
- The address of the resolution register of Microchip MCP98244 is different
from other Microchip devices.
- Show accuracy, range, resolution, high voltage standoff and shutdown with
aprint_normal().
- Show timeout with aprint_debug().
2016-07-26 10:30:16 +03:00
|
|
|
/* Microchip */
|
2009-05-09 19:04:25 +04:00
|
|
|
#define MCP_MANUFACTURER_ID 0x0054
|
Reviewed and OK'd by pgoyette:
- Add support for Atmel AT30TS00, AT30TSE004, Giantec GT30TS00, GT34TS02,
Microchip MCP9804, MCP98244, IDT TS3000GB[02], TS3001GB2, TSE2004GB2,
and On Semiconductor CAT34TS04. Taken from OpenBSD.
- Add IDT TSE2002GB2.
- Check the temperature resolution field in the capability register instead
of the hard coded value in the match table. With this change, some devices'
temperature resolution would be fixed.
- The resolution register is a vendor specific register.
- All of IDT devices have the resolution register.
- The address of the resolution register of Microchip MCP98244 is different
from other Microchip devices.
- Show accuracy, range, resolution, high voltage standoff and shutdown with
aprint_normal().
- Show timeout with aprint_debug().
2016-07-26 10:30:16 +03:00
|
|
|
#define MCP_9804_DEVICE_ID 0x0200
|
|
|
|
|
#define MCP_9804_MASK 0xFFFC
|
2010-07-09 03:27:17 +04:00
|
|
|
#define MCP_9805_DEVICE_ID 0x0000 /* Also matches MCP9843 */
|
|
|
|
|
#define MCP_9805_MASK 0xFFFE
|
|
|
|
|
#define MCP_98242_DEVICE_ID 0x2000
|
|
|
|
|
#define MCP_98242_MASK 0xFFFC
|
|
|
|
|
#define MCP_98243_DEVICE_ID 0x2100
|
|
|
|
|
#define MCP_98243_MASK 0xFFFC
|
Reviewed and OK'd by pgoyette:
- Add support for Atmel AT30TS00, AT30TSE004, Giantec GT30TS00, GT34TS02,
Microchip MCP9804, MCP98244, IDT TS3000GB[02], TS3001GB2, TSE2004GB2,
and On Semiconductor CAT34TS04. Taken from OpenBSD.
- Add IDT TSE2002GB2.
- Check the temperature resolution field in the capability register instead
of the hard coded value in the match table. With this change, some devices'
temperature resolution would be fixed.
- The resolution register is a vendor specific register.
- All of IDT devices have the resolution register.
- The address of the resolution register of Microchip MCP98244 is different
from other Microchip devices.
- Show accuracy, range, resolution, high voltage standoff and shutdown with
aprint_normal().
- Show timeout with aprint_debug().
2016-07-26 10:30:16 +03:00
|
|
|
#define MCP_98244_DEVICE_ID 0x2200
|
|
|
|
|
#define MCP_98244_MASK 0xFFFC
|
2018-02-22 13:09:12 +03:00
|
|
|
#define MCP2_MANUFACTURER_ID 0x1055 /* PCI-SIG manufacturer ID */
|
|
|
|
|
#define MCP2_EMC1501_DEVICE_ID 0x0842
|
|
|
|
|
#define MCP2_EMC1501_MASK 0xFFFF
|
2009-05-09 19:04:25 +04:00
|
|
|
|
Reviewed and OK'd by pgoyette:
- Add support for Atmel AT30TS00, AT30TSE004, Giantec GT30TS00, GT34TS02,
Microchip MCP9804, MCP98244, IDT TS3000GB[02], TS3001GB2, TSE2004GB2,
and On Semiconductor CAT34TS04. Taken from OpenBSD.
- Add IDT TSE2002GB2.
- Check the temperature resolution field in the capability register instead
of the hard coded value in the match table. With this change, some devices'
temperature resolution would be fixed.
- The resolution register is a vendor specific register.
- All of IDT devices have the resolution register.
- The address of the resolution register of Microchip MCP98244 is different
from other Microchip devices.
- Show accuracy, range, resolution, high voltage standoff and shutdown with
aprint_normal().
- Show timeout with aprint_debug().
2016-07-26 10:30:16 +03:00
|
|
|
#define SDTEMP_REG_MCP_RESOLUTION_9804 0x08 /* 9804, 9824[23] */
|
|
|
|
|
#define SDTEMP_REG_MCP_RESOLUTION_98244 0x09 /* 98244 */
|
2009-05-09 19:04:25 +04:00
|
|
|
|
Reviewed and OK'd by pgoyette:
- Add support for Atmel AT30TS00, AT30TSE004, Giantec GT30TS00, GT34TS02,
Microchip MCP9804, MCP98244, IDT TS3000GB[02], TS3001GB2, TSE2004GB2,
and On Semiconductor CAT34TS04. Taken from OpenBSD.
- Add IDT TSE2002GB2.
- Check the temperature resolution field in the capability register instead
of the hard coded value in the match table. With this change, some devices'
temperature resolution would be fixed.
- The resolution register is a vendor specific register.
- All of IDT devices have the resolution register.
- The address of the resolution register of Microchip MCP98244 is different
from other Microchip devices.
- Show accuracy, range, resolution, high voltage standoff and shutdown with
aprint_normal().
- Show timeout with aprint_debug().
2016-07-26 10:30:16 +03:00
|
|
|
/* NXP Semiconductors */
|
|
|
|
|
/* According to datasheets, SE97 and SE98 have same ID */
|
2009-05-09 19:04:25 +04:00
|
|
|
#define NXP_MANUFACTURER_ID 0x1131
|
2010-07-09 03:27:17 +04:00
|
|
|
#define NXP_SE98_DEVICE_ID 0xA100
|
|
|
|
|
#define NXP_SE98_MASK 0xFFFC
|
|
|
|
|
#define NXP_SE97_DEVICE_ID 0xA200
|
|
|
|
|
#define NXP_SE97_MASK 0xFFFC
|
2009-05-09 19:04:25 +04:00
|
|
|
|
Reviewed and OK'd by pgoyette:
- Add support for Atmel AT30TS00, AT30TSE004, Giantec GT30TS00, GT34TS02,
Microchip MCP9804, MCP98244, IDT TS3000GB[02], TS3001GB2, TSE2004GB2,
and On Semiconductor CAT34TS04. Taken from OpenBSD.
- Add IDT TSE2002GB2.
- Check the temperature resolution field in the capability register instead
of the hard coded value in the match table. With this change, some devices'
temperature resolution would be fixed.
- The resolution register is a vendor specific register.
- All of IDT devices have the resolution register.
- The address of the resolution register of Microchip MCP98244 is different
from other Microchip devices.
- Show accuracy, range, resolution, high voltage standoff and shutdown with
aprint_normal().
- Show timeout with aprint_debug().
2016-07-26 10:30:16 +03:00
|
|
|
/* Analog Devices */
|
2009-05-09 19:04:25 +04:00
|
|
|
#define ADT_MANUFACTURER_ID 0x11D4
|
2018-02-22 13:09:12 +03:00
|
|
|
#define ADT_7408_DEVICE_ID 0x0800 /* e.g. 0x0801 */
|
|
|
|
|
#define ADT_7408_MASK 0xFFF0
|
2009-05-09 19:04:25 +04:00
|
|
|
|
Reviewed and OK'd by pgoyette:
- Add support for Atmel AT30TS00, AT30TSE004, Giantec GT30TS00, GT34TS02,
Microchip MCP9804, MCP98244, IDT TS3000GB[02], TS3001GB2, TSE2004GB2,
and On Semiconductor CAT34TS04. Taken from OpenBSD.
- Add IDT TSE2002GB2.
- Check the temperature resolution field in the capability register instead
of the hard coded value in the match table. With this change, some devices'
temperature resolution would be fixed.
- The resolution register is a vendor specific register.
- All of IDT devices have the resolution register.
- The address of the resolution register of Microchip MCP98244 is different
from other Microchip devices.
- Show accuracy, range, resolution, high voltage standoff and shutdown with
aprint_normal().
- Show timeout with aprint_debug().
2016-07-26 10:30:16 +03:00
|
|
|
/* IDT */
|
2010-07-12 07:39:05 +04:00
|
|
|
#define IDT_MANUFACTURER_ID 0x00B3
|
2010-07-11 19:16:41 +04:00
|
|
|
#define IDT_TS3000B3_DEVICE_ID 0x2903 /* Also matches TSE2002B3 */
|
|
|
|
|
#define IDT_TS3000B3_MASK 0xFFFF
|
Reviewed and OK'd by pgoyette:
- Add support for Atmel AT30TS00, AT30TSE004, Giantec GT30TS00, GT34TS02,
Microchip MCP9804, MCP98244, IDT TS3000GB[02], TS3001GB2, TSE2004GB2,
and On Semiconductor CAT34TS04. Taken from OpenBSD.
- Add IDT TSE2002GB2.
- Check the temperature resolution field in the capability register instead
of the hard coded value in the match table. With this change, some devices'
temperature resolution would be fixed.
- The resolution register is a vendor specific register.
- All of IDT devices have the resolution register.
- The address of the resolution register of Microchip MCP98244 is different
from other Microchip devices.
- Show accuracy, range, resolution, high voltage standoff and shutdown with
aprint_normal().
- Show timeout with aprint_debug().
2016-07-26 10:30:16 +03:00
|
|
|
#define IDT_TS3000GB0_DEVICE_ID 0x2913
|
|
|
|
|
#define IDT_TS3000GB0_MASK 0xFFFF
|
2016-08-03 06:35:24 +03:00
|
|
|
#define IDT_TS3000GB2_DEVICE_ID 0x2912 /* Also matched TSE2002GB2 */
|
Reviewed and OK'd by pgoyette:
- Add support for Atmel AT30TS00, AT30TSE004, Giantec GT30TS00, GT34TS02,
Microchip MCP9804, MCP98244, IDT TS3000GB[02], TS3001GB2, TSE2004GB2,
and On Semiconductor CAT34TS04. Taken from OpenBSD.
- Add IDT TSE2002GB2.
- Check the temperature resolution field in the capability register instead
of the hard coded value in the match table. With this change, some devices'
temperature resolution would be fixed.
- The resolution register is a vendor specific register.
- All of IDT devices have the resolution register.
- The address of the resolution register of Microchip MCP98244 is different
from other Microchip devices.
- Show accuracy, range, resolution, high voltage standoff and shutdown with
aprint_normal().
- Show timeout with aprint_debug().
2016-07-26 10:30:16 +03:00
|
|
|
#define IDT_TS3000GB2_MASK 0xFFFF
|
|
|
|
|
#define IDT_TS3001GB2_DEVICE_ID 0x3001
|
|
|
|
|
#define IDT_TS3001GB2_MASK 0xFFFF
|
|
|
|
|
#define IDT_TSE2004GB2_DEVICE_ID 0x2214
|
|
|
|
|
#define IDT_TSE2004GB2_MASK 0xFFFF
|
|
|
|
|
|
|
|
|
|
#define SDTEMP_REG_IDT_RESOLUTION 0x08 /* 2002 */
|
|
|
|
|
|
|
|
|
|
/* STmicroelectronics */
|
2009-05-09 19:04:25 +04:00
|
|
|
#define STTS_MANUFACTURER_ID 0x104A
|
2010-07-09 03:27:17 +04:00
|
|
|
#define STTS_424_DEVICE_ID 0x0101
|
|
|
|
|
#define STTS_424_MASK 0xFFFF
|
|
|
|
|
#define STTS_424E_DEVICE_ID 0x0000
|
|
|
|
|
#define STTS_424E_MASK 0xFFFE
|
2014-01-09 20:51:05 +04:00
|
|
|
#define STTS_3000_DEVICE_ID 0x0200
|
|
|
|
|
#define STTS_3000_MASK 0xFFFF
|
|
|
|
|
#define STTS_2002_DEVICE_ID 0x0300
|
|
|
|
|
#define STTS_2002_MASK 0xFFFF
|
|
|
|
|
#define STTS_2004_DEVICE_ID 0x2201
|
|
|
|
|
#define STTS_2004_MASK 0xFFFF
|
2009-05-09 19:04:25 +04:00
|
|
|
|
Reviewed and OK'd by pgoyette:
- Add support for Atmel AT30TS00, AT30TSE004, Giantec GT30TS00, GT34TS02,
Microchip MCP9804, MCP98244, IDT TS3000GB[02], TS3001GB2, TSE2004GB2,
and On Semiconductor CAT34TS04. Taken from OpenBSD.
- Add IDT TSE2002GB2.
- Check the temperature resolution field in the capability register instead
of the hard coded value in the match table. With this change, some devices'
temperature resolution would be fixed.
- The resolution register is a vendor specific register.
- All of IDT devices have the resolution register.
- The address of the resolution register of Microchip MCP98244 is different
from other Microchip devices.
- Show accuracy, range, resolution, high voltage standoff and shutdown with
aprint_normal().
- Show timeout with aprint_debug().
2016-07-26 10:30:16 +03:00
|
|
|
/* On Semiconductor (Catalyst) */
|
2009-05-09 19:04:25 +04:00
|
|
|
/* According to datasheets, both the CAT6095 and CAT34TS02 have the same ID */
|
|
|
|
|
#define CAT_MANUFACTURER_ID 0x1B09
|
2010-07-09 03:27:17 +04:00
|
|
|
#define CAT_34TS02_DEVICE_ID 0x0800
|
|
|
|
|
#define CAT_34TS02_MASK 0xFFE0
|
2015-05-20 03:43:28 +03:00
|
|
|
#define CAT_34TS02C_DEVICE_ID 0x0a00
|
2016-12-07 07:58:39 +03:00
|
|
|
#define CAT_34TS02C_MASK 0xFFFE
|
Reviewed and OK'd by pgoyette:
- Add support for Atmel AT30TS00, AT30TSE004, Giantec GT30TS00, GT34TS02,
Microchip MCP9804, MCP98244, IDT TS3000GB[02], TS3001GB2, TSE2004GB2,
and On Semiconductor CAT34TS04. Taken from OpenBSD.
- Add IDT TSE2002GB2.
- Check the temperature resolution field in the capability register instead
of the hard coded value in the match table. With this change, some devices'
temperature resolution would be fixed.
- The resolution register is a vendor specific register.
- All of IDT devices have the resolution register.
- The address of the resolution register of Microchip MCP98244 is different
from other Microchip devices.
- Show accuracy, range, resolution, high voltage standoff and shutdown with
aprint_normal().
- Show timeout with aprint_debug().
2016-07-26 10:30:16 +03:00
|
|
|
#define CAT_34TS04_DEVICE_ID 0x2200
|
|
|
|
|
#define CAT_34TS04_MASK 0xFFFF
|
2009-05-09 19:04:25 +04:00
|
|
|
|
|
|
|
|
#endif /* _DEV_I2C_SDTEMPREG_H */
|
